Creep Mechanisms
Mostrando 1-12 de 16 artigos, teses e dissertações.
-
1. Flexure Based Energy Dissipating Device in Self-Centering Braces
Abstract Self-centering braces, in the current stage of development can accommodate large deformation and force levels. However, there is still a need for improvement of the energy dissipation mechanisms commonly incorporated in these braces. Yield based energy dissipation systems can overcome some of the problems faced with friction-based devices, such as s
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
2. Creep Fracture Mechanisms and Maps in Aisi Type 316 Austenitic Stainless Steels from Distinct Origins
Two distinct AISI type 316 stainless steels, of Brazilian and Swedish origins, were compared regarding their creep fracture mechanisms at 600, 700 and 800°C. The possible mechanisms associated with the creep fracture strength were identified by means of fracture maps proposed either by Ashby and collaborators or by Miller and Langdon. Experimental creep res
Mat. Res.. Publicado em: 01/03/2018
-
3. Creep Parameters and Dislocation Substructure in AISI 316 Austenitic Stainless Steel From 600ºC to 800ºC
Stainless steels are well known by their corrosion resistance. The austenitic types, in particular, are also applied as structural components in engineering systems operating at high temperatures such as nuclear reactors, petrochemical furnaces and turbines. For these applications operational temperatures may go up to 800ºC. Under constant load applications
Mat. Res.. Publicado em: 06/07/2017
-
4. Evaluating the flow processes in ultrafine-grained materials at elevated temperatures
When polycrystalline materials are tested in tension at elevated temperatures, the flow mechanisms depend upon various parameters including the temperature of testing, the applied stress and the material grain size. The plotting of deformation mechanism maps is a procedure used widely in displaying and interpreting the creep properties of conventional coarse
Mat. Res.. Publicado em: 19/02/2013
-
5. Creep-age forming of AA7475 aluminum panels for aircraft lower wing skin application
Creep-age forming (CAF) is an interesting process for the airframe industry, as it is able to form or shape panels into smooth, but complex, curvatures. In the CAF process, the ageing cycle of the alloy is used to relax external loads imposed to the part, through creep mechanisms. Those relaxed stresses impose a new curvature to the part. At the end of the p
Materials Research. Publicado em: 17/07/2012
-
6. Contribution to the study of shrinkage and creep and their low ages performing mechanisms in structural concretes / Contribuição ao estudo da retração e da fluência e seus mecanismos de atuação a baixas idades em concretos estruturais
This work aimed to study the development of shrinkage and creep in commercial concretes with resistance varying about 20, 35 and 50 MPa. Determination tests of shrinkage and creep in sealed and not sealed specimens were carried out by applying a variation of parameters that influence the deformation development. From the results, the differentiation of speci
Publicado em: 2010
-
7. Estudo de mecanismos de deformação lenta da gipsita bandada da Chapada do Araripe em ensaios de fluência monitorados por emissão acústica / Study of slow deformation mechanisms of the banded gypsum rock of the Chapada do Araripe in creep tests monitored by acoustic emission
Experimental studies by several authors have shown some of the key deformation mechanisms in gypsum, such as plastic flow and pressure dissolution. Even so, there is still sparse knowledge about the mechanical behavior of natural gypsum rocks. Creep mechanisms of the banded gypsum rock of Santana Formation from the Chapada do Araripe (Santana Formation) in c
Publicado em: 2009
-
8. Schistosomal granuloma as a system adaptive complex. Application of fractal dimension in characterization of their geometric properties. / Granuloma esquistossomótico como um sistema adaptativo complexo. Aplicação da dimensão fractal na caracterização de suas propriedades geométricas.
Schistosomal granuloma AS A COMPLEX ADAPTIVE SYSTEM: APPLICATION OF FRACTAL DIMENSION IN THE CHARACTERIZATION OF PROPERTIES GEOMETRIC. Waldemiro de Souza Romagna. [Introduction]. The schistosomal granuloma is a compact, organized collection of migrating cells, which along with cells of the affected organ, arrange themselves in the midst of extracellular matr
Publicado em: 2007
-
9. A contribution of X ray diffraction analysis in the determination of creep of Si3N4 ceramics
The understanding of the creep behavior of silicon nitride (Si3N4) is extremely complex because of a large number of parameters influencing simultaneously the creep deformation of the materials. In general, the main creep mechanisms acting in these materials are grain boundary sliding or materials transport by solution-precipitation process. In this work, th
Materials Research. Publicado em: 2006-03
-
10. Development, microstructural and mechanical caracterization of SiC ceramics with alumina and rare earth oxides additions / Desenvolvimento, caracterização microestrutural e mecânica de cerâmicas de SiC aditivadas com alumina e óxidos de terras raras
In this work, the mechanical properties are determined at room temperature (hardness and fracture toughness) and high temperatures (compressive creep) of SiC ceramic samples with alumina (Al2O3) and rare earth oxides (REO) additions. The REO is obtained by REC (rare earth concentrate - Nuclemon) calcinations, which contains 76 wt % of yttria (Al2O3). Three c
Publicado em: 2006
-
11. RETRAÇÃO, FLUÊNCIA E FRATURA EM COMPÓSITOS CIMENTÍCIOS REFORÇADOS COM POLPA DE BAMBU / SHRINKAGE, CREEP AND FRACTURE OF CEMENTITIOUS COMPOSITES REINFORCED WITH BAMBOO PULP
The application of cimentitious composites using vegetal fibers in substitution of asbestos is a worldwide fact in the fiber cement industry. Despite their good mechanical properties and durability, the use of asbestos fibers causes well-known health hazards. Although vegetal fibers have relatively poor mechanical properties compared with synthetic fibers, t
Publicado em: 2006
-
12. Time-dependent behavior of sulphatic rocks of the anhydrite and gypsum / Comportamento dependente do tempo de rochas sulfáticas de anidrita e gipso
The purpose of this thesis is to contribute for the knowledge of time-dependent behavior of sulfatic rocks of anhydrite and gypsum. Emphasis is given to provide straightforward arguments about physical mechanisms responsible for creep observed in some underground excavations in those rocks in Europe. Explanation for this phenomena is not clear yet and studie
Publicado em: 2005