Connectors
Mostrando 1-12 de 94 artigos, teses e dissertações.
-
1. Composite floor system with CFS trussed beams, concrete slab and innovative shear connectors
Abstract Steel and concrete floor systems are widely applied for buildings and provide excellent structural response, optimized material consumption, reduced beam height, and improved bending strength and stiffness capacity. In recent years, many experimental investigations concerned with new alternatives addressed to efficient interaction between steel and
REM, Int. Eng. J.. Publicado em: 2020-03
-
2. INNOVATION SYSTEM IN AIR TRANSPORT MANAGEMENT
Abstract Identifying previous research subjects on innovation management in air transport provides not only updated references on new technologies in this industry, but also indicates which areas need to be prioritized in future research. A systematic literature review of publications in this field over the past decade, from 2005 to 2015, including 2016 publ
JISTEM J.Inf.Syst. Technol. Manag.. Publicado em: 02/12/2019
-
3. Experimental evaluation on the structural behavior of truss shear connectors in composite steel-concrete beams
Resumo As estruturas mistas apresentam grandes vantagens quanto a aspectos estruturais e construtivos, sendo os conectores de cisalhamento determinantes para a obtenção da interação entre os elementos estruturais e para a distribuição dos esforços na estrutura, aproveitando-se de forma efetiva da potencialidade de cada material constituinte da estrutu
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
4. Análisis de textos argumentativos elaborados por estudiantes chilenos de pedagogía
Abstract Within the framework of academic discourse, this research contributes to the study of argumentation as a discursive genre and a modality of thought widely used in the discursive practices of higher education students. The aim of the study is to analyse the pragmatic-dialogical and discursive-textual dimensions of argumentative writings produced by C
Educ. Pesqui.. Publicado em: 23/09/2019
-
5. STRESS, DISPLACEMENT JOINTS OF GMELINA ARBOREA AND TECTONA GRANDIS WOOD WITH METAL PLATES, SCREWS AND NAILS FOR USE IN TIMBER TRUSS CONNECTIONS
ABSTRACT In countries like Costa Rica, there is an interest in developing wooden trusses in a versatile and light way. However, there is a key aspect in the behavior of truss connections in this product. Therefore, the present study determines the structural behavior of the truss connections and the displacement, the resistance, the stiffness values and the
CERNE. Publicado em: 09/09/2019
-
6. Some Aspects of Numerical Modeling of Steel-Concrete Composite Beams with Prestressed Tendons
Abstract Aspects about the numerical modeling of three-dimensional prestressed steel-concrete composite beams by using the finite element (FE) method are highlighted and commented in this work. Emphasis is given to the numerical treatment of bonded and unbonded tendons. The proposed modeling technique uses curved beam and catenary elements for simulating int
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
7. Bundle para manuseio do cateter central de inserção periférica em neonatos
Resumo Objetivo Construir um bundle para prevenção de infecção primária da corrente sanguínea relacionada a cateter que contemple cuidados de enfermagem para manuseio do cateter de acesso venoso central por inserção periférica em neonatos. Métodos Pesquisa metodológica, desenvolvida no ano de 2017 em três etapas: levantamento bibliográfico, co
Acta paul. enferm.. Publicado em: 29/07/2019
-
8. Slabs strengthened for punching shear with post-installed steel and CFRP connectors
Resumo Acidentes estruturais por punção vêm sendo relatados em edifícios com lajes lisas. As recomendações de projeto apresentadas pelas normas podem levar a estimativas de resistência à punção divergentes para situações semelhantes. Além disso, não são apresentadas orientações para o dimensionamento do reforço à punção de lajes existent
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
9. Plate with holes as shear connector in cold formed steel composite beams
Resumo Buscando compatibilizar as estruturas em perfil formado a frio com os sistemas de piso com pré-laje, foi proposta nesse trabalho uma alternativa de conector de cisalhamento para vigas mistas compostas por perfil formado a frio que visa maximizar a área disponível para apoio das pré-lajes durante o processo construtivo. Trata-se de um conector em c
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
10. Fatores de contextualização em textos redigidos por um estudante surdo
Resumo O trabalho tem como objetivo analisar o percurso de aprendizagem de escrita de um aluno surdo a partir de atividades realizadas em uma oficina de redação em Língua Portuguesa, ministrada por um professor ouvinte. Questões: 1) Como um estudante surdo administra, em seus escritos, os fatores de contextualização, elementos que ancoram o texto em um
Pro-Posições. Publicado em: 04/07/2019
-
11. Structural Behaviour of Cold-Formed Steel of Double C-Lipped Channel Sections Integrated with Concrete Slabs as Composite Beams
Abstract Cold-formed steel (CFS) construction is widely recognised as an important contributor to sustainability and green construction. Thus, the use of CFS construction is encouraged and had been advanced by innovations in its structural applications. One such innovation that has recently gained popularity is the use of CFS sections in composite constructi
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
12. Experimental analysis of bolts employed as shear connectors in circular concrete-filled tube columns
Resumo Este estudo apresenta análises experimentais e teóricas do uso de parafusos como conectores de cisalhamento em pilares mistos de aço em seção tubular circular preenchidos com concreto (PMPCs). Os resultados obtidos experimentalmente são comparados com os resultados das formulações propostas pela norma ABNT NBR 16239:2013. Os ensaios são de ci
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019