Copper Analysis
Mostrando 1-12 de 479 artigos, teses e dissertações.
-
1. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Optimization Techniques and Mathematical Modeling Applied to Reluctance Motors
Abstract The present work aims at the application of different optimization strategies in the electromagnetic analysis of the Variable Reluctance Motor (VRM) through Finite Element (FE) simulation. Two case studies are investigated: the first one aims to optimize the geometry and electrical characteristics of windings of a single-phase VRM 6/6, minimizing co
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Drug-induced Sleep Endoscopy: Are there Predictors for Failure of Oral Appliance Treatment?
Abstract Introduction In the literature, evidence is lacking on the predictive value of druginduced sleep endoscopy (DISE) for oral appliance treatment (OAT). Objectives The aim of the present study is to evaluate whether DISE with concomitant mandibular advancement maneuver can predict failure of OAT. Methods An observational retrospective study includin
International Archives of Otorhinolaryngology. Publicado em: 2022
-
4. Immediate Postpartum Copper IUD: A Comparative Analysis between Profiles of Women who Accept and who Refuse it
Resumo Objetivo Analisar o perfil das mulheres que aceitaram e recusaram a inserção do dispositivo intrauterino (DIU) de cobre no pós-parto imediato e conhecer as motivações relacionadas à recusa ao método. Métodos Estudo transversal com 299 gestantes, as quais foram informadas sobre a possibilidade de inserir o DIU de cobre imediatamente após o
Revista Brasileira de Ginecologia e Obstetrícia. Publicado em: 2022
-
5. Geophysical and structural survey in copper occurrence located in the northern region of the Camaquã basin (RS)
Abstract The geophysical diagnosis of mineral deposits can be extremely useful in detailing mineralized zones and is a strategy for direct sampling by probing holes for content analysis. This study involves the combined use of Electrical geophysical methods (DC resistivity and Induced Polarization), geological recognition and structural field analysis, with
REM, Int. Eng. J.. Publicado em: 2021-06
-
6. Electroanalytical Method for Determination of Trace Metals in Struvite Using Electrochemically Treated Screen-Printed Gold Electrodes
We present an electroanalytical method using square-wave anodic stripping voltammetry on electrochemically-treated screen-printed gold electrodes to the simultaneous determination of lead(II), copper(II) and mercury(II) in struvite (natural fertilizer produced from urine). Electrochemical treatment via cyclic voltammetry of the working electrodes increased s
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
7. Influence of treatment with water-soluble CCB preservative on the physical-mechanical properties of brazilian tropical timber
This aim of this work is to present an analysis of the influence of impregnation against biological demand, realized with saline solution of CCB (Chromated Copper Borate preservative) by vacuum-pressure process, on physical-mechanical properties of tropical wood species Simarouba sp., Cedrelinga catenaeformis and Erisma uncinatum Warm. In theory, such proces
Mat. Res.. Publicado em: 13/01/2020
-
8. Glass Formation of Null-Matrix Cu-Hf-(Zr, Ti) Alloys
An approach following the null-matrix, Ti/Zr ratio of 2.08, for neutron diffraction was used to calculate the glass formation in Cu-Ti-(Hf,Zr) alloys. The Cu55Zr14.6Ti30.4, Cu61.48Hf18.52Zr6.48Ti13.52, Cu58.1Hf16.9Zr8.1Ti16.9 and Cu52.46Hf14.2Zr10.8Ti22.54 compositions (at. %), were calculated and prepared by argon arc melting. Copper die suction casting was
Mat. Res.. Publicado em: 13/01/2020
-
9. Monitoring the content of ethyl carbamate and copper in organic and conventional cachaça
ABSTRACT: Ethyl carbamate (EC) (NH2COOCH2CH3) is found in cachaça, and its presence in the beverage is conspicuous for its toxicity. Copper, the metal of choice used in the construction of stills, is also considered a beverage contaminant and is often related to the presence of EC in beverages. The study aimed to monitor the quality of cachaça by measuring
Sci. agric. (Piracicaba, Braz.). Publicado em: 20/12/2019
-
10. Growth and nutrients content of heliconia under mineral fertilization
Resumo Heliconias têm grande importância comercial devido à durabilidade de suas inflorescências, tamanhos, formas e cores brilhantes. Em relação à sua produção, a nutrição mineral da cultura é um dos aspectos mais relevantes para a obtenção de hastes florais de qualidade. O objetivo foi determinar a influência do N-P-K no crescimento e estado
Ornam. Hortic.. Publicado em: 28/10/2019
-
11. Caracterização do composto de CuCr2O4 obtido pelo método da reação de combustão em solução
RESUMO O material CuCr2O4 foi sintetizado pela reação de combustão em solução e tratado termicamente na faixa de 600 à 1100oC, afim de verificar a evolução das fases. O composto foi carcterizado estrutural e morfologicamente por meio das técnicas de Difração de Raios X (DRX), refinamentos pelo método de Rietveld, Microscopia Eletrônica de Varred
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Produção e caracterização de revestimentos de ligas metálicas Cu-Sn em banho eletrolítico contendo glicina: ensaios preliminares
RESUMO Os problemas relacionados à corrosão são frequentes, podendo ocorrer nas mais variadas áreas, tais como, nas indústrias química, petroquímica, naval, de construção civil e automobilística, dentre outros setores produtivos. Portanto, métodos para prevenir a corrosão devem ser empregados para evitar a perda de materiais e o uso de revestimen
Matéria (Rio J.). Publicado em: 16/09/2019