Electrochemical Cell
Mostrando 1-12 de 245 artigos, teses e dissertações.
-
1. Effect of Multi-Pass Rolling on the Performance of AZ31 Magnesium Alloy Anode in Mg-Air Battery
In this work, the influence of rolling passes on microstructure, corrosion behavior, electrochemical performance, and battery performance of AZ31 magnesium alloy was studied. The experimental results show that the grain size decreases first and then increases with rolling passes. Among them, the grain size of three passes rolled sample is the smallest, while
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. COMPREENDENDO OS MECANISMOS DE CORROSÃO DE LIGAS DE AL-CU-LI: UMA INVESTIGAÇÃO ATRAVÉS DE TÉCNICAS ELETROQUÍMICAS GLOBAIS E LOCAIS
In this study, the corrosion mechanism of an Al-Cu-Li alloy manufactured by two different treatment routes (T3 and T851) was evaluated by immersion and electrochemical tests in solutions containing chloride ions (Cl-). For both alloys, the formation of cavities on the surface was associated with micrometer-sized intermetallics (IM’s), however, in addition
Química Nova. Publicado em: 2022
-
3. Light-Assisted Batch Injection Analysis of Glucose Exploiting a p-n-Homojunction Based on Cu2O
This work describes the development of a photoelectrochemical sensor for glucose quantification exploiting a light assisted-batch injection analysis (BIA) cell. A light-emitting diode (LED) lamp was employed to control the incidence of light on the p-Cu2O/n-Cu2O/fluorine-doped tin oxide (FTO) photoactive platform in BIA cell. The p-Cu2O/n-Cu2O/FTO platform w
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
4. Synthesis of Triazoles by Electro-Assisted Click Reaction Using a Copper Foil Electrode
This paper presents an innovative pathway for the synthesis of triazoles using the well-known “click chemistry” assisted by the electrochemical oxidation of metallic Cu0. The click reaction is used to couple a wide range of biological interest compounds. In this case, faster and less polluting methods for a biological environment was achived by in situ C
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
5. CÉLULAS ELETROLÍTICA E A COMBUSTÍVEL CONFECCIONADAS COM MATERIAIS ALTERNATIVOS PARA O ENSINO DE ELETROQUÍMICA
The proposal addresses the electrochemical experimentation as a pedagogical instrument for the integral and dynamic student involvement, facilitating the teaching-learning process. The experimental proposal focuses on the conversion of electrical energy to chemical energy and vice versa. The experiments for the two simultaneous energy conversions were design
Quím. Nova. Publicado em: 2021-01
-
6. QUANTIFICACAO DE NANOPARTICULAS DE PRATA EM UM PRODUTO FARMACEUTICO POR ESPECTROFOTOMETRIA E POTENCIOMETRIA: UMA PROPOSTA PARA AULAS PRATICAS DE QUIMICA ANALITICA
Spectrophotometry and potentiometry techniques were used to quantify silver in an ophthalmic solution. A standard solution of silver nanoparticles was synthesized, from which an analytical method was developed to quantify silver in the sample. Potentiometric titrations of three samples were made, using an electrochemical cell containing an alternative metall
Quím. Nova. Publicado em: 2021-01
-
7. Changes within the care of hematopoietic cell transplantation patients after the shift of a Mexican institution to a COVID-19-only center
A new methodology using gas-diffusion microextraction (GDME) was developed for the analysis of volatile corrosion inhibitors (VCIs). The evaluation of the inhibition efficiency and corrosion rate (ν) was performed by NaCl deliquescence tests and correlated with measurements of polarization resistance (Rp) obtained from electrochemical impedance spectroscopy
Hematol., Transfus. Cell Ther.. Publicado em: 2020-10
-
8. COMPARATIVE STUDY OF TiO2 AND ZnO APPLICATION IN HYBRID SOLAR CELLS USING COPOLYMER P3OT/P3MT
Hybrid inorganic-organic solar cells are an attractive alternative energy source because of their low-cost production and ability to make use of a large amount of solar radiation available. This work aims to evaluate different solar cells composed of TiO2 and ZnO with P3OT/P3MT copolymer. Layers of semiconductor oxides were deposited on transparent fluorine-
Quím. Nova. Publicado em: 02/05/2019
-
9. Relationship between Electrochemical Parameters, Cytotoxicity Data against Cancer Cells of 3-Thio-Substituted Nor-Beta-Lapachone Derivatives. Implications for Cancer Therapy
Electrochemical methods are powerful in the characterization and design of redox-modulating agents. We, herein, report the electrochemical investigation, in aprotic medium, of eleven synthetic 3-thio-substituted-nor-beta-lapachones, along with the determination of cytotoxic activity and correspondent selectivity index, against several cancer cell lines and o
J. Braz. Chem. Soc.. Publicado em: 2019-03
-
10. Ag@Activated Carbon Felt Composite as Electrode for Supercapacitors and a Study of Three Different Aqueous Electrolytes
The main challenge for the development of a high efficiency supercapacitor is the electrode material. Developing electrode materials with high specific electrical capacitance and low electrical resistance enables an increase in the energy accumulated in the device. In addition, it is expected that the electrode material presents a simple procedure for prepar
Mat. Res.. Publicado em: 08/11/2018
-
11. Análisis de la corrosión de uniones por soldadura fuerte de compósitos matriz cobre
ABSTRACT This work presents an electrochemical corrosion study in synthetic seawater of the dissimilar joint of TiC/Cu composite by brazing technique. Composites were machined by liquid infiltration without external pressure. This composite were joined with copper using a filler material constituted by an alloy of silver - copper and titanium powder. The com
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. UM ESTUDO TERMODINÂMICO DA CORROSÃO DOS AÇOS CARBONO PELO SULFETO DE HIDROGÊNIO - EXPLORANDO CONCEITOS DE EQUILÍBRIO QUÍMICO
This study addresses an inherent problem to the oil and natural gas exploration and production industry, the corrosion of pipes and tanks by H2S. H2S with water emulsified in the oil or H2S with the water vapor mixed in the gas, they make the acid environment leading to corrosion. This is commonly manifested by the formation of insoluble sulfides on the surf
Quím. Nova. Publicado em: 2018-05