Clay Dispersion
Mostrando 1-12 de 50 artigos, teses e dissertações.
-
1. Bionanocomposites of PLA/PBAT/organophilic clay: preparation and characterization
Abstract The objective of this study was to develop bionanocomposites from blends of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and from 3% and 6% bentonite clay. Initially, the bentonite clay was treated with Praepagen salt, and the properties of the modified clay were evaluated. After the organophilization of the clay was co
Polímeros. Publicado em: 04/11/2019
-
2. Soil conservation management with cover crops: effects on critical energy levels, release and dispersion of aggregates
ABSTRACT The normalized dispersion index (NDI) and the b/a index are commonly used to express the stability of aggregates measured by ultrasound. However, few studies have used the critical energy (CE) extracted from modeling to explain the effects of soil use and management on soil aggregation. The objective of this study was to evaluate the influence of so
Bragantia. Publicado em: 05/08/2019
-
3. Comparison of the Casagrande and Fall Cone Methods for Liquid Limit Determinations in Different Clay Soils
ABSTRACT The liquid limit (LL) is an important parameter for soil classification systems. The use of the cone penetrometer technique for measuring the liquid limit is an attractive alternative method since the percussion method is highly operator dependent. In this article, the importance of specifying the procedure and equipment used to determine the LL of
Rev. Bras. Ciênc. Solo. Publicado em: 10/07/2019
-
4. Charge sparsity: An index to quantify cation effects on clay dispersion in soils
ABSTRACT: Few approaches have been developed to measure the isolated effect of exchangeable cations on clay dispersion in soils. In this study, the charge sparsity (CS) index was proposed using the ratio between the cations hydrated ionic radius and valence. The index capacity to measure cation effects on clay dispersion in soils was also evaluated. Three Fe
Sci. agric. (Piracicaba, Braz.). Publicado em: 01/07/2019
-
5. Obtaining and characterizing dental hybrid composites with clay or silica nanoparticles and boron-aluminum-silicate glass microparticles
Abstract The aim of the present work was the obtaining and characterization of dental hybrid composites using nanoparticles (clay or silica) and boron-aluminum-silicate microparticles. We evaluated the dispersion of the nanofillers when changing their loading among 2.5%, 5%, 10% and 25% wt. Were tested, in the above quantities, four different types of nanofi
Polímeros. Publicado em: 27/06/2019
-
6. Influence of the chemical structure of different carboxymethylcelluloses on the performance of clay dispersions
Resumo Este trabalho teve como objetivo avaliar a influência da estrutura química da carboximetilcelulose (CMC) no desempenho reológico e de perda de filtrado de dispersões de argila. As dispersões foram preparadas com concentração fixa de argila bentonítica (15 g/350 mL de água) e diferentes concentrações de CMCs (0,5, 1,0, 2,0 g/350 mL de água)
Cerâmica. Publicado em: 2019-01
-
7. Preparation, Characterization and Photostability of Nanocomposite Films Based on Poly(acrylic acid) and Montmorillonite
Polyacrylic acid (PAA)/clay mineral (SWy-1) nanocomposites were prepared by intercalation in solution and their photostability was evaluated. For the nanocomposite films containing 5, 10 and 20 wt % in SWy-1 mass occurred intercalation along with some clay exfoliation, while for PAA/30%SWy-1, the intercalation of PAA chains into the clay interlayers was obse
Mat. Res.. Publicado em: 07/05/2018
-
8. Use of Amphiphilic Composites based on Clay/Carbon Nanofibers as Fillers in UHMWPE
In this work, it is proposed a new strategy to improve the dispersion of inorganic fillers in polymeric matrices by producing surface carbon nanostructures. Clay/carbon nanofibers particles were prepared and used as fillers to improve the mechanical and thermal properties of ultra-high molecular weight polyethylene (UHMWPE). Thermogravimetry (TG), differenti
J. Braz. Chem. Soc.. Publicado em: 2018-02
-
9. Carbon losses and soil property changes in ferralic Nitisols from Cuba under different coverages
ABSTRACT The transformation of primary forestlands into lands under cultivation exerts an impact on the physical and chemical properties of the soils, leading to loss of carbon from the soil. The aims of this study were (1) to estimate the impact of different land use on organic carbon stock (OC-stock) and (2) to determine the clay percentage, the dispersion
Sci. agric. (Piracicaba, Braz.). Publicado em: 2017-08
-
10. Surface and incorporated liming effects on clay dispersion, water availability, and aeration capacity of a Dystrudept soil
ABSTRACT Liming represents a management procedure that can affect the soil structure and its thermodynamic processes. In this context, the aims of this study were to assess (i) the effects of the surface and incorporated liming on the clay dispersion, soil water availability, and aeration capacity; (ii) the influence of soil chemical alterations in its physi
Bragantia. Publicado em: 05/06/2017
-
11. Soil Quality after Six Years of Paper Mill Industrial Wastewater Application
ABSTRACT The application of wastewater to irrigate soils may be an attractive option for paper mills, especially when the effluents can also provide nutrients to plants. Since there could be negative environmental effects, such activity must be preceded by a thorough evaluation of the consequences. The changes in soil quality of a Neossolo Flúvico Distrófi
Rev. Bras. Ciênc. Solo. Publicado em: 06/02/2017
-
12. Aggregate Stability in Soil with Humic and Histic Horizons in a Toposequence under Araucaria Forest
ABSTRACT Aggregate stability is one of the most important factors in soil conservation and maintenance of soil environmental functions. The objective of this study was to investigate the aggregate stability mechanisms related to chemical composition of organic matter in soil profiles with humic and histic horizons in a toposequence under Araucaria moist fore
Rev. Bras. Ciênc. Solo. Publicado em: 2017