Combustion Chamber
Mostrando 1-12 de 52 artigos, teses e dissertações.
-
1. Phase Separation and Development of the Microstructure for Stainless Steel to Copper Alloy Weld Joints Using a Fiber Laser
ABSTRACT Stainless steel and copper alloys joints are often applied in aerospace, marine and power industries where both high thermal and electrical conductivity (Cu) and corrosion resistance (steel) are required. In the aerospace industry, in particular for the combustion chamber of rocket engines, copper and steel combinations offer perfect materials selec
J. Aerosp. Technol. Manag.. Publicado em: 10/10/2019
-
2. Simulação computacional de dispositivos de mistura em câmara de combustão para gases de carbonização
Resumo O carvão vegetal proveniente de florestas plantadas é uma fonte de energia renovável utilizada na siderurgia do Brasil, todavia, em sua produção há liberação do gás de pirólise, que pode ser considerado um gás com baixo poder calorífico inferior. A sustentabilidade da produção de carvão vegetal tem demandado a queima destes gases, poden
Ciênc. Florest.. Publicado em: 30/09/2019
-
3. Numerical Study on Response Characteristics of Solid Rocket Pintle Motor
ABSTRACT: Pintle technology is currently a versatile technology used in a solid rocket motor (SRM) to control the desired thrust by changing the nozzle throat area, while effectively controlling the chamber pressure at the same time. The sudden movement of the pintle can induce rapid changes in the flow field and the occurrence of pressure oscillations insid
J. Aerosp. Technol. Manag.. Publicado em: 26/08/2019
-
4. Theoretical and Experimental Heat Transfer in Solid Propellant Rocket Engine
ABSTRACT: Accurate determination of heat flux is an important task not only in the designing aspect, but also in the performance analysis of rocket engines. In this purpose, this work deals with the heat flux determination in a combustion chamber through the inverse method. In this approach, the transient heat flux is determined from the experimental tempera
J. Aerosp. Technol. Manag.. Publicado em: 26/08/2019
-
5. MONITORING OF TRANSPORTATION NETWORK OF CARBONIZATION GASES IN COGENERATION PROJECTS
RESUMO O objetivo desse trabalho foi avaliar o desempenho e a eficiência de um sistema de transporte de gases da carbonização até um queimador. O sistema de transporte de gases da carbonização consiste na retirada destes da chaminé dos fornos, os quais passam por tubulações até atingirem o queimador. Para evitar a condensação dos gases e geraçã
Rev. Árvore. Publicado em: 11/02/2019
-
6. Trajectory Optimization of Launch Vehicles Using Object-oriented Programming
ABSTRACT: The aim of this study is to model launch vehicles with focus on 3-DOF trajectory optimization using a modular approach. Despite the large number of operational launch vehicles, they usually consist of basic components and subsystems. In other words, a launch vehicle is an assembly of stages, which in turn is divided into propellant system and engin
J. Aerosp. Technol. Manag.. Publicado em: 13/09/2018
-
7. INFLUÊNCIA DO ENVELHECIMENTO ACELERADO EM FLARES MAGNÉSIO/PTFE/FPM
Magnesium/PTFE/FPM decoy flares, also named conventional flares, were designed in order to protect combat aircraft from the threat caused by infrared-guided missiles. Adverse storage or transport conditions may cause reactions that deteriorates chemical properties of the conventional flares, causing the aging and compromising its performance. The aim of this
Quím. Nova. Publicado em: 2017-09
-
8. Thick CrN/NbN Multilayer Coating Deposited by Cathodic Arc Technique
The production of tribological nanoscale multilayer CrN/NbN coatings up to 6 µm thick by Sputtering/HIPIMS has been reported in literature. However, high demanding applications, such as internal combustion engine parts, need thicker coatings (>30 µm). The production of such parts by sputtering would be economically restrictive due to low deposition rates.
Mat. Res.. Publicado em: 19/12/2016
-
9. Experimentally Validated Combustion and Piston Fatigue Life Evaluation Procedures for the Bi-Fuel Engines, Using an Integral-Type Fatigue Criterion
Abstract A relatively complete procedure for high cycle fatigue life assessment of the engine components is outlined in the present paper. The piston is examined as a typical component of the engine. In this regard, combustion process and transient heat transfer simulations, determination of the instantaneous variations of the pressure and temperature in the
Lat. Am. j. solids struct.. Publicado em: 2016-06
-
10. One-Stage Power Turbine Preliminary Design and Analysis
ABSTRACT: Design and development of gas turbine components are a complex multidisciplinary process. At the beginning of the power class definition and engine configuration it is necessary to conduct a market study. The results obtained are used in gas turbine thermodynamic cycle calculations and analysis in order to define the gas turbine design point. Sever
J. Aerosp. Technol. Manag.. Publicado em: 2015-06
-
11. The Mutagenic Potential Caused by the Emissions from Combustion of Crude Glycerin and Diesel Fuel
This study evaluated the use of crude glycerin as an alternative of energy generation to replace the traditional fuels. The Tradescantia stamen hair mutation assay (Trad-SH) was applied to study the mutagenic effects caused by the emissions generated in the direct combustion of diesel oil and glycerin in a flame tube furnace. Tradescantia inflorescences were
Braz. arch. biol. technol.. Publicado em: 11/11/2014
-
12. Combustion Modeling of Aluminum Incorporated in Low-Explosive Formulations such as Solid Propellants
ABSTRACT: Aluminum that is incorporated in an energetic material such as a propellant plays a significant role in the combustion process by means of stabilization with regard to the burning and generation of additional energy. The use of simulation softwares to model the combustion mechanism and kinetic parameters of the elementary reactions that compose the
J. Aerosp. Technol. Manag.. Publicado em: 2013-09