Elastic Moduli
Mostrando 1-12 de 53 artigos, teses e dissertações.
-
1. Cellulose Nanocrystals and Jute Fiber-reinforced Natural Rubber Composites: Cure Characteristics and Mechanical Properties
A comparative study was conducted for three natural rubber (NR) composites: one containing raw jute fibers, one containing bleached jute fibers, and one containing cellulose nanocrystals (CNCs). The composites were prepared by adding each filler at 5 or 10 phr to the latex before chemical coagulation, and the composites were processed in a two-roll mixing mi
Mat. Res.. Publicado em: 26/08/2019
-
2. Obtención de compuesto de titanio con gradiente de porosidad mediante técnica pulvimetalúrgica
ABSTRACT Within the study of biomaterials for implantological use titanium is among the most widely employed metals due to its excellent corrosion and mechanical resistance. In spite of the advances made, there are some issues remaining with the value of the elastic moduli of the titanium (110GPa) in comparison with the elastic moduli of the cortical bone (2
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Piezoelectricity from Elastic and Dielectric Measurements on Unpoled Ferroelectrics
A method is described to assess the piezoelectric response of ferroelectric materials from the temperature dependence of the elastic moduli and dielectric constant of unpoled samples. The limits and advantages over the traditional methods on poled samples are discussed. A quantitative check is made by comparing the piezoelectric softening measured below the
Mat. Res.. Publicado em: 07/06/2018
-
4. Modeling the creep behavior of GRFP truss structures with Positional Finite Element Method
Abstract This paper presents the development of a formulation, based on Positional Finite Element Method, to describe the viscoelastic mechanical behavior of space trusses. The numerical method used was chosen due to its efficiency in the applications concerning nonlinear numerical analyses. The formulation describes the positional variation over time under
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
5. Monitoring Heat Treatments in Steels by a Non Destructive Ultrasonic Method
In order to determine if heat treatments can be discerned by nondestructive ultrasonic testing, samples of SAE 1045 and SAE 4140 steels were subjected to the classical heat treatments of annealing, normalizing, quenching, and quenching and tempering, and their elastics constants, Young's, shear and Poisson's moduli, were monitored by ultrasound. Results show
Mat. Res.. Publicado em: 24/08/2017
-
6. Orthotropic Elastic Properties Assessment of Sandwich Laminates
ABSTRACT: Sandwich structures are nowadays widely used due its excellent characteristics of matching light weight with high bend stiffness. However the complex nature of its composition turns the estimation of its mechanical elastic properties challenging. The objective of the present article is to propose an analytical/experimental model to estimate the ort
J. Aerosp. Technol. Manag.. Publicado em: 26/06/2017
-
7. Al and PEG Effect on Structural and Physicochemical Properties of CoFe2O4
In this work, pure and Alumina doped cobalt ferrite nanoparticles CoFe2−xAlxO4 (for x = 0.44) have been synthesized by the sol gel method. The influence of alumina doping on the morphological and mechanical properties of CoFe2O4 nano-particles were investigated by means of X-ray powder diffraction (XRD) and rietveld analysis. XRD analysis confirmed that th
Mat. Res.. Publicado em: 06/03/2017
-
8. Transverse Motions of Rectangular Plates Resting on Elastic Foundation and Under Concentrated Masses Moving at Varying Velocities
AbstractThis study concerns the dynamic characteristics of a prestressed isotropic, rectangular plate continuously supported by an elastic foundation and carrying accelerating mass M. Closed form solutions of the governing fourth order partial differential equations with variable and singular coefficients are presented. For the two-dimensional plate problem,
Lat. Am. j. solids struct.. Publicado em: 2015-07
-
9. Phase transition and elasticity of gallium arsenide under pressure
Geometry optimization calculations were performed for some structural, elastic and mechanical properties of gallium arsenide (GaAs) under pressures up to 25 GPa. In contrast to previous works, a recent Stillinger-Weber type potential was used for the first time to elaborate the pressure dependence aspects of GaAs. B3→B1 phase transition pressure was determ
Mat. Res.. Publicado em: 15/08/2014
-
10. Finite element analysis for mechanical characterization of 4D inplane carbon/carbon composite with imperfect microstructure
Finite element mesh of multi-directional 4D carbon/carbon (C/C) composite was reconstructed from 2D images obtained by X-ray tomography. Thus, imperfections in the composite such as voids, misalignment and cross-section distortion of the fibre bundles were directly incorporated in the finite element mesh. 2D images of the composite were also used for the cha
Lat. Am. j. solids struct.. Publicado em: 2014-03
-
11. Dynamical Elastic Moduli of the Ti-13Nb-13Zr biomaterial alloy by mechanical spectroscopy
Dynamical Elastic Moduli of the Ti-13Nb-13Zr biomaterial alloy were obtained using the mechanical spectroscopy technique. The sample with heat treatment at 1170K for 30 minutes and water quenched with subsequent aging treatment at 670 K for 3 hours (TNZ + WQ + 670 K/3 h), was characterized through decay of free oscillations of the sample in the flexural vibr
Mat. Res.. Publicado em: 04/09/2012
-
12. Dynamic and steady: shear rheological properties of xanthan and guar gums dispersed in yellow passion fruit pulp (Passiflora edulis f. flavicarpa)
Yellow passion fruit pulp is unstable, presenting phase separation that can be avoided by the addition of hydrocolloids. For this purpose, xanthan and guar gum [0.3, 0.7 and 1.0% (w/w)] were added to yellow passion fruit pulp and the changes in the dynamic and steady - shear rheological behavior evaluated. Xanthan dispersions showed a more pronounced pseudop
Brazilian Journal of Chemical Engineering. Publicado em: 2011-09