Corrosion Protection
Mostrando 1-12 de 88 artigos, teses e dissertações.
-
1. PROPRIEDADES DE PROTEÇÃO TÉRMICA DO CARBETO DE SILÍCIO EM REVESTIMENTOS CERÂMICOS
In recent years, research on the development of protective materials has expanded significantly in order to find efficient and economically viable solutions for application in various industrial segments. Among these materials, those aimed at protecting metallic substrates against high temperatures that end up causing corrosive processes, stand out due to th
Quím. Nova. Publicado em: 2021-01
-
2. Corrosion Protection of Steel by Volatile Corrosion Inhibitors: Vapor Analysis by Gas-Diffusion Microextraction and Mass Loss and Electrochemical Impedance in NaCl Deliquescence Tests
A new methodology using gas-diffusion microextraction (GDME) was developed for the analysis of volatile corrosion inhibitors (VCIs). The evaluation of the inhibition efficiency and corrosion rate (ν) was performed by NaCl deliquescence tests and correlated with measurements of polarization resistance (Rp) obtained from electrochemical impedance spectroscopy
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
3. Evaluation of Aqueous Coffee Husks Extracts as a Corrosion Inhibitor of 1020 Carbon Steel in 1 mol L-1 HCl Solution
Corrosive processes in acidic medium reduce the performance and durability of metallic materials, causing problems to several industries. Corrosion inhibitors are commonly used to decrease these effects. As these inhibitors must be ecologically friendly currently, this work evaluated the anticorrosive effect of natural extracts of coffee husks (Coffea arabic
Mat. Res.. Publicado em: 09/12/2019
-
4. Effect of High-pressure Torsion on Corrosion Behavior of a Solution-treated Al-Mg-Sc Alloy in a Saline Solution
The effect of the increase in crystalline defects in the structure generated by high-pressure torsion (HPT) on the corrosion behavior of metallic materials is not well understood. This report evaluates the influence of HPT on the corrosion behavior of a solution treated Al-3wt% Mg-0.2wt% Sc alloy in a 3.5 wt./v.% NaCl solution. The electrochemical behavior o
Mat. Res.. Publicado em: 04/11/2019
-
5. Scanning Electrochemical Microscopy (SECM) Study of the Electrochemical Behavior of Anodized AZ31B Magnesium Alloy in Simulated Body Fluid
In this work, scanning electrochemical microscopy (SECM) was employed to study the corrosion behavior of anodized AZ31B magnesium alloy exposed to simulated body fluid. SECM measurements were carried out in surface generation/tip collection mode. The hydrogen evolution flux caused during corrosion of the magnesium alloy was oxidized at the ultra-microelectro
Mat. Res.. Publicado em: 28/10/2019
-
6. Study of behavior alloy Ti and 316L in to simulated body fluid by electrochemical techniques
ABSTRACT In this work, Ti-316L stainless steel was produced, and its electrochemical behavior was characterized. Ti-steel alloys were produced using an induction furnace, by mixing commercial Ti and 316L stainless steel. X-ray diffraction analyses showed the presence of both the materials, Ti and 316L, in the samples produced. The elemental composition of th
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Avaliação da resistência à corrosão do filme de silanoviniltrimetoxisilano modificado com íons Ce (III) e Ce (IV) como pré-tratamento do aço carbono
RESUMO Silanos são compostos organo funcionais utilizados como agentes de acoplamentos entre interfaces orgânicoinorgânicas, com boas propriedades de adesão. Por esta razão, o uso de silanos como pré-tratamento para aços, vem ganhando espaço já que também são geradores de resíduos de menor toxidade ao meio ambiente e à saúde humana. Para melhor
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Polypyrrole Film Doped with Corrosion-Inhibitors Electropolymerized on AA 1100
Polypyrrole films doped with dodecylbenzenesulfonate (PPy/DBS) and with oxy-anions tungstate (PPy/DBS/TUN) and vanadate (PPy/DBS/VAN) were potentiostatically electropolymerized on aluminum alloy 1100 (AA1100). The corrosion protection of these films was evaluated by the variation of the corrosion potential (ECORR) with the immersion time and by electrochemic
Mat. Res.. Publicado em: 05/09/2019
-
9. Quality analysis of galvanized pipes applied to natural gas installations in civil construction
ABSTRACT Some natural gas distributors for residential and commercial buildings in Brazil use galvanized steel tubes and fittings manufactured by the hot-dip zinc process that are supported by the specifications contained in the Brazilian Standards. Zinc coating is one of the most widely used methods to provide protection against corrosion. It is therefore e
Matéria (Rio J.). Publicado em: 10/06/2019
-
10. Corrosion and Micro-abrasive Wear Behaviour of 2524-T3 Aluminium Alloy with PAni-NPs/PSS LbL Coating
In this paper, we present an alternative method to obtain thin films for coating protection on the surface of the AA2524-T3 Al-alloy by using the Layer-by-Layer (LbL) technique. The LbL films were fabricated by alternated immersion of the Al-alloy into a poly(styrene sulfonate) (PSS) and polyaniline nanoparticles (PAni-NPs) solutions, obtaining a PAni-NPs/PS
Mat. Res.. Publicado em: 06/06/2019
-
11. Study on influence of the PTA-P welding process parameters on corrosion behavior of Inconel 625 coatings
ABSTRACT In the present work, PTA welding process was used to investigate the influence of welding parameters on the dilution, microhardness and corrosion resistance of Inconel 625 alloy coatings on the API 5L X70 grade steel. The electrochemical impedance spectroscopy (EIS) and linear potentiodynamic polarization (LPP) measurements were used to study the pr
Matéria (Rio J.). Publicado em: 20/05/2019
-
12. Avaliação do chá branco como potencial inibidor de corrosão
RESUMO O trabalho apresenta avaliação do extrato alcoólico do chá branco como potencial inibidor de corrosão para o aço carbono P110 na presença de ácido clorídrico 1 mol.L-1. Os inibidores de corrosão destacam-se na proteção de peças metálicas em ambientes ácidos, sendo que muitas das substâncias presentes na composição de inibidores comer
Matéria (Rio J.). Publicado em: 20/05/2019