Otimização dos parâmetros de extração para determinação multiresíduo de pesticidas em amostras de água empregando microextração em fase sólida
AUTOR(ES)
Komatsu, Emy, Vaz, Jorge Moreira
FONTE
Química Nova
DATA DE PUBLICAÇÃO
2004-10
RESUMO
In this study the factors that affect the extraction of pesticide residues from water samples for their determination by solid-phase micro-extraction (SPME) and GC/MS were optimized. The fiber polymer, the extraction mode, the ionic strength, the stirring rate, the pH and the extraction time were the most significant parameters evaluated. The recovery obtained with the proposed method ranged from 94 to 110% and the sensitivity of the method, determined by calculating the detection limit (DL), ranged from 0.004 to 0.1 mug l-1. The results obtained with spiked real samples, at the 0.1 mug l-1 level, showed acceptable conformity with the expected values.
Documentos Relacionados
- Otimização e validação de métodos analíticos para determinação de BTEX em água utilizando extração por headspace e microextração em fase sólida
- AVALIAÇÃO DE DIFERENTES SORVENTES PARA EXTRAÇÃO EM FASE SÓLIDA DE PESTICIDAS EM ÁGUA.
- Estrógenos em água: otimização da extração em fase sólida utilizando ferramentas quimiométricas
- Extração em fase sólida (SPE) e micro extração em fase sólida (SPME) de piretróides em água
- Análise de pesticidas organoclorados em água usando a microextração em fase sólida por headspace com cromatografia gasosa e espectrometria de massas