A rugosidade superficial da peça em processos de torneamento : criterios de fim de vida da ferramenta e fatores de influencia
AUTOR(ES)
Anselmo Eduardo Diniz
DATA DE PUBLICAÇÃO
1989
RESUMO
The purpose of this research is the study of the surface roughness of turned workpieces. One of the specific purpose is the possibility of using the workpiece surface roughness as a tool life criterion of single point carbide tools. The study of influence of cutting speed, feed and tool wear is another specific purpose. Several turning tests were performed with ABNT 1045 steel using tests were several cutting speeds and feeds. Some of these performed five or ten times and the surface roughness of the workpieces were measured using Ra and Rmax as parameters. Besides, the wear of several tools were measured too. One of the most important conclusions of this research is that and Rmax the tool life prediction using limit values of Ra is a reliable procedure and can he used under industrial conditions
ASSUNTO(S)
tornearia engenharia de produção ferramentas
ACESSO AO ARTIGO
http://libdigi.unicamp.br/document/?code=000047604Documentos Relacionados
- Análise da rugosidade superficial de barras de aço SAE 1045 após torneamento
- Estudo da relação entre velocidade de corte, desgaste de ferramenta, rugosidade e forças de usinagem em torneamento com ferramenta de metal duro
- Influencia do numero de coccões sobre a rugosidade superficial da porcelana odontologica
- Influencia das rugosidades superficiais da peça e da ferramenta no processo de extrusão hidrostatica
- Investigação da influência da rugosidade superficial em implantes odontológicos de titânio, obtidas por jateamento abrasivo e a laser Nd-YAG.