Automotive Tests
Mostrando 1-12 de 49 artigos, teses e dissertações.
-
1. Proposição de um Modelo Empírico para Determinação das Temperaturas Críticas Durante Resfriamento Contínuo em Zonas Termicamente Afetadas de Aços IF Soldados pelo Processo TIG
Resumo Aços IF são amplamente empregados na indústria automobilística. No decorrer das aplicações de soldagem, eles passam pela transformação de fase austenita (γ) → ferrita (α) que ocorre por nucleação e crescimento de grão e, em condições isotérmicas, é descrita pela equação JMAK. Todavia, as transformações de fases pós-soldagem ac
Soldag. insp.. Publicado em: 23/09/2019
-
2. Aceite residual automotriz como aditivo en mezclas de hormigón: Si es factible su uso
ABSTRACT Finding a use for Automotive Residual Oil (ARO) is preponderant for society, since one liter of this liquid is capable of contaminating one million liters of drinking water, without counting the damages to agricultural soils and groundwater. The purpose of this work is to study the physical and mechanical properties of concrete by incorporating ARA
Matéria (Rio J.). Publicado em: 10/06/2019
-
3. Optimización del proceso RSW para acero DP 1000
ABSTRACT In recent times new materials have been introduced in automobiles construction in order to reduce their weight and consequently fuel consumption and emissions level. Among them are Dual Phase (DP) steels, constituted by a ferritic matrix with martensite islands. Resistance Spot Welding (RSW) is the most commonly used welding process in the automotiv
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Vida a fatiga de uniones soldadas mediante PAW de aceros microaleados al boro
ABSTRACT In the last years microalloyed boron steels have been adopted in the automotive industry to achieve weight reductions. Namely, they are used as load-bearing elements such as pillars and reinforcements, in a quenched and tempered (QT) condition with tensile strength ranging from 800 to 1300 MPa. Dual-Phase (DP) steels have also been introduced in thi
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Study of Mechanical and Wear Behaviour of Hyper-Eutectic Al-Si Automotive Alloy Through Fe, Ni and Cr Addition
Effect of Fe, Ni and Cr addition on the wear behavior of hyper-eutectic Al-Si automotive alloy has been studied. Dry sliding wear tests have been conducted using pin-on-disc wear testing machine under normal loads of 20N and constant sliding speed of 0.64 ms-1. Influence of Fe addition to the base alloy increases the wear rate due to the formation of needle
Mat. Res.. Publicado em: 11/06/2018
-
6. Probability Analysis in Determining the Behaviour of Variable Amplitude Strain Signal Based on Extraction Segments
Abstract This paper focuses on analysis in determining the behaviour of variable amplitude strain signals based on extraction of segments. The constant Amplitude loading (CAL), that was used in the laboratory tests, was designed according to the variable amplitude loading (VAL) from Society of Automotive Engineers (SAE). The SAE strain signal was then edited
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
7. Behaviour under Impact of Mixed Adhesive Joints for the Automotive Industry
Abstract The automotive industry is increasingly using adhesive joints bonding advanced lightweight materials to reduce vehicle weight. Strength under impact loadings is a major concern for this application and mixed adhesive joints can effectively improve the joints by combining stiffness and flexibility on the same overlap. This work introduces and studies
Lat. Am. j. solids struct.. Publicado em: 2016-05
-
8. Effects of Adding Some Natural Substances to Biodiesel to Control its Effect on Carbon Steel Corrosion
Biodiesel consists of long-chain fatty acid esters and it presents relatively inert behavior right after its production. However, structural changes occur during its storage, as this fuel has low oxidative stability, fact that increases its corrosivity. The problem of corrosion has become increasingly relevant due to the Government's policy of setting a grad
Mat. Res.. Publicado em: 23/10/2015
-
9. Padrões baseados em metas: uma abordagem quantitativa aplicada à emissão de gases por veículos marítimos e automotivos. / Goal based standards: a quantitative approach applied to gases emissions of marine and automotive
Este trabalho propõe um método com base no planejamento estatístico de testes de confiabilidade para proporcionar um tratamento quantitativo aos dois primeiros níveis da abordagem de padrões baseados em metas (Goal-Based Standards). O uso do método é demonstrado em dois exemplos práticos, através da sua aplicação na meta de confiabilidade dos comp
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/02/2012
-
10. Polyamide worm gear: manufacturing and performance
The focus of this paper is to establish a characterisation method for seven polyamide (PA) grades to determine the major material to manufacture an automotive worm gear. The composite properties were measured according to the worm gear loadings: tensile strength, Young's modulus, abrasion and impact resistance. They were also correlated to the PA moisture ab
Materials Research. Publicado em: 07/06/2012
-
11. Pó de borracha reutilizado na confecção de compostos de borracha natural para a produção de peças de engenharia do setor automotivo
Due to the cross-linked structure and the presence of antidegradants, rubber products decomposition is very hard and the disposal of waste material has been caused many environmental problems. Therefore, rubber recycling and the use of it as raw material in fresh rubber compounds are strongly necessary to achieve more sustainable technological projects. The
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
12. Estudo da relação entre propriedades de compósitos de fricção aplicados a sistemas de freio a disco e a propensão à ocorrência de Squeal Noise
Automotive brake systems are very often susceptible to generate high frequency noise as a result of a self excited vibration. This phenomenon is generically nominated brake squeal noise and is the subject of many studies which intend to identify and describe its exciting mechanism and to propose counter measures to avoid its occurrence. One key subject yet t
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012