Corrosion Resistance
Mostrando 1-12 de 425 artigos, teses e dissertações.
-
1. Development of a ceramic membrane for emulsion water-diesel treatment
Abstract The purpose of this study was the development of a low-cost ceramic tubular membrane, using inexpensive materials, namely natural clay, and graphite as a porogenic agent. Such a low-cost membrane can be used as filters or porous supports for the preparation of multilayer ceramic membranes. Extrusion was used as a shape-forming method for this purpos
Cerâmica. Publicado em: 2022
-
2. Aqueous Extract of Cumaru (Dipteryx odorata) Seeds as Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Solution
The corrosion inhibition of mild steel by aqueous extract of cumaru (Dipteryx odorata) seeds and its high molecular weight fraction (HMWF) was investigated in 1 mol L-1 HCl solution. The study was carried out through gravimetric essays, open circuit potential measurements, anodic and cathodic polarization curves and electrochemical impedance analyses, as wel
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
3. Corrosion Protection of Steel by Volatile Corrosion Inhibitors: Vapor Analysis by Gas-Diffusion Microextraction and Mass Loss and Electrochemical Impedance in NaCl Deliquescence Tests
A new methodology using gas-diffusion microextraction (GDME) was developed for the analysis of volatile corrosion inhibitors (VCIs). The evaluation of the inhibition efficiency and corrosion rate (ν) was performed by NaCl deliquescence tests and correlated with measurements of polarization resistance (Rp) obtained from electrochemical impedance spectroscopy
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
4. Changes within the care of hematopoietic cell transplantation patients after the shift of a Mexican institution to a COVID-19-only center
A new methodology using gas-diffusion microextraction (GDME) was developed for the analysis of volatile corrosion inhibitors (VCIs). The evaluation of the inhibition efficiency and corrosion rate (ν) was performed by NaCl deliquescence tests and correlated with measurements of polarization resistance (Rp) obtained from electrochemical impedance spectroscopy
Hematol., Transfus. Cell Ther.. Publicado em: 2020-10
-
5. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
6. Effect of Etching Temperature on Surface Properties of Ti6Al4V Alloy for Use in Biomedical Applications
The objective of this study is to evaluate the surface physicochemical properties of Ti6Al4V alloy after etching with a piranha’s solution at temperatures of 25 °C, 40 °C, and 60 °C for 30 min. Scanning electron microscopy with energy-dispersive X-ray spectroscopy, optical profilometry, X-ray diffraction, and wettability analyses were used to characteri
Mat. Res.. Publicado em: 10/01/2020
-
7. Characterization and Comparative Analysis of Corrosion Resistance of 4 High Manganese Steels Models in Aqueous Solution of NaCl
The liquefied natural gas volumes that currently need to be stored and/or transported require engineering to consistently develop materials that combine high mechanical strength and low manufacturing costs. The present work brings the study of four models of high manganese steels (non-commercials), to demonstrate the feasibility of being used in the petroche
Mat. Res.. Publicado em: 09/12/2019
-
8. Investigation of Physicochemical Characteristics of Heavy, Medium and Blend Crude Petroleum on Corrosion Resistance of AISI 1020 Carbon Steel
This work investigates the influence of the physicochemical characteristics of heavy (17.5 °API), medium (28.3 °API) and blend (50% heavy + 50% medium) crude petroleum on corrosion of AISI 1020 carbon steel at 25.0 ± 1.0°C. The corrosion resistance of steel was analyzed by electrochemical impedance spectroscopy, potentiodynamic polarization, and scanning
Mat. Res.. Publicado em: 05/12/2019
-
9. Corrosion Resistance of TiO2-ZrO2 Nanocomposite Thin Films Spin Coated on AISI 304 Stainless Steel in 3.5 wt. % NaCl Solution
Utilizing high chromium and nickel content in AISI 304 steel confers its good corrosion resistance. However, the high content of chromium and nickel increases the steel susceptibility to corrosion caused by the high concentration of chlorine. Consequently, the electrochemical and mechanical performance of the steel degrades. In this study, the effect of addi
Mat. Res.. Publicado em: 02/12/2019
-
10. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019
-
11. Corrosion Resistance of Cu-Alloyed Precipitation Hardenable Duplex Stainless Steel ASTM A890 Grade 1B
Duplex stainless steels (DSS) are corrosion resistant alloys largely used in chemical and petrochemical industries. Some commercial DSS contain 0.5-1.0% copper addition to improve the corrosion resistance by reducing the corrosion rate in non-oxidizing environments. Higher copper addition (≥ 2%) can also hard by precipitation, especially when fine copper p
Mat. Res.. Publicado em: 07/11/2019
-
12. Effect of High-pressure Torsion on Corrosion Behavior of a Solution-treated Al-Mg-Sc Alloy in a Saline Solution
The effect of the increase in crystalline defects in the structure generated by high-pressure torsion (HPT) on the corrosion behavior of metallic materials is not well understood. This report evaluates the influence of HPT on the corrosion behavior of a solution treated Al-3wt% Mg-0.2wt% Sc alloy in a 3.5 wt./v.% NaCl solution. The electrochemical behavior o
Mat. Res.. Publicado em: 04/11/2019