Boron Concentration
Mostrando 1-12 de 75 artigos, teses e dissertações.
-
1. Selective formation of neodymium phosphate from iron-neodymium magnet waste
Abstract Neodymium-iron-boron alloy, Nd2Fe14B, is used as a material for magnets. Neodymium is one of the valuable and expensive rare earth elements and is often recovered to reduce costs and environmental impact. Recently, a method for recovering neodymium as neodymium phosphate from mixed solutions was reported. This method was very useful because the main
Cerâmica. Publicado em: 2022
-
2. DETERMINATION OF TOTAL AND BIOACCESSIBLE ELEMENTS IN TEMPORARY ADHESIVE TATTOOS USED BY CHILDREN AND ADULTS
The presence of bioaccessible potentially-toxic elements in five different brands of temporary tattoos (packaged with bubble gums) aimed at children and three product brands used by young and adult audiences were analyzed in accordance with the Brazilian Organization of Technical Standards (ABNT) and International Organization for Standardization (ISO) for t
Química Nova. Publicado em: 2022
-
3. Aplicação da técnica de CAMQL na retificação cilíndrica externa do aço AISI 4340 utilizando rebolo de CBN
RESUMO O processo de retificação possui como características o bom acabamento superficial e alta precisão dimensional e geométrica. Assim, peças usinadas por este processo possuem um alto valor agregado por se tratar de um processo de acabamento que é comumente realizado nas últimas etapas da fabricação. Um fator limitador do processo de retificaç
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. BDD-Electrolysis of Oxalic Acid in Diluted Acidic Solutions
Boron doped diamond films (BDD) are the most studied electrocatalytic materials and their efficiency for removing organic compounds is attributed to their ability to produce a large amount of hydroxyl radicals by the electrolysis of water. However, some organic compounds are easy to degrade than others, as well as they also interact with BDD surface. Thus, i
J. Braz. Chem. Soc.. Publicado em: 04/07/2019
-
5. A Meta-Analysis of the Impact of Foliar Feeding of Micronutrients on Productivity and Revenue Generation of Forage Crops
RESUMO: A garantia de segurança alimentar frente ao aumento da população exige incremento proporcional da produção de leite e carne, que por sua vez depende da nutrição animal. Avaliar a adubação foliar com micronutrientes para produção de quantidades substanciais de forragem de boa qualidade deve ser um objetivo da agricultura moderna, com fins l
Planta daninha. Publicado em: 10/06/2019
-
6. Arbuscular mycorrhizal fungi and auxin associated with microelements in the development of cuttings of Varronia leucocephala
RESUMO Varronia leucocephala é uma planta utilizada pela população para fins terapêuticos. Um dos maiores problemas para produção de mudas dessa espécie é o baixo percentual de enraizamento. Objetivou-se estabelecer um protocolo de enraizamento de estacas de V. leucocephala utilizando fitorreguladores e microelementos associados com fungos micorrízi
Rev. bras. eng. agríc. ambient.. Publicado em: 2019-03
-
7. Estudio de la cinética de la disolución de los barros residuales de las industrias borateras con soluciones de glicerina
ABSTRACT In this paper the dissolution kinetics of industrial boron wastes residual with glycerin solutions (C3H8O3), effluent from the biodiesel industry, with the aim of enhancing the utilization both wastes, were investigated. It is based on the complexation of boron with the polyol. The dissolution is carried out in a batch reactor at atmospheric pressur
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Kinetics of Formation of Fe2B Layers on AISI S1 Steel
In the present work, the AISI S1 steel was pack-borided in the temperature range 1123-1273 K for 2- 8 h to form a compact layer of Fe2B at the material surface. A recent kinetic approach, based on the integral method, was proposed to estimate the boron diffusion coefficients in the Fe2B layers formed on AISI S1 steel in the temperature range 1123-1273 K. In
Mat. Res.. Publicado em: 16/07/2018
-
9. Influence of water in the MQL technique in the grinding of steel AISI 4340 using CBN wheels
Abstract Usually, machining employs cooling methods to avoid high temperatures. In most cases, the cutting fluid is applied with high flow and low pressures. This technique consumes a large amount of cutting fluid that causes serious problems in the environment and in the health of the worker. An alternative to the conventional cooling method is the Minimum
REM, Int. Eng. J.. Publicado em: 2018-07
-
10. SORÇÃO DE CO2 UTILIZANDO LÍQUIDO IÔNICO ADITIVADO COM EXTENSORES DE ÁREA SUPERFICIAL
The study of environmentally friendly CO2 sorption agents are growing due to the need of mitigate this gas from atmosphere. Ionic Liquids (ILs) present the advantage of having low vapor pressures and being chemically and thermally stable. Besides, their properties can be designed by varying the groups of the cation or anion. Yet, these compounds present a lo
Quím. Nova. Publicado em: 2018-06
-
11. Boron Isotopic Ratio in Brazilian Red Wines: a Potential Tool for Origin and Quality Studies?
For the first time, the boron isotopic ratio is reported for Brazilian red wines. The boron concentration, 11B/10B isotopic ratio and δ11B were determined in 89 red wines produced in Campanha Gaúcha, Serra Gaúcha (SG), and Vale dos Vinhedos (VV) in South Brazil and Vale do São Francisco (VSF) in Northeast Brazil. A broad boron concentration range, < 0.07
J. Braz. Chem. Soc.. Publicado em: 2017-10
-
12. Anodic Oxidation of Sulfide to Sulfate: Effect of the Current Density on the Process Kinetics
The kinetics of the conversion of sulfide to sulfate by electro-oxidation, using a boron-doped diamond (BDD) electrode was studied. Different applied current densities were tested, from 10 to 60 mA cm-2. The results showed that the electrochemical conversion of sulfide to sulfate occurs in steps, via intermediate production of other sulfur species. The oxida
J. Braz. Chem. Soc.. Publicado em: 2017-04