Fuel Cell
Mostrando 1-12 de 206 artigos, teses e dissertações.
-
1. NORBORNADIENO: SÍNTESE E APLICAÇÕES
Bicyclo[2.2.1]hepta-2,5-diene or norbornadiene (NBD) is a bicyclic hydrocarbon molecule used in many fields of chemistry since its first synthesis in 1950. NBD is the precursor of Aldrin, an agrochemical that was commonly used as an insecticide until the end of the XX century. Norbornadiene is capable of interconverting into its isomer, quadricyclane (QC), b
Química Nova. Publicado em: 2022
-
2. STUDY ON THE OPTIMIZATION FOR THE SIZE OF FUEL CELL FLOW FIELD UNDER INADEQUATE AIR SUPPLY CONDITION
In this paper, the influence of the optimization for flow field size on the proton exchange membrane fuel cell (PEMFC) performance under the inadequate air supply of cathode was studied based on the three-dimensional, steady-state, and constant temperature PEMFC monomer model. Additionally, the effect of the optimization for hybrid factors, including length,
Quím. Nova. Publicado em: 2021-04
-
3. CÉLULAS ELETROLÍTICA E A COMBUSTÍVEL CONFECCIONADAS COM MATERIAIS ALTERNATIVOS PARA O ENSINO DE ELETROQUÍMICA
The proposal addresses the electrochemical experimentation as a pedagogical instrument for the integral and dynamic student involvement, facilitating the teaching-learning process. The experimental proposal focuses on the conversion of electrical energy to chemical energy and vice versa. The experiments for the two simultaneous energy conversions were design
Quím. Nova. Publicado em: 2021-01
-
4. Experimental and Theoretical Study of LiMn2O4 Synthesized by the Solution Combustion Method Using Corn Starch as Fuel
Lithium manganese oxide, LiMn2O4, was synthesized in two temperature stages, where the first consisted by an ecofriendly solution combustion method at 300 °C. Finally, the as-burned powders were thermal treated at 500 and 700 °C. The structural and morphological changes were evaluated by the Rietveld method and density functional theory (DFT) calculations.
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
5. KINETIC STUDIES OF HYDROLYSIS REACTION OF NaBH4 WITH γ-Al2O3 NANOPARTICLES AS CATALYST PROMOTER AND CoCl2 AS CATALYST
Abstract Solid-state hydrogen storage is of considerable concern as a potential hydrogen source for portable fuel cell applications. This study mainly focuses on kinetics of NaBH4/Al2O3 nanoparticles (20 nm)/H2O system with CoCl2 as catalyst and the factors that affect the hydrogen generation rate (HGR). It is observed that the reaction rate increases consid
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
6. Estudo de obtenção da membrana cerâmica densa BaCeO3
RESUMO Nos últimos anos, pós cerâmicos à base de óxidos de estrutura do tipo perovskita ganharam atenção considerável devido às suas aplicações tecnológicas na área de membranas permeáveis de oxigênio. O óxido misto BaCeO3 apesenta-se como um material amplamente estudado em uma grande diversidade de aplicações, seja como materiais eletrolí
Matéria (Rio J.). Publicado em: 20/05/2019
-
7. Fases identificables en la zona de interacción de placas combustibles dispersas U3Si2/Al
ABSTRACT Fuel elements based on U3Si2 particles dispersed in a pure Al matrix (known as dispersion fuel element) are known to be very stable under irradiation, in plate type configurations. For this reason, they were or are being used to convert to low enriched uranium a large number of research reactors without significant loss in performance. According to
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Nafion/sulfonated poly(indene) polyelectrolyte membranes for fuel cell application
Abstract Sulfonated poly(indene) (SPInd), with 35% and 45% degree of sulfonation, was blended with Nafion to prepare blended membranes with 10, 15 and 20 wt.% of SPInd. Membranes were evaluated by infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy and X-ray diffraction. Water uptake (WU), ion ex
Polímeros. Publicado em: 10/07/2018
-
9. Activity and Stability of Dispersed Multi Metallic Pt-based Catalysts for CO Tolerance in Proton Exchange Membrane Fuel Cell Anodes
ABSTRACT Studies aiming at improving the activity and stability of dispersed W and Mo containing Pt catalysts for the CO tolerance in proton exchange membrane fuel cell (PEMFC) anodes are revised for the following catalyst systems: (1) a carbon supported PtMo electrocatalyst submitted to heat treatments; (2) Pt and PtMo nanoparticles deposited on carbon-supp
An. Acad. Bras. Ciênc.. Publicado em: 16/04/2018
-
10. Study of NiO-GDC material produced by aqueous tape casting
ABSTRACT Studies have been developed in last decades in order to produce NiO-based material to be used as anode in solid oxide fuel cell (SOFC). Aqueous-based tape casting was used to produce NiO-GDC substrates with smooth and homogeneous surfaces and good flexibility. Physical and mechanical properties were obtained in green tapes sintered at temperatures r
Matéria (Rio J.). Publicado em: 08/01/2018
-
11. Optimization of the performance of a microbial fuel cell using the ratio electrode-surface area / anode-compartment volume
Abstract This paper focus on the determination of the influence of the electrode-surface area / anode-compartment volume ratio (ESAVR) on the performance of microbial fuel cells (MFC), both in terms of the generation of electricity and the removal of organic matter from waste. Real wastewater coming from a winery factory was used and five ESAVRs were tested
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
12. Proton Exchange Membrane Based on Sulfonated Poly (Aromatic Imide-Co-Aliphatic Imide) for Direct Methanol Fuel Cell
A new sulfonated poly(aromatic imide-co-aliphatic imide) (SPI) for the use as a polymer electrolyte membrane was successfully synthesized from 4,4'-diaminodiphenylmethane (DDM), 4,4'-diaminodiphenylmethane-2,2'-disulfonic acid disodium salt (S-DDM), hexamethylenediamine, and 3,3',4,4'-benzophenonetetracarboxylic dianhydride in a one-step reaction. S-DDM was
Mat. Res.. Publicado em: 18/12/2017