Boride Layers
Mostrando 1-7 de 7 artigos, teses e dissertações.
-
1. Effect of Boride Incubation Time During the Formation of Fe2B Phase
Our present study focuses on the numerical simulation of the boronized layer growth kinetics on the iron substrate of the XC38 steel, the boronizing treatment is performed in a liquid medium composed of borax and silicon carbide. We mainly calculated the incubation time of the boronized layer formation. Aimed at estimating the boronizing treatment kinetics o
Mat. Res.. Publicado em: 27/11/2017
-
2. Effect of Boride Layer on PM HSS AISI M2 on the Mechanisms Acting in the Transverse Rupture Strength Test
Herein, it was conducted a study in order to examine the main fracture characteristics in the transverse rupture strength test (TRS) of a high speed steel (HSS) AISI M2 produced by powder metallurgy (PM) and with boriding treatment. Four conditions have been studied: as-sintered, borided, normalized and borided + TiN. The TRS tests were conducted in accordan
Mat. Res.. Publicado em: 06/11/2017
-
3. Microstructure and Mechanical Properties of Borided Inconel 625 Superalloy
ABSTRACT The Ni- based superalloy Inconel 625 is extensively used owing to its high strength, excellent fabricability, good weldability and outstanding resistance to high temperature corrosion against aggressive environments. However, despite its unique properties and extensive use, its wear resistance is in some cases unsatisfactory. In this study, Inconel
Matéria (Rio J.). Publicado em: 22/06/2017
-
4. Investigation of Adhesion and Tribological Behavior of Borided AISI 310 Stainless Steel
In the present study, the effects of the boriding process on adhesion and tribological properties of AISI 310 steel were investigated. Boriding was performed in a solid medium consisting of Ekabor-II powders at 1123 and 1323K for 2 and 6 h. The boride layer was characterized by optical microscopy, the X-ray diffraction technique and the micro-Vickers hardnes
Matéria (Rio J.). Publicado em: 2016-03
-
5. Corrosion Behavior and Microstructure of Borided Tool Steel
In the present study, the corrosion behaviors of borides formed on cold work tool steel have been investigated in a 4% M HCl acid solution. Boriding was performed in a solid medium consisting of Ekabor-II powders at 850 and 950°C for 6 h. The boride layer was characterized by SEM, EDS, XRD and the hardness tester. XRD analysis of boride layers on the surfac
Matéria (Rio J.). Publicado em: 2015-06
-
6. Filmes intermediários para deposição de diamantes CVD sobre aços / Intermediate films for diamond deposition on steel
The present work is inserted in the area of Chemical Vapor Deposition of Diamond thin and freestanding films. The CVD diamond deposition on steel substrates is still a great challenge to overcome. Iron-like materials present negative effects for the CVD diamond growth process, as catalytic effects in the preferential nucleation of the graphitic phase and hig
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/08/2006
-
7. "Avaliação de camadas de carbonetos e de boretos produzidas nos aços AISI H13 e D2 por meio de tratamentos termo-reativos" / EVALUATION OF CARBIDE AND BORIDE LAYERS PRODUCED ON AISI H13 AND D2 STEELS BY THERMO-REACTIVE TREATMENTS
Neste trabalho, camadas de elevadas durezas e resistentes ao desgaste, constituídas de NbC, VC ou Fe-B, foram produzidas nos aços AISI H13 e D2, por meio de tratamentos termo-reativos em banhos de bórax, com adição de Fe-Nb, Fe-V, Fe-Ti e Al. As amostras foram caracterizadas por meio de microscopias ótica e eletrônica de varredura com EDS (espectrosco
Publicado em: 2006