Fuel Synthesis
Mostrando 1-12 de 81 artigos, teses e dissertações.
-
1. Impact of fuel quantity on luminescence properties of Sr3Al2O6:Eu by combustion synthesis
Abstract The photoluminescent behavior of Eu-doped Sr3Al2O6 obtained by highly efficient solution combustion synthesis is reported. In order to understand the influence of the fuel on the synthesis, the stoichiometric quantity and an excess of fuel were evaluated. By adjusting the amount of fuel, different luminescence responses were obtained, allowing europ
Cerâmica. Publicado em: 2023
-
2. Synthesis of delafossite CuCrO2 via solution combustion method and its acid functionalization for biodiesel production
Abstract CuCrO2 was synthesized by solution combustion synthesis (SCS) and applied as a heterogeneous catalyst to produce soybean biodiesel. The combustion reaction was carried out using urea as a fuel, and copper (II) and chromium (III) nitrates as precursors. After the powders’ obtention, these were calcined and functionalized in an acidic medium. The po
Cerâmica. Publicado em: 2023
-
3. NORBORNADIENO: SÍNTESE E APLICAÇÕES
Bicyclo[2.2.1]hepta-2,5-diene or norbornadiene (NBD) is a bicyclic hydrocarbon molecule used in many fields of chemistry since its first synthesis in 1950. NBD is the precursor of Aldrin, an agrochemical that was commonly used as an insecticide until the end of the XX century. Norbornadiene is capable of interconverting into its isomer, quadricyclane (QC), b
Química Nova. Publicado em: 2022
-
4. Synthesis of Antioxidant Additive from Safflower Seed Oil
Several published studies have evaluated the problems associated with the utilization of biodiesel obtained from safflower (Carthamus tinctorius L.) oil due to the low oxidative stability, caused by the high content of unsaturated fatty acids. Thus, this study aimed at the extraction of safflower seed oil and its use as an unsaturation source to obtain a syn
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
5. Design, Synthesis, and Application of Colored Cobalt Pigments (Pink, Blue, Green)
The combination of white or colorless oxides (MgO, Al2O3, ZnO) with colorant ions (Co2+) generates colored pigments (pink, blue, green). The color is caused by the insertion of the colorant ion in the respective crystal lattices (periclase, alumina, wurtzite), as verified by X-ray diffraction. Absorption spectra in the visible region show analogous triplet b
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
6. High Conversion of Palm Olein to Ethyl Esters Using a Strong Anion Exchange Resin: Study of the Operational Parameters
Biodiesel, known as a mixture of fatty acid ethyl/methyl esters, is seen as an alternative, ecofriendly, biodegradable and renewable non-fossil fuel. The use of heterogeneous catalysts for biodiesel synthesis can solve several problems associated with the homogeneous alkaline catalyzed-transesterification. Therefore, this work reports the evaluation of the c
J. Braz. Chem. Soc.. Publicado em: 2020-07
-
7. INFLUÊNCIA DA COMPOSIÇÃO DOS NANOFIOS PT-IR/C NA ATIVIDADE CATALÍTICA FRENTE A OXIDAÇÃO ELETROQUÍMICA DE ETANOL EM MEIO ÁCIDO
Carbon-supported platinum-iridium nanowire-shape electrocatalysts containing 20% of metallic loading were synthesized by chemical reduction method using formic acid as a reducing agent and tested towards the oxidation of ethanol in acidic medium. The developed electrocatalysts were synthesized with the following compositions: Pt0.9Ir0.1/C, Pt0.8Ir0.2/C, Pt0.
Quím. Nova. Publicado em: 2020-02
-
8. SYNTHESIS OF MORPHOLINE-BASED IONIC LIQUIDS FOR EXTRACTIVE DESULFURIZATION OF DIESEL FUEL
Abstract Extractive desulfurization with ionic liquids has attracted significant attention from a growing number of scientists due to the current environmental restrictions on fuel. Protic ionic liquids (PILs) were synthesized via equimolar neutralization of morpholine and formic-based compounds. The obtained PILs were characterized by Fourier transform infr
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
9. Estudio de las propiedades, estructurales, morfológicas y ópticas de nanopartículas de Cr2O3 sintetizadas por procesos de combustión de un solo paso y diferentes combustibles
ABSTRACT This research presents a novel one–step solution combustion synthesis to obtain nano-structured Cr2O3 from chrome nitrate solution and one fuel such as aspartic acid (Asp) or Lysine (Lys), or Autor Restrihydroxymethylaminomethane (Tris) or ethylenediaminetetraacetic acid (Edta). Once obtained, the ashes were calcined at 500°C. The powders were ch
Matéria (Rio J.). Publicado em: 16/09/2019
-
10. Obtención de nanopartículas de LiCoO2 mediante síntesis por combustión de soluciones
ABSTRACT Lithium Cobalt Oxide (LiCoO2) nanoparticles were obtained by the Solutions Combustion Synthesis method, using starch as fuel. Four starch/nitrates ratios (φe) (ranging 0.5-1.25) have been studied. One route was a conventional, stoichiometric process, while the other ones were a nonstoichiometric process. The samples were calcined in air at 773K. Th
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Continuous Synthesis of a Green Fuel Additive Mixture with Highest Quantities of Solketalacetin and Solketal and Lowest Amount of Diacetin from Biodiesel-Derived Glycerol
This work presents a continuous, easy-to-scale-up system for glycerol conversion to a valuable fuel additive mixture such as solketalacetin ((2,2-dimethyl-1,3-dioxolan-4-yl)methyl acetate), solketal and minimum amount of diacetin with no byproducts. A two-stage reaction was conducted to synthesize the mixture. At first, glycerol was reacted with acetic acid
J. Braz. Chem. Soc.. Publicado em: 2018-06
-
12. Synthesis of the Perovskite-Type BaCe0.8Pr0.05Cu0.15O3-δ via EDTA-Citrate
BaCeO3-based ceramics are ionic and electronic conductors that can be applied to oxygen sensors, solid oxide fuel cells and oxygen permeable membranes. However, the low chemical stability at high temperatures of these materials motivates studies involving doping of A and/or B sites of the perovskite structure. In this context, the present work aimed to synth
Mat. Res.. Publicado em: 06/11/2017