Cutting Tool
Mostrando 1-12 de 170 artigos, teses e dissertações.
-
1. Analysis of Al2O3-ZrO2 ceramic insert in turning process of Ti-6Al-4V alloy using grey Taguchi-based response surface methodology (GT-RSM)
Abstract The present investigation aimed at a sustainable green turning operation of Ti-6Al-4V alloy using multi-objective optimization of surface roughness, tool flank wear, material removal rate, and tool wear loss with cutting speed, feed rate, and depth of cut as input parameters. The experiments were performed on a CNC lathe machine using an alumina-zir
Cerâmica. Publicado em: 2022
-
2. Influência do material da ferramenta de corte sobre a usinabilidade do aço ABNT 4340 no torneamento
RESUMO No presente trabalho procurou-se compreender os fenômenos associados à usinagem do aço ABNT 4340 utilizando ferramentas de corte de metal duro e cermet, ambas com geometria do quebra-cavaco para usinagem leve (LP) e média (MP). Nesse sentido, analisou-se a influência da variação do avanço, quebracavaco e o material da ferramenta de corte nos p
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Productivity and Superficial Quality of an Aspherical Die Using CAD/CAM
ABSTRACT Nowadays, it is hard to imagine modern industry without the manufacturing and design software aided by computer, known as CAD/CAM, once the search for excellence in complex geometry parts, reduced time, quality assurance and interchangeability is increasing. Within this quest, the CAD/CAM platform has become a significant factor in manufacturing, es
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Tensile and fatigue properties, machinability and machined surface roughness of Al-Si-Cu alloys
ABSTRACT In this paper, the aim was to determine if ASC91 (9 % Al, 1 % Cu) could be replaced with ASC73 (7 % Al, 3 % Cu) aluminium alloy, with presumably improved machinability due to lower silicon content (9 to 7 %) and retained mechanical properties due to a higher copper content (1 to 3 %). The test samples were excised from cylinder heads produced by the
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Circular saw misuse is related to upper limb injuries: a cross-sectional study
OBJECTIVES: Machinery injuries account for a substantial share of traumatic upper limb injuries (TULIs) affecting young active individuals. This study is based on the hypothesis that there is an important relationship between the improper use of power saws and TULIs. The aim of the study is to assess the prevalence and epidemiology of TULIs caused by power
Clinics. Publicado em: 09/09/2019
-
6. Analysis and proposal of reduction of lead time in the process of cutting, loading and transportation in a sugar cane factory: a study case
Resumo A partir da importância do setor sucroenergético para a economia brasileira, e da importância do processo de corte/carregamento/transporte (CCT) de cana no suprimento e no custo da produção do açúcar, álcool e derivados, este artigo tem como estudo de caso uma usina de cana-de-açúcar paulista. O objetivo deste trabalho foi construir propost
Gest. Prod.. Publicado em: 05/09/2019
-
7. Influência do material da ferramenta de corte sobre a usinabilidade do aço ABNT 4340 no torneamento
RESUMO No presente trabalho procurou-se compreender os fenômenos associados à usinagem do aço ABNT 4340 utilizando ferramentas de corte de metal duro e cermet, ambas com geometria do quebra-cavaco para usinagem leve (LP) e média (MP). Nesse sentido, analisou-se a influência da variação do avanço, quebracavaco e o material da ferramenta de corte nos p
Matéria (Rio J.). Publicado em: 20/05/2019
-
8. Efeito da mesogeometria da broca e das condições de lubrirrefrigeração sobre o acabamento do furo em aço ARBL DIN S700MC
RESUMO O trabalho apresenta um estudo sobre os efeitos decorrentes da modificação da mesogeometria de uma broca helicoidal de metal-duro com revestimento de TiAlN sobre o acabamento superficial do aço de alta resistência e baixa liga DIN S700MC utilizando diferentes condições de aplicação de fluidos lubrirrefrigerantes (em abundância, em mínima qua
Matéria (Rio J.). Publicado em: 20/05/2019
-
9. An Investigation on Surface Roughness and Tool Wear in Turning Operation of Inconel 718
ABSTRACT: This paper investigates the influences of three different input parameters, such as feed rate, insert nose radius, and insert coating methods, in the turning operation of Inconel 718. The coating methods were selected as medium temperature chemical vapor deposition (MT-CVD) and physical vapor deposition (PVD) and in addition to coating methods, the
J. Aerosp. Technol. Manag.. Publicado em: 25/02/2019
-
10. Surface Integrity Analisys in the Hard Turning of Cemented Steel AISI 4317
This work was based on the surface integrity analysis of hardened steel, AISI 4317 case carburized, quenched and tempered with 58 HRC, obtained by a turning operation executed with CBN (cubic boron nitride) tool, varying three basic cutting parameters (cutting speed, feed rate and cutting depth). The surface integrity characterization was conducted analyzing
Mat. Res.. Publicado em: 26/07/2018
-
11. Evaluation of the oil flow using the MQL technique applied in the cylindrical plunge grinding of AISI 4340 steel with cbn grinding wheel
Abstract The grinding process is defined as an abrasive cutting action of a tool known as grinding wheel, which is submitted to high rotations, promoting excellent finishing and accuracy in dimensions, respecting the parameters established in each project. During the machining, the cutting edges of the abrasive grains undergo wearing and this increases the c
REM, Int. Eng. J.. Publicado em: 2018-07
-
12. On the Machinability and Surface Finish of Superalloy GH909 Under Dry Cutting Conditions
GH 909 alloy is a kind of low thermal expansion superalloy with high strength and low expansion coefficient. It is mainly used for manufacturing of aero-engine turbine casings, sealing ring, vanes and other gap control parts, to improve the working efficiency and thrust of the engine as well as to reduce gas loss and fuel consumption. However, the machinabil
Mat. Res.. Publicado em: 21/05/2018