Glass Ceramics
Mostrando 1-12 de 75 artigos, teses e dissertações.
-
1. Efeito da adição de resíduo de vidro em massa de cerâmica de alvenaria
RESUMO Este trabalho investigou o efeito da adição de resíduo de vidro para fabricação de cerâmica de alvenaria. Foram conformados corpos-de-prova cilíndricos de 27 mm de diâmetro por 45 mm de altura, a partir da massa padrão de uma indústria de cerâmica vermelha e outras 3 formulações (5, 10 e 20%) com incorporação de vidro, baseado em estudo
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Effects of Heat Treatment and Yb 3+ Concentration on the Downconversion Emission of Er 3+ /Yb 3+ Co-Doped Transparent Silicate Glass-Ceramics
The SiO2-Al2O3-BaF2-TiO2-CaF2 transparent silicate glass-ceramics containing BaF2 nanocrystals were successfully prepared by heat treatment process through conventional melting method. Effects of heat treatment processes and Yb3+ concentration on the downconversion (DC) emission of the co-doped Er3+/Yb3+ transparent silicate glass-ceramics were investigated.
Mat. Res.. Publicado em: 28/10/2019
-
3. Reinforced Glass-ceramics: Parametric Inspection of Three-Dimensional Wear and Volumetric Loss after Chewing Simulation
Resumo O objetivo deste estudo foi investigar o desgaste tridimensional, perda volumétrica e rugosidade após a simulação de mastigação de dois materiais vitro-cerâmicos. Discos de dissilicato de lítio (LD, Emax CAD, Ivoclar) e silicato de lítio reforçado com zircônia (ZLS, Vita Suprinity, Vita Zhanfabrick) (n=20/g) foram confeccionados e digitaliz
Braz. Dent. J.. Publicado em: 07/10/2019
-
4. Characterization of Li2O-Al2O3-SiO2 glass-ceramics produced from a Brazilian spodumene concentrate
Resumo Vitrocerâmicas do sistema LAS (Li2O-Al2O3-SiO2) com elevada resistência ao choque térmico foram obtidas com sucesso com o uso de um concentrado de espodumênio brasileiro como principal matéria-prima (80%-70% em massa). Duas composições (Li2O.Al2O3.nSiO2) foram produzidas com n= 2 e 4, próximas às composições estequiométricas das fases eucr
Cerâmica. Publicado em: 15/08/2019
-
5. Fire exposure behavior of epoxy reinforced with jute fiber applied to ceramic tiles for a ventilated facade system
Civil construction seeks to increase the useful life of the facades of buildings. Installing a ventilated facade is one way to accomplish this due to aesthetic and technical advantages. Ceramic tiles are the main products used as the covering. To the back face of a tile, a bidirectional screen of glass fiber is adhered using epoxy resin. This set forms a com
Mat. Res.. Publicado em: 18/07/2019
-
6. Microtensile bond strength of root canal dentin treated with adhesive and fiber-reinforced post systems
Abstract Nowadays, demand for esthetic restorations has risen considerably; thus, nonmetal esthetic posts made of either high-strength ceramics or reinforced resins, such as fiber-reinforced resin posts, have become more and more popular. Important characteristics of fiber-reinforced posts involve a modulus of elasticity similar to dentin and their ability t
Braz. oral res.. Publicado em: 01/07/2019
-
7. Desempenho balístico de estruturas multicamadas à base de alumina/epóxi
Resumo Alumina é comumente utilizada em blindagens compostas. Apresenta baixa tenacidade à fratura e esta propriedade está relacionada à resistência a múltiplos disparos. Com o intuito de melhorar a durabilidade em campo uma alternativa seria utilizar cerâmicas multicamadas. Neste estudo foi avaliado o desempenho balístico de estruturas multicamadas
Cerâmica. Publicado em: 06/06/2019
-
8. Mechanical and bioactivity assessment of wollastonite/PVA composite synthesized from bentonite clay
Resumo Os compósitos de vidro/polímero podem imitar a estrutura natural do osso possuindo uma configuração fibra-matriz que proporciona propriedades físicas e biológicas apropriadas. As cerâmicas de wollastonita são conhecidas por suas bioatividade e biocompatibilidade promissoras quando aplicadas na regeneração óssea. O álcool polivinílico (PVA
Cerâmica. Publicado em: 06/06/2019
-
9. Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics
Abstract: The objective of this study was to evaluate the effect of the hydrofluoridric acid (HF) concentration and time of acid conditioning on bond strength of three glass ceramics to a resin cement. Thus, fifty blocks (10 mm x 5 mm x 2 mm) of each ceramic (LDCAD: IPS e.max CAD; LCAD: IPS Empress CAD and LDHP: IPS e.max Press) were made and embedded in acr
Braz. oral res.. Publicado em: 16/05/2019
-
10. Brittleness index and its relationship with materials mechanical properties: Influence on the machinability of CAD/CAM materials
Abstract: The aim of this study is to evaluate the machinability of four CAD/CAM materials (n = 13) assessed by brittleness index, Vickers hardness, and fracture toughness and interaction among such mechanical properties. The materials selected in this in vitro study are Feldspathic ceramic [FC], Lithium-disilicate glass ceramic [LD], leucite-reinforced glas
Braz. oral res.. Publicado em: 04/04/2019
-
11. Fatigue strength of several dental ceramics indicated for CAD-CAM monolithic restorations
Abstract This in vitro study evaluated the fatigue strength of different ceramic materials indicated for monolithic restorations. Disc-shaped specimens were made according to ISO 6872 from five different ceramic materials: feldspathic ceramic (FC), polymer-infiltrated ceramic network (PIC), lithium disilicate glass-ceramic (LD), zirconia-reinforced lithium s
Braz. oral res.. Publicado em: 11/06/2018
-
12. The effect of hydrofluoric acid and resin cement formulation on the bond strength to lithium disilicate ceramic
Abstract To investigate how the hydrofluoric acid (HF) concentrations applied to a lithium disilicate glass-ceramic (EMX) affects the surface morphology and microtensile bond strength (μTBS) of ceramics to dentin, using light-cured resin cements with or without UDMA. Sixty-three EMX square ceramic blocks were etched for 20 seconds using different HF concent
Braz. oral res.. Publicado em: 24/05/2018