Concrete Data Structures
Mostrando 1-12 de 31 artigos, teses e dissertações.
-
1. Avaliação teórico-experimental da resistência à compressão de concretos através de ensaios não destrutivos
RESUMO Na avaliação de estruturas degradadas é comum a necessidade de se determinarem propriedades mecânicas de estruturas de concreto sem dispor dos dados de projeto. Propriedades como resistência à compressão e módulo de elasticidade, por exemplo, são importantes nessa análise. No entanto, a extração de testemunhos para avaliação laboratorial
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Desenvolvimento de sistema de baixo custo para monitoramento de integridade estrutural
RESUMO O Monitoramento da Integridade Estrutural (MIE) pode ser utilizado para avaliar as condições de integridade de uma estrutura, ou ainda para verificar modelos de comportamento da mesma. Os atuais sistemas de monitoramento aplicados em grandes estruturas, contam com inúmeros sensores, dos mais variados tipos, que formam redes de comunicação, em alg
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Revisão sobre ensaios acelerados para indução da corrosão desencadeada por cloretos em concreto armado
Resumo A corrosão de armaduras desencadeada por cloretos é um dos principais problemas que afetam as estruturas de concreto armado. Considerando o estudo desse tipo de problema, a velocidade na coleta dos dados, a possibilidade de controle das variáveis que influenciam o processo de corrosão e o baixo custo na realização dos testes têm sido aspectos m
Ambient. constr.. Publicado em: 03/10/2019
-
4. Application of Support Vector Machine and Finite Element Method to predict the mechanical properties of concrete
Abstract Compressive strength and Young’s modulus are the main properties used in the design of concrete structures. They are responsible for the cost, safety and dimensioning of the structure, and are generally measured in expensive and time-demanding tests. This fact encourages researches for fast and cost-effective methods to investigate the concrete’
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
5. Evaluation of low-cost MEMS accelerometers for SHM: frequency and damping identification of civil structures
Abstract Sensing techniques based on accelerometers for modal parameters identification are among the most studied and applied in Structural Health Monitoring of civil structures. The advent of low-cost MEMS accelerometers and open-source electronic platforms, such as Arduino, have facilitated the design of low-cost systems suitable for modal identification,
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
6. Influence of different compacting methods on concrete compressive strength
ABSTRACT Adequate compacting is an important stage contributing for the durability and final quality of concrete structures. The two main ways of compacting concrete are: manual and mechanical (immersion vibrator). This paper has the goal of verifying the influence of those two compacting methods on the compressive strength of concrete from long term data. I
Matéria (Rio J.). Publicado em: 18/10/2018
-
7. Numerical analysis of RC plane structures: a concentrated nonlinear effect approach
Abstract The present work aims to study the nonlinear behavior of reinforced concrete structures via Refined Plastic Hinge Method (RPHM). Pseudo-springs are used at the finite element ends, where the gradual loss of stiffness is determined by the combination of the normal force and bending moment (NM) in the cross section. The limiting of the uncracked, ela
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
8. Modeling of Combined Impact and Blast Loading on Reinforced Concrete Slabs
Abstract Explosive devices represent a significant threat to military and civilian structures. Specific design procedures have to be followed to account for this and ensure buildings will have the capacity to resist the imposed pressures. Shrapnel can also be produced during explosions and the resulting impacts can weaken the structure, reducing its capacity
Lat. Am. j. solids struct.. Publicado em: 2016-12
-
9. Explicit expression for effective moment of inertia of RC beams
AbstractDeflection is an important design parameter for structures subjected to service load. This paper provides an explicit expression for effective moment of inertia considering cracking, for uniformly distributed loaded reinforced concrete (RC) beams. The proposed explicit expression can be used for rapid prediction of short-term deflection at service lo
Lat. Am. j. solids struct.. Publicado em: 2015-03
-
10. Strut and tie modeling for RC short beams with corroded stirrups
Corrosion of steel reinforcement is one of the major problems that shorten the service life of reinforced concrete (RC) structures. Steel stirrups, due to their location as an outer reinforcement, are more susceptible to corrosion problems and damage. However, there is limited research work in the literature on the effects of stirrup corrosion on the shear s
Lat. Am. j. solids struct.. Publicado em: 2014
-
11. Avaliação estatística do erro de modelos de resistência para elementos lineares de concreto armado da ABNT NBR 6118:2007 / Statistical evaluation of resistance modelling error for linear elements of concrete structures of ABNT NBR 6118:2007
In a design of structures, it should be considered the intrinsic uncertainties to the present variables in the structure and in the structural concept, such as intensity and action distribution, mechanic properties of the material, geometric parameters of the structure and structural analysis and calculus models. Thus, the structural safety can only be measu
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/08/2012
-
12. Estudos das características técnicas e operacionais das galerias de águas pluviais como subsídios para gestão patrimonial e estabelecimento de diretrizes para projetos de sistemas de drenagem urbana
The purpose of this work is to study the emergence and evolution of pathological manifestations in urban stormwater channels and relate them to technical and operational characteristics of concrete structures so that plans for urban drainage systems management are developed, as well as new concepts for stormwater channel projects. The main reference is the D
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/04/2012