Density Of Reinforcement
Mostrando 1-12 de 40 artigos, teses e dissertações.
-
1. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
2. Proposal of a new system to classify possible damages in piles partially reinforced considering the results of low strain integrity tests
Resumo Os ensaios PIT para avaliação de integridade em estacas têm um custo relativamente baixo, são de rápida execução e não destrutivos. Apesar dessas vantagens, as inúmeras variáveis envolvidas e a influência de fatores externos podem tornar a interpretação dos resultados complicada. Dentre elas, destacam-se as armaduras das estacas. Em estac
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
3. Mechanical Properties and Metallurgical Characterization of LM25/ZrO2 Composites Fabricated by Stir Casting Method
ABSTRACT Zirconia (ZrO2) dispersed aluminum alloy metal matrix composites produced by stir casting techniques. Using stir casting techniques, aluminium based composites with varying amounts of 3%, 6%, 9%, and 12% of zirconia by weight are fabricated. The prepared samples were subjected to physical, mechanical,tribiology and microstructure investigation. The
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Guaruman: a Natural Amazonian Fiber with Potential for Polymer Composite Reinforcement
The Amazonian region of South America is known for its diversified number of plants from which food, medicine, wood and fibers have, since long time, been produced by local natives. A typical example is the guarumã (“guaruman”as suggested English spelling) scientifically identified as Ischinosiphon koem, an abundant plant found in the low lands alongsid
Mat. Res.. Publicado em: 12/08/2019
-
5. Behavior of expanded polystyrene as lightweight filler in retaining walls with intermediate slabs
Abstract The present study explores a retaining wall with an intermediate slab. To reduce the lateral earth pressure on the wall, the substitution of part of the soil by blocks of expanded polystyrene (EPS) with high density is proposed, which could result in significant economic savings. Also, the possibility of building the wall elevation with smaller thic
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
6. Characterization of hibiscus sabdariffa fiber as potential reinforcement for denture acrylic resins
ABSTRACT This study aimed to determine the characteristics of Hibiscus sabdariffa as a fiber-reinforcement material for denture acrylic resins. The Hibiscus sabdariffa fiber was extracted by hot water retting. The fiber was treated at room temperature in aqueous solution of NaOH for 8 hours at 8% concentration. Micrometre gauge and Field emission scanning el
Matéria (Rio J.). Publicado em: 06/12/2018
-
7. Synthetic granite composite for precision equipment structures
ABSTRACT The structure is a component that plays an extremely important role in the equipment’s performance, it must withstand efforts without compromising the function, receive and transfer heat, dampen vibrations and position the elements, as well as promote ergonomics and aesthetics. In lightweight and precision equipment’s the raw material used must
Matéria (Rio J.). Publicado em: 06/12/2018
-
8. Weldability Study of LM25/ZrO2 Composites by Using Friction Welding
ABSTRACT In this paper aluminum (LM25) alloy was chosen as a base matrix metal, and it was reinforced with 0, 3, 6, 9, 12% of Zirconium dioxide (ZrO2) particulates based on weight fraction method. Stir casting method was used to cast LM25/ZrO2 composite material. The cast samples were subjected to physical and mechanical test viz, density, hardness, tensile,
Matéria (Rio J.). Publicado em: 10/08/2017
-
9. Study of Composites Produced with Recovered Polypropylene and Piassava Fiber
This work addresses the use of piassava fibers (PF) as reinforcement for recovered polypropylene (PPr) in the manufacturing of composites. The composites were molded with variable amounts of PF (10, 20 and 30 wt%), with and without maleic anhydride functionalized polypropylene (MAPP) (10 wt%) as compatibilizer. The composites were characterized using mechani
Mat. Res.. Publicado em: 08/12/2016
-
10. Utilization of banana stalk fiber as reinforcement in low density polyethylene composite
ABSTRACT Natural fibers could serve as viable and abundant alternatives to the expensive and non - renewable synthetic fibers as reinforcement in thermoplastic composites. The potentiality of banana stalk fiber at reinforcing a low density polyethylene matrix was examined in this study. Fibers were extracted from the stalk of banana plant and characterized f
Matéria (Rio J.). Publicado em: 2016-12
-
11. Effect of Heating Method on Microstructure and Mechanical Properties of Zircon Reinforced Aluminum Composites
The mechanical properties and microstructure of aluminum matrix composites containing of zircon (10, 15 and 20 wt.%) as a reinforcement particles and cobalt additive (1, 1.5 and 2 wt.%) were investigated. The aluminum matrix composites were prepared by powder metallurgy technique and sintered in both conventional and microwave furnaces at temperatures higher
Mat. Res.. Publicado em: 10/11/2016
-
12. Physicochemical, Mechanical and Morphologic Characterization of Purple Banana Fibers
Weather conditions and the Brazilian fertile soil contribute to abundant natural resources in a wide variety of fiber types. These fibers have attracted interest in Materials Science area for such characteristics as: low cost, high elasticity modulus and renewability. In this context, the objective of this work was physical, chemical and morphological charac
Mat. Res.. Publicado em: 04/12/2015