Deposition By Pld
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. Temperature Dependence of Electrical Resistance in Ge-Sb-Te Thin Films
Nowadays, the Ge-Sb-Te system is studied extensively for use in the field of both electrical and optical non-volatile memories. The key of this application is based on the changes in the physical properties (electrical conductivity or refractive index) of these films as a result of structural transformation between amorphous and crystalline states. Both stat
Mat. Res.. Publicado em: 18/02/2019
-
2. Structural and Optical Properties of GaN Thin Films Grown on Si (111) by Pulsed Laser Deposition
In this work we present results and analysis concerning the processing and characterization of Gallium Nitride (GaN) thin films (TF) grown on Si (111) substrates by pulsed laser deposition technique (PLD), which were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) and Raman spectroscopy (RS). The GaN films show
Mat. Res.. Publicado em: 14/01/2019
-
3. Yttria and ceria doped zirconia thin films grown by pulsed laser deposition
The Yttria stabilized Zirconia (YSZ) is a standard electrolyte for solid oxide fuel cells (SOFCs), which are potential candidates for next generation portable and mobile power sources. YSZ electrolyte thin films having a cubic single phase allow reducing the SOFC operating temperature without diminishing the electrochemical power density. Films of 8 mol% Ytt
Mat. Res.. Publicado em: 16/04/2013
-
4. Ca1-xSrxSnO3 (x = 0; 0,25; 0,50; 0,75 e 1): filmes obtidos por métodos físicos e químicos e pós obtidos pelo método dos precursores poliméricos / Ca1-xSrxSnO3: films obtained by PLD and CSD and powders by polymeric precursor method
SrSnO3 e CaSnO3 apresentam estrutura perovskita ortorrômbica, proveniente das distorção e inclinações de seus octaedros. Estas distorções favorecem a obtenção de materiais com propriedades dielétricas e semicondutoras, levando a inúmeras aplicações no setor tecnológico. Neste trabalho, pós de SrSnO3 foram obtidos pelo método dos precursores p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/05/2011
-
5. Pulsed laser deposition of SiO2 - P2O5 - CaO - MgO glass coatings on titanium substrates
Thin films of bioactive glass-ceramic have been deposited on titanium substrates by the Pulsed Laser Deposition (PLD) technique under different experimental conditions. The effect of parameters such as deposition pressure and temperature of heat treatments was studied. The microstructure and the crystalline phases of the coatings were characterized using SEM
Materials Research. Publicado em: 2004-09
-
6. Fabricação de multicamadas de Quantum Dots de PbTe por laser ablation
This thesis was dedicated to the fabrication of thin films, quantum dots and multilayer ofIV-VI semi conducting materiaIs by pulsed-Iaser deposition (PLD). In the first part we report on the construction of a "home made" facility for pulsed laser deposition. The basic experimental set-up fabricated for PLD consists of a vacuum chamber pumped to a base pressu
Publicado em: 2004
-
7. CaracterizaÃÃo de filmes de CdS preparados pela tÃcnica de deposiÃÃo por laser pulsado (PLD)
In this work, we have designed and installed a system for thin films deposition using a Nd:YAG laser as the source of energy for evaporation. The technique is known as: Pulsed Laser Deposition, PLD. The excitation wavelengths used were 1064 nm and 532 nm. The target was a pressed powder tablet of CdS. Characterization of the films was performed using X-rays
Publicado em: 2002
-
8. The temperature dependence of critical current in YBa2Cu3O7-d thin films deposited on MgO by an eclipse PLD
YBa2Cu3O7-d thin films were deposited on MgO single crystals by means of an eclipse pulsed laser deposition (PLD) method. A deposited lm exhibited the critical temperature of 74 K. The dependence of critical current on temperature was well explained by the Ginzburg-Landau theory. Although the theory is described only near critical temperature, experimental r
Braz. J. Phys.. Publicado em: 2001-09