Finite Element Model
Mostrando 1-12 de 546 artigos, teses e dissertações.
-
1. Methodology to Generate a Reluctance Network Applied to Permanent Magnet Synchronous Generators
Abstract This paper presents a methodology for the generation of a static reluctance network, with magnetomotive sources only in the rotor, applied in the analysis and design of surface mounted permanent magnet synchronous generators. In the analysis stage, this network can provide the magnetic flux in several points of the generator, enabling an estimate of
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Numerical analysis of soft soil improved with stone column technique
Abstract The present research aims to do a numerical study on the behavior of a test embankment reinforced with stone column spacing of 1.85 m in a square grid with an average diameter of 1.0 m and 11.35 m length. The case study investigated the work in a steel company (ThyssenKrupp), located in Santa Cruz, western region of Rio de Janeiro - Brazil, where a
REM, Int. Eng. J.. Publicado em: 2021-09
-
3. Meshless Methods for Computation of Overhead Transmission Lines Electromagnetic Fields
Abstract The meshless element-free Galerkin method (EFGM) is used to solve partial differential equations responsible for obtaining the electromagnetic fields generated by a transmission line. For this purpose, a 2D model based in a real transmission line is constructed and simulated. The results obtained by EFGM have good accuracy and they are compared agai
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
4. Numerical analysis of collapse modes in optimized design of alveolar Steel-concrete composite beams via genetic algorithms
Abstract The objective of this study is to present the formulation and applications of the optimization problem of steel-concrete composite alveolar beams. In addition to presenting the formulation, a comparative analysis of the predominant collapse modes is performed numerically via the finite element method. The optimization program was developed with the
REM, Int. Eng. J.. Publicado em: 2021-06
-
5. Study of the interaction of concrete walls with the foundation structure
Abstract This article presents a study of the factors that influence the mechanism of soil-structure interaction with a pilot building having concrete walls and their impact on their performance. To illustrate the studies carried out, a numerical modeling of a four-floor concrete wall pilot building was performed, subjected to vertical actions, supported by
REM, Int. Eng. J.. Publicado em: 2021-06
-
6. PARAMETERS FOR MODELING PASSIVE SUSPENSIONS OF SPRAY BARS
ABSTRACT The uniformity and quality of spraying depend on the stability of the spray boom, defined as the suspension system between the boom and the machine chassis. This paper presents a procedure for improving the performance of passive spray bar suspensions through parameter adjustment. Two multibody dynamics models of a tractor sprayer set were developed
Eng. Agríc.. Publicado em: 2021-05
-
7. FEM-DEM simulation of Uniaxial Compressive Strength (UCS) laboratory tests
Abstract Finite/discrete element methods (FDEM) are hybrid numerical models that use algorithms to analyze the transition from continuous to discontinuous. This type of formulation allows modeling physical laboratory tests with greater proximity to reality. This article proposes to simulate the average behavior of a uniaxial compression test campaign. The te
REM, Int. Eng. J.. Publicado em: 2020-12
-
8. Bearing failure in bolted sleeve connections with circular hollow sections under compression
Abstract This article analyzes sleeve connections between circular hollow sections. This type of connection is composed of two tubes connected by bolts to an inner tube with a smaller diameter, and explores the efficiency, aesthetics and resistance of hollow sections subjected to tension and compression. In previous researches, sleeve connections with aligne
REM, Int. Eng. J.. Publicado em: 2020-06
-
9. Simultaneous Transfer of Na+, K+, and Fe2+ Ions During Salting of Precooked Mushroom (Agaricus bisporus): Mathematical Modeling, Optimization, and Experimental Validation
The champignon mushroom has no antinutritional factors that can affect iron bioavailability. It is considered a functional food and can provide health benefits by presenting bioactive components. The simultaneous transfer of Na+, K+ and Fe2+ in the pre-cooked mushroom (Agaricus bisporus) was modeled and simulated by the finite element method (FEM). The Biot
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
10. Mathematical Modeling of the Transesterification Reaction by Finite Elements: Optimization of Kinetic Parameters Using the Simplex Sequential Method
The use of biodiesel as fuel has been presented as a viable alternative in the search for renewable energies. It can be produced from the transesterification reaction of vegetable oils with methanol in the presence of sodium or potassium hydroxide as catalysts. In the present research, the transesterification reaction of soybean oil was modeled considering t
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
11. Effect of Plasma Arc Welding on Residual Stress and Distortion of Thin Titanium Sheet
In this research work, a finite element model is developed to predict the temperature field and residual stress during plasma arc welding of thin Ti-6Al-4V sheets. Dhinakaran’s heat source model which is based on Parabolic Gaussian distribution is used to predict the temperature field and Anand’s model is used to predict the residual stress. Numerical si
Mat. Res.. Publicado em: 20/01/2020
-
12. Simulation of Stress Distribution on the Upper First Molar and Alveolar Bone with the Transpalatal Arch and Upper Second Molar Using Finite Element Analysis
Abstract Objective: To evaluate the differences in the stress distribution on the upper first molar with and without transpalatal arch and a second molar when a 150 g force is applied during canine distalization using finite element analysis. Material and Methods: We constructed several models with data obtained by scanning human skulls using cone beam com
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 13/01/2020