Freeze
Mostrando 1-12 de 1270 artigos, teses e dissertações.
-
1. A novel fluorescence sensor for the detection of chloride ion in artificial sweat and environmental water with nitrogen-doped graphene quantum dots
A new fluorescent detection route for chloride ion was designed with Nitrogen-doped graphene quantum dots (N-GQDs), which were prepared by a traditional hydrothermal method with citric acid as carbon source and urea as nitrogen source. The prepared N-GQDs solution was light yellow, and the freeze-dried solid was black. It emitted blue light under ultraviolet
Química Nova. Publicado em: 2022
-
2. Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obt
Cerâmica. Publicado em: 2021-03
-
3. Obtenção de cerâmicas de alumina com porosidade graduada processadas pelas técnicas de colagem de barbotina e freeze casting
Resumo O objetivo foi estudar o processamento de materiais cerâmicos de alumina com porosidade graduada a partir das técnicas de freeze casting e colagem de barbotina sequencial, utilizando hidróxido de alumínio como fase de sacrifício. Após conformação, a porosidade foi caracterizada por microscopia eletrônica de varredura, medidas de porosidade ap
Cerâmica. Publicado em: 2021-03
-
4. Influence of block freeze concentration and evaporation on physicochemical properties, bioactive compounds and antioxidant activity in blueberry juice
Abstract This study investigated the impacts of centrifugal block freeze concentration (CBFC) and evaporation processes on physicochemical properties, bioactive compounds and antioxidant activity applied to fresh blueberry juice. After three concentration cycles, the solutes were approximately 3.6 times to the initial condition (12 °Brix) and the final colo
Food Sci. Technol. Publicado em: 2020-12
-
5. On the possibility of obtaining high-quality lyophilized collagen hydrolysate and its applicability in the sausage production
Abstract The paper discusses the issues of rational use of secondary collagen-containing raw material in the food industry, namely cattle by-products. The technology of obtaining collagen hydrolysate from this type of raw material with the subsequent freeze-drying is proposed, which maximizes the level of preservation of native properties and the expands the
Food Sci. Technol. Publicado em: 2020-09
-
6. ASPECTOS ESTRUTURAIS DE ESFERAS DE QUITOSANA/PVA RETICULADAS COM GLUTARALDEÍDO SUBMETIDAS A DIFERENTES TRATAMENTOS TÉRMICOS
Chitosan is a biopolymer derived from chitin and the most abundant polysaccharide in nature after cellulose. This biopolymer has been applied in different areas due its biodegradability and biocompatibility properties. Modifications of chitosan structure by cross-linking chemical agents can alter its physical, chemical, and morphological characteristics. The
Quím. Nova. Publicado em: 2020-09
-
7. Influence of drying methods on the physicochemical properties and nutritional composition of instant Tremella fuciformis
Abstract Instant Tremella fuciformis is ready to eat after adding hot water and is a delicious edible mushroom food. However, the drying method affects the quality of product. The present work evaluated the effects of freeze drying (FD), microwave drying (MD), and hot air drying (HAD) on shrinkage ratio, rehydration ratio, microstructure, polysaccharide and
Food Sci. Technol. Publicado em: 2020-09
-
8. Comparative assessment of nutritional composition and physicochemical properties of fresh, freeze- dried and rehydrated rainbow trout (Oncorhynchus mykiss Walbaum, 1792) mince
Abstract Freeze drying is known as the excellent drying method for heat sensitive food products. In this research was aimed to determination of nutritional composition and physicochemical properties of fresh, freeze- dried and rehydrated rainbow trout (Oncorhynchus mykiss) mince. Sample groups were established as fresh trout mince, freeze-dried trout mince a
Food Sci. Technol. Publicado em: 2020-06
-
9. Structural and physicochemical properties of freeze-dried açaí pulp (Euterpe oleracea Mart.)
Abstract The objective of this study was to characterize the structural and physicochemical properties, the bioactive compounds and the antioxidant activity of freeze-dried açaí pulp (FDAP). The morphology of freeze-dried açaí pulp showed a continuous matrix with a spongey aspect, and the X-ray diffractometry indicated that 96.17% of the molecular struct
Food Sci. Technol. Publicado em: 2020-06
-
10. Effects of freezing and thawing cycles on the quality of Nile tilapia fillets
Abstract The aim of this investigation was to evaluate the impact of multiple freezing and thawing cycles on the physicochemical properties of Nile tilapia fillets. For this purpose, 72 fresh Nile tilapia fillets were packed and stored in a freezer at -18 °C. The frozen samples were submitted to five freeze-thaw cycles; in each cycle, the freezer was switch
Food Sci. Technol. Publicado em: 2020-06
-
11. Application and comparison of proteolytic enzyme preparations in technology of protein hydrolyzates
Abstract Protepsin belongs to the class of acid proteinases, containing carboxyl groups in the active center. The preparation cleaves peptide bonds formed by aromatic amino acids (tyrosine, phenylalanine), and does not hydrolize esters and amides. Along with the proteolytic complex, Protepsin contains collagenase, lipase, and other digestive enzymes. The pre
Food Sci. Technol. Publicado em: 2020-06
-
12. Processo de freeze casting para a geração de porosidade graduada em cerâmicas de Al 2 O 3
Resumo Foram efetuadas a preparação e a caracterização de materiais cerâmicos de alumina com gradientes funcionais de porosidade utilizando o método de freeze casting. Foram estudados os efeitos dos parâmetros da rota de processamento na formação dos poros. As características dos poros foram analisadas quanto à morfologia e distribuição na matri
Cerâmica. Publicado em: 2020-03