Ceramic Raw Material
Mostrando 1-12 de 53 artigos, teses e dissertações.
-
1. A review on the ceramic additive manufacturing technologies and availability of equipment and materials
Abstract Ceramic additive manufacturing allows the fabrication of small series of complex parts without the high costs of molds usually associated with traditional ceramic processing. Although research into ceramic 3D printing by all technologies started back in the 90s, its industrial application is still quite restricted when compared to polymers and metal
Cerâmica. Publicado em: 2022
-
2. The Tatuí Formation as a source of raw material in the ceramic pole of Santa Gertrudes (SP)
Abstract The importance of the Santa Gertrudes Ceramic Complex (SGCC) in the ceramic market is directly associated with the high quality of the Corumbataí Formation clays used in the manufacture of its products. Although the volumetric capacity of the Corumbataí Formation is able to meet the SGCC demand for the coming years, its industries are always in se
REM, Int. Eng. J.. Publicado em: 2020-03
-
3. Glass-ceramic produced with recycled glass
ABSTRACT The objective of this work is the production and characterization of glass-ceramic with recycled glass powder and 4% (w/w) of cerium dioxide. Eleven groups were defined with conformation pressure of 11.6 and 25.8 MPa, and cerium dioxide addition. The sintering temperatures of 650, 675, 700 and 750 °C were used. The raw material was formed into a mo
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Characterization and application of ceramic membranes prepared from Algerian kaolin
Resumo Neste estudo, um novo tipo de membrana cerâmica foi usado para a filtração de água com cor. A membrana foi preparada a partir de caulim argelino KT2 do tipo Milia. A escolha desta matéria-prima foi ditada pela sua abundância natural, para formar o suporte macroporoso preparado pela técnica de colagem. Uma camada de película fina funcional (com
Cerâmica. Publicado em: 14/11/2019
-
5. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Recycling ceramic waste as a raw material in sanitary ware production
Resumo Este estudo caracterizou o resíduo de louças sanitárias descartadas que não atendiam aos requisitos de qualidade. Para compreender a composição de tal resíduo, as amostras foram coletadas, processadas e caracterizadas. Este resíduo de cacos de louça cerâmica moídos foi usado para substituir o pó de granito utilizado nas massas cerâmicas e
Cerâmica. Publicado em: 15/08/2019
-
7. Chemical conversion of a solid body of the composite gypsum/polyhydroxybutyrate in hydroxyapatite/polyhydroxybutyrate
Resumo A transformação do gesso em hidroxiapatita permite agregar valor a essa matéria-prima, pois a cerâmica obtida possui alto valor comercial em relação ao gesso, enquanto o polímero acrescenta propriedades de biocompatibilidade e bioatividade ao biocompósito. Assim, compósitos de hidroxiapatita/poli-hidroxibutirato foram preparados a partir do g
Cerâmica. Publicado em: 15/08/2019
-
8. Peças Cerâmicas fabricadas usando pó de granito com adição dos produtos da combustão do carvão mineral: Caracterização Mecânica
RESUMO Foi estudada a viabilidade técnica da utilização de resíduos de granito como matéria prima na fabricação de corpos de prova cerâmicos, com adições dos Produtos da Combustão do Carvão Mineral (PCC’s) como fase reforço. Os materiais utilizados foram granito Asa Branca (RGAB) e os Produtos da Combustão do Carvão mineral (PCC´s), nas con
Matéria (Rio J.). Publicado em: 20/05/2019
-
9. Ceramic characterization of raw material with a high content of organic matter reduced by composting
Abstract The process of beneficiation of a peaty ceramic raw material extracted from the Poços de Caldas region, MG, through the composting method to reduce organic matter (OM) was analyzed. The raw materials used in separate piles were divided, keeping one of the samples pure (TP) and adding bovine wastes in the second (TB). The process lasted 6 months and
Cerâmica. Publicado em: 2019-01
-
10. Development of metakaolin and geopolymer proppants with nanocarbon materials
Abstract From the first hydraulic fracturing in the 40’s until nowadays, the techniques of each process step have evolved significantly. This study presents a new approach on the development of metakaolin (MK) and geopolymer based proppant with and without nanocarbon materials such as multi-walled carbon nanotubes and graphene oxide. For manufacturing the
Cerâmica. Publicado em: 2019-01
-
11. Resíduo do processo Kraft (dregs) como matéria-prima alternativa para cerâmica vermelha
Resumo Neste trabalho foi avaliada a utilização de dregs, um resíduo sólido inorgânico proveniente do processo Kraft, como matéria-prima alternativa em cerâmica vermelha. As matérias-primas foram caracterizadas por fluorescência de raios X, difração de raios X, distribuição de tamanho de partículas, análise térmica diferencial e termogravimé
Cerâmica. Publicado em: 2019-01
-
12. Evaluation of kaolin and bauxite from the Amazonian region addition on mechanical-, physical-, chemical properties and microstructural characterization of red ceramic industry clay of Manaus metropolitan region
ABSTRACT The present work investigated properties of red ceramic from the Amazonian region after the addition of kaolin and bauxite mixture with 0, 10, 20 and 30%wt. in red ceramic industry clay. Assessed mechanical properties were flexural strength and Young's modulus. The assessed physical properties were density and porosity. The microstructural images we
Matéria (Rio J.). Publicado em: 18/10/2018