Diesel Fuel
Mostrando 1-12 de 198 artigos, teses e dissertações.
-
1. K2O SUPORTADO EM ZEÓLITA NATURAL: SÍNTESE, CARACTERIZAÇÃO E APLICAÇÃO PRODUÇÃO DE BIODIESEL A PARTIR DO ÓLEO DE GIRASSOL
Biodiesel is a renewable fuel, a substitute for fossil diesel, which is important for reducing GHG in Brazil. Therefore, this work aims to synthesize and characterize the catalyst using the support of natural zeolite impregnated with K2O and apply it in the production of biodiesel through the transesterification reaction. Through the analysis of characteriza
Química Nova. Publicado em: 2022
-
2. REGRESSÃO MULTIVARIADA POR OPLS E PLS DOS ESPECTROS DE RMN DE 1H DE MISTURAS DIESEL/BIODIESEL DE MAFURRA PARA ESTIMATIVA DO TEOR DE BIODIESEL
Two methodologies were developed to monitor the biodiesel content of mafurra in mixtures with diesel using hydrogen nuclear magnetic resonance (1H NMR) Spectroscopy combined with the multivariate regression by orthogonal projections to latent structure (OPLS) and partial least squares (PLS). The efficiency of these methodologies was analyzed based on the fig
Quím. Nova. Publicado em: 20/07/2020
-
3. Increased power efficiency in mining by using high-fidelity haul truck simulation
Abstract The current economic and political scenario in Brazil has allowed small, medium and large companies to adopt cost cutdown and productivity increase strategies. Diesel fuel consumption by off-highway haul trucks stands for one of the largest costs at the Sossego Mine operational management department. Based on this fact, as well as on the 8% increase
REM, Int. Eng. J.. Publicado em: 2020-03
-
4. ANÁLISE DE AMOSTRAS DE COMBUSTÍVEIS POR FOTOMETRIA, NIR PORTÁTIL E RMN DE 1H - UMA COMPARAÇÃO COM OS RESULTADOS ENCONTRADOS POR TÉCNICAS NORMATIZADAS
It has been recurring adulterations in fuels (such as gasoline, ethanol and diesel), being necessary the exploration of the use of more modern analytical techniques capable of controlling the quality of these fuels, since some regulated tests may be inefficient to detect the adulteration. Among them, it is highlighted proton nuclear magnetic resonance (1H NM
Quím. Nova. Publicado em: 2020-02
-
5. IDENTIFICAÇÃO DE ADULTERANTES DE BIODIESEL METÍLICO DE CRAMBE EM MISTURAS COM DIESEL, USANDO FT-MIR E CARTAS DE CONTROLE MULTIVARIADAS BASEADAS NO SINAL ANALÍTICO LÍQUIDO
Adulterants in biodiesel/diesel blends modifies its physical and chemical properties. In this work, Fourier Transform Mid-Infrared spectrometry (FT-MIR) and multivariate control charts based on Net Analyte Signal (NAS) were used to monitor the quality of Crambe methyl biodiesel in relation to the biodiesel content and the presence of adulterants. The calibra
Quím. Nova. Publicado em: 2020-01
-
6. SEPARATION OF SULFUR-CONTAINING COMPOUNDS FROM DIESEL BY OXIDATION FOLLOWED BY SOLVENT EXTRACTION IN A SINGLE DROP COLUMN
Abstract Oxidative desulfurization (ODS) is an attractive complementary or alternative process for the hydrodesulfurization (HDS) process due to advantages such as mild operating conditions. In the ODS process, the sulfur-containing compounds are oxidized first to polar sulfoxide and sulfone products and then these polar compounds are separated using solvent
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
7. SYNTHESIS OF MORPHOLINE-BASED IONIC LIQUIDS FOR EXTRACTIVE DESULFURIZATION OF DIESEL FUEL
Abstract Extractive desulfurization with ionic liquids has attracted significant attention from a growing number of scientists due to the current environmental restrictions on fuel. Protic ionic liquids (PILs) were synthesized via equimolar neutralization of morpholine and formic-based compounds. The obtained PILs were characterized by Fourier transform infr
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
8. MODEL PREDICTIVE CONTROL FOR PRODUCTION OF ULTRA-LOW SULFUR DIESEL IN A HYDROTREATING PROCESS
ABSTRACT There is a continual desire around the world to reduce the sulphur content of diesel fuel to ultra-low levels (below 10 ppm) due to environmental concerns and the intention of improving air quality and lowering harmful exhaust emissions of diesel engines. In this work, a hydrodesulfurization unit fed with multiple diesel streams was addressed using
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
9. Black Carbon Associated to PM1.0 and PM2.5: Mass Variation due to Combustion of Biodiesel/Diesel Blends (B5, B6, B7 and B8)
The present study aims to quantify black carbon (BC), particulate matter (PM1.0 and PM2.5, particles with diameter ≤ 1.0 and 2.5 µm, respectively) levels and their variability during the combustion of biodiesel/diesel blends used in heavy-duty vehicles. The samplings were conducted in the years 2014, 2016 and 2017 inside a semi closed bus station, a direc
J. Braz. Chem. Soc.. Publicado em: 2019-04
-
10. Evaluation of CO2 Biofixation and Biodiesel Production by Spirulina (Arthospira) Cultivated In Air-Lift Photobioreactor
ABSTRACT Spirulina is a microalgal genre that has the capacity to produce various bioproducts with applications in several areas including the energy sector. The study aimed to assess the ability of CO2 biofixation, biodiesel and other biocompounds production by Spirulina sp LEB 18 cultured in air-lift photobioreactor. The microalgae presented a rich macronu
Braz. arch. biol. technol.. Publicado em: 10/12/2018
-
11. Fine and Coarse Aerosol at Rio de Janeiro prior to the Olympic Games: Chemical Composition and Source Apportionment
During the period from June 2012 to June 2013, the concentrations and chemical composition of PM2.5 and PM2.5-10 (particulate matter with a diameter of 2.5 μm or less and between 2.5 and 10 μm, respectively) were monitored at four sampling points in the Rio de Janeiro metropolitan area, and two of the points were in close proximity to the 2016 Olympic Game
J. Braz. Chem. Soc.. Publicado em: 2018-03
-
12. Biocorrosion on Surface of ASTM A283 Carbon Steel, Exposed in Diesel S10 and Tap Water
This paper sets out to evaluate the corrosion and biocorrosion of carbon steel ASTM A283 exposed to a Diesel S10 oil/tap water system under static conditions for 90 days. The following analyzes were performed: physico-chemical in tap water, sulfur content in Diesel S10 and quantification of sessile microorganisms in the biofilm formed on the metal. To monito
Mat. Res.. Publicado em: 22/01/2018