Composite Beams Of Steel And Concrete
Mostrando 1-12 de 36 artigos, teses e dissertações.
-
1. Numerical formulation for nonlinear analysis of concrete and steel shells with deformable connections
Abstract A two-dimensional interface finite element capable of associating flat shell elements positioned one above the other was developed. The implemented interface element can physically simulate the contact between the flat shell elements and connect the reference planes of the shell elements above and below it. The formulation presented allows considera
REM, Int. Eng. J.. Publicado em: 2021-09
-
2. Numerical analysis of collapse modes in optimized design of alveolar Steel-concrete composite beams via genetic algorithms
Abstract The objective of this study is to present the formulation and applications of the optimization problem of steel-concrete composite alveolar beams. In addition to presenting the formulation, a comparative analysis of the predominant collapse modes is performed numerically via the finite element method. The optimization program was developed with the
REM, Int. Eng. J.. Publicado em: 2021-06
-
3. Composite floor system with CFS trussed beams, concrete slab and innovative shear connectors
Abstract Steel and concrete floor systems are widely applied for buildings and provide excellent structural response, optimized material consumption, reduced beam height, and improved bending strength and stiffness capacity. In recent years, many experimental investigations concerned with new alternatives addressed to efficient interaction between steel and
REM, Int. Eng. J.. Publicado em: 2020-03
-
4. Optimized dimensioning of steel-concrete composite beams
Resumo As seções mistas de aço e concreto estão cada vez mais sendo utilizadas na construção civil, tanto no cenário mundial quanto no Brasil. O trabalho conjunto do perfil de aço e da laje de concreto aumenta consideravelmente o desempenho do elemento estrutural misto devido ao aproveitamento das vantagens de cada material. Neste trabalho, é utiliz
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
5. About the use of semi-continuity in simply supported composite steel and concrete beams, to remove fireproof coatings for standard-fire resistance requirement of less than 30 minutes
Resumo Estudos anteriores do comportamento sob ação do incêndio de vigas mistas de aço e concreto, sem instabilidades locais (ditas compactas), considerando a rigidez à flexão nos apoios fornecida pela armadura negativa longitudinal à viga (semicontinuidade), mostraram que não é possível justificar a ausência de revestimento contra fogo para tempo
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
6. Experimental evaluation on the structural behavior of truss shear connectors in composite steel-concrete beams
Resumo As estruturas mistas apresentam grandes vantagens quanto a aspectos estruturais e construtivos, sendo os conectores de cisalhamento determinantes para a obtenção da interação entre os elementos estruturais e para a distribuição dos esforços na estrutura, aproveitando-se de forma efetiva da potencialidade de cada material constituinte da estrutu
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
7. Some Aspects of Numerical Modeling of Steel-Concrete Composite Beams with Prestressed Tendons
Abstract Aspects about the numerical modeling of three-dimensional prestressed steel-concrete composite beams by using the finite element (FE) method are highlighted and commented in this work. Emphasis is given to the numerical treatment of bonded and unbonded tendons. The proposed modeling technique uses curved beam and catenary elements for simulating int
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
8. Plate with holes as shear connector in cold formed steel composite beams
Resumo Buscando compatibilizar as estruturas em perfil formado a frio com os sistemas de piso com pré-laje, foi proposta nesse trabalho uma alternativa de conector de cisalhamento para vigas mistas compostas por perfil formado a frio que visa maximizar a área disponível para apoio das pré-lajes durante o processo construtivo. Trata-se de um conector em c
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
9. Structural Behaviour of Cold-Formed Steel of Double C-Lipped Channel Sections Integrated with Concrete Slabs as Composite Beams
Abstract Cold-formed steel (CFS) construction is widely recognised as an important contributor to sustainability and green construction. Thus, the use of CFS construction is encouraged and had been advanced by innovations in its structural applications. One such innovation that has recently gained popularity is the use of CFS sections in composite constructi
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
10. Non-Linear Three Dimensional Finite Elements for Composite Concrete Structures
Abstract The current investigation focused on the development of effective and suitable modelling of reinforced concrete component with and without strengthening. The modelling includes physical and constitutive models. New interface elements have been developed, while modified constitutive law have been applied and new computational algorithm is utilised. T
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
11. Parametric Modal Dynamic Analysis of Steel-Concrete Composite Beams with Deformable Shear Connection
Abstract Composite structural elements of steel-concrete began to be used only in 1960 after the development of methods and constructive dispositions that ensured the functionality of these two materials together. In order to verify the importance of the participation of the axial mode in the frequency spectrum of the free vibration problem in composite beam
Lat. Am. j. solids struct.. Publicado em: 2017-02
-
12. Modelos numéricos de vigas mistas de aço e concreto pertencentes a sistemas de pisos mistos de pequena altura em situação de incêndio / Numerical modelling of composite slim floor beams in fire
Slim floor frames consists on structural system in which the steel beam is completely or partially inserted in a concrete slab, that is usually used in profiled steel decks systems. The main goal of the slim floor systems is to obtain a minimum height of the composite beam section and, consequently, achieve a higher height of the floor or a lower total heigh
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/03/2012