Antifouling
Mostrando 1-12 de 29 artigos, teses e dissertações.
-
1. Cuprous oxide nanoparticles: preparation and evaluation of antifouling activity
There are few methods to obtain uniform and well dispersed cuprous oxide nanoparticles, which limits its application widely. In this research, an improved method to prepare nanoparticles was introduced. Cuprous oxides were prepared by the reduction of cupric nitrate, with hydrazine hydrate as a reductant in the presence of glucose. The nanoparticles formed h
Quím. Nova. Publicado em: 15/08/2019
-
2. Protección antiincrustante de estructuras sumergidas mediante recubrimientos formulados con 7-hidroxi-4-metilcumarina
ABSTRACT Biofouling settlement on submerged structures such as ships, buoys, farms, off-shore platforms and meteorological stations induces economic losses as a consequence of material deterioration and withdraw from service. Environmental regulations focus on the use of environmental friendly products to replace metallic biocides included in antifouling pai
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Síntesis y caracterización de “tanatos” de lantano como inhibidores de la corrosión
ABSTRACT Tannins are polyphenols synthesized by plants. They are found in Quebracho (Schinopsis Balansae) wood, Tara (Caesalpinia spinosa) fruits, etc. They have been incorporated in the coating industry as "antifouling" agents and as corrosion inhibitors in acidic solutions. Moreover, lanthanum solutions have a great inhibitory effect over SAE 1010 steel co
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Efecto inhibidor del dióxido de germanio sobre el biofouling del puerto de Mar del Plata
ABSTRACT Marine biofouling on any new material immersed in seawater can lead to extra costs due to increased maintenance, or/and even mechanical wear, and/or biodeterioration that require costly antifouling measures. Fouling organisms growing on immersed manmade surfaces affect hulls, piers, buoys, aquaculture and pipes mainly. Following adsorption of a cond
Matéria (Rio J.). Publicado em: 05/03/2018
-
5. Avaliação da contaminação por tributil-estanho baseada em imposex em Stramonita rustica (Mollusca: Gastropoda) ao longo do Litoral Sul da Bahia
Resumo Este estudo investigou os efeitos de tributil-estanho (TBT) sobre a morfologia do sistema genital do gastrópode Stramonita rustica (Lamarck, 1822) no Litoral Sul da Bahia, Brasil. Para isso, 330 espécimens foram coletados durante o verão de 2014 em oito pontos de amostragem, para verificar se os órgãos sexuais masculinos tinham se desenvolvido pa
Braz. J. Biol.. Publicado em: 15/08/2016
-
6. Using Conducting Polymers as Active Agents for Marine Antifouling Paints
Antifouling coatings were prepared with paints containing polyaniline (PAni) and derivatives as active pigment, and evaluated by antifouling performance on metallic or polyvinyl chloride substrates. The paints, PAni and its derivatives were characterized by FT-IR spectrophotometry, thermogravimetric analysis, electrical conductivity and scanning electron mic
Mat. Res.. Publicado em: 24/11/2015
-
7. Hacia una reducción del contenido decobre en pinturas antiincrustantes
ABSTRACTBiofouling leads to deterioration of any submerged material. The most widespread method for control is the application of cuprous oxide antifouling paints which are toxic. For this reason non-toxic natural products could be combined with small amounts of copper to diminish its contribution to the environment.Thymol is isolated from essential oils of
Matéria (Rio J.). Publicado em: 2015-09
-
8. GLICEROFOSFOLIPÍDIOS SINTÉTICOS PARA USO COMO ADITIVO BIOCIDA EM TINTAS ANTI‑INCRUSTANTE
AbstractThis paper presents a technological innovation that uses a subclass of glycerophospholipids as a booster biocide in antifouling paint. These glycerophospholipid PAF-analogs are economically and environmentally viable compounds because they are synthesized from a metal-free raw material source-soybean lecithin. The synthesis, which involves transester
Quím. Nova. Publicado em: 2015-08
-
9. Nanostructured Titanium Film Deposited by Pulsed Plasma Magnetron Sputtering (Pdms) on a High Voltage Ceramic Insulator for Outdoor Use
In this study, the cold plasma technique was used to produce nanometric titanium films with hydrophobic and anti-fouling properties. The films where deposited on porcelain electrical insulators surfaces to minimize the effects of leakage current. The magnetron sputtering technique was used with a target of pure titanium sheet, and argon as the ionization gas
Mat. Res.. Publicado em: 2015-08
-
10. Chemical and biological aspects of octocorals from the Brazilian coast
This review explores the chemical and biological aspects/results reported in the literature of the octocoral species collected at the Brazilian Coast. This article summarizes the biological activities (including pharmacological, antifouling and others related to chemical ecology) for the compounds and/or extracts described elsewhere. Data and references of c
Rev. bras. farmacogn.. Publicado em: 2014-08
-
11. The influence of salinity and matrix effect in the determination of antifouling biocides in estuarine waters of Patos Lagoon (southern Brazil)
Um método para determinação de diuron e irgarol utilizando extração em fase sólida (SPE) com C18 e cromatografia líquida acoplada a espectrometria de massas com ionização por eletronebulização foi otimizado, validado e aplicado em amostras de águas estuarinas e costeiras sob influência dos portos de Rio Grande. Os impactos da pré-filtração e
J. Braz. Chem. Soc.. Publicado em: 2014-07
-
12. Marine-friendly antifouling coating based on the use of a fatty acid derivative as a pigment
This study was devoted to examining the application of copper dodecanoate as a non-contaminant antifouling pigment due to its low copper content and fatty acid nature. For this purpose, antifouling paints with mono-component epoxy resin and rosin matrixes were formulated, and their antifouling efficiency was evaluated. Before its incorporation into the diffe
Mat. Res.. Publicado em: 18/03/2014