Effects of etching and adhesive applications on the bond strength between composite resin and glass-ionomer cements
AUTOR(ES)
Pamir, Tijen, Şen, Bilge Hakan, Evcin, Özgür
FONTE
J. Appl. Oral Sci.
DATA DE PUBLICAÇÃO
2012-12
RESUMO
OBJECTIVE: This study determined the effects of various surface treatment modalities on the bond strength of composite resins to glass-ionomer cements. MATERIAL AND METHODS: Conventional (KetacTM Molar Quick ApplicapTM) or resin-modified (PhotacTM Fil Quick AplicapTM) glass-ionomer cements were prepared. Two-step etch-rinse & bond adhesive (AdperTM Single Bond 2) or single-step self-etching adhesive (AdperTM PromptTM L-PopTM) was applied to the set cements. In the etch-rinse & bond group, the sample surfaces were pre-treated as follows: (1) no etching, (2) 15 s of etching with 35% phosphoric acid, (3) 30 s of etching, and (4) 60 s of etching. Following the placement of the composite resin (FiltekTM Z250), the bond strength was measured in a universal testing machine and the data obtained were analyzed with the two-way analysis of variance (ANOVA) followed by the Tukey's HSD post hoc analysis (p=0.05). Then, the fractured surfaces were examined by scanning electron microscopy. RESULTS: The bond strength of the composite resin to the conventional glass-ionomer cement was significantly lower than that to the resin-modified glass-ionomer cement (p<0.001). No significant differences were determined between the self-etching and etch-rinse & bond adhesives at any etching time (p>0.05). However, a greater bond strength was obtained with 30 s of phosphoric acid application. CONCLUSIONS: The resin-modified glass-ionomer cement improved the bond strength of the composite resin to the glass-ionomer cement. Both etch-rinse & bond and self-etching adhesives may be used effectively in the lamination of glass-ionomer cements. However, an etching time of at least 30 s appears to be optimal.
Documentos Relacionados
- Effect of resin-modified glass-ionomer cement lining and composite layering technique on the adhesive interface of lateral wall
- Effect of light curing unit on resin-modified glass-ionomer cements: a microhardness assessment
- Influence of thicknesses of smear layer on the transdentinal cytotoxicity and bond strength of a resin-modified glass-ionomer cement
- In vitro interactions between lactic acid solution and art glass-ionomer cements
- Mechanical and optical properties of conventional restorative glass-ionomer cements - a systematic review