Experimental Development of Dual Phase Steel Laser-arc Hybrid Welding and its Comparison to Laser and Gas Metal Arc Welding
AUTOR(ES)
Antunes, Wagner Duarte, Lima, Milton Sergio Fernandes de
FONTE
Soldag. insp.
DATA DE PUBLICAÇÃO
2016-09
RESUMO
Abstract Dual phase DP600 steels have been used in many automobile structures and laser welding has been the standard method for the joining of different sections. This work proposed a comparison between laser welding with arc welding (GMAW) and with hybrid laser-arc welding in order to access the microstructures and the mechanical behavior. The laser and hybrid welds are competitive in terms of microstructure and mechanical behavior, presenting both acceptable and tough welds. The maximum ductility of the laser and hybrid welds are very similar, around 14%, and near to the values observed in the base material. The GMAW presents low ductility due to the softening caused by tampering of the martensite, and thus is unacceptable as the welding procedure.
Documentos Relacionados
- Occupational asthma due to gas metal arc welding on mild steel.
- Metal transfer in the aluminum gas metal arc welding
- Stainless steel manual metal arc welding fumes in rats.
- Replacement of Gas Metal Arc Welding by Friction Welding for Joining Tubes in the Hydraulic Cylinders Industry
- Advances of orbital gas tungsten arc welding for Brazilian space applications - experimental setup