Gravitational Model
Mostrando 1-12 de 68 artigos, teses e dissertações.
-
1. Performance evaluation of GSA, SOS, ABC and ANN algorithms on linear and quadratic modelling of eggplant drying kinetic
Abstract In this study, kinetics of eggplant drying was modeled in the laboratory-scaled Food Drying Oven (FDO) with resistance heater was designed and manufactured. The temperature, energy consumption and drying time of FDO were recorded by keeping the temperature of at different temperatures as 40, 50 and 60 °C. These saved values were chosen as the input
Food Sci. Technol. Publicado em: 2020-09
-
2. Performance evaluation of GSA, SOS, ABC and ANN algorithms on linear and quadratic modelling of eggplant drying kinetic
Abstract In this study, kinetics of eggplant drying was modeled in the laboratory-scaled Food Drying Oven (FDO) with resistance heater was designed and manufactured. The temperature, energy consumption and drying time of FDO were recorded by keeping the temperature of at different temperatures as 40, 50 and 60 °C. These saved values were chosen as the input
Food Sci. Technol. Publicado em: 20/12/2019
-
3. Assessment of concrete anisotropy by means of compression and indirect tensile tests
Resumo Na análise e projeto estrutural de concreto armado, normalmente se assume que o material é isotrópico e homogêneo. As caraterísticas pontuais das estrutura, geralmente exercem pouca influência no comportamento das mesmas, portanto normalmente são desconsideradas. No entanto, existem muitas evidencias de que, na mesoescala, o concreto convencion
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
4. Comparação entre simulação e sistema real de vibração com dois graus de liberdade
Resumo Na engenharia, compreender corretamente os elementos que compõem os sistemas vibratórios e a física envolvida nestes é fundamental no projeto de estruturas e máquinas, por exemplo. Embora em muitos casos, no estudo de sistemas vibratórios não seja possível analisar o sistema somente com um grau de liberdade, sistemas com dois graus ou mais sã
Rev. Bras. Ensino Fís.. Publicado em: 20/05/2019
-
5. A biomechanical study on proximal junctional kyphosis following long-segment posterior spinal fusion
Posterior long-segment spinal fusion may lead to proximal junctional kyphosis (PJK). The present study sought to identify the appropriate fusion levels required in order to prevent PJK using finite element analysis. A finite element model was constructed based on the whole-spine computed tomography findings of a healthy adult. Nine commonly used posterior sp
Braz J Med Biol Res. Publicado em: 25/04/2019
-
6. EFFECT OF WATER CONTENT, TEMPERATURE AND AVERAGE DROPLET SIZE ON THE SETTLING VELOCITY OF WATER-IN-OIL EMULSIONS
AbstractWater-in-oil (W/O) emulsions are complex mixtures generally found in crude oil production in reservoirs and processing equipment. Sedimentation studies of water-oil emulsions enable the analysis of the fluid dynamic behavior concerning separation of this system composed of two immiscible liquids. Gravitational settling was evaluated in this article f
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
7. Relative Motion Guidance, Navigation and Control for Autonomous Orbital Rendezvous
ABSTRACT: In this paper, the dynamics of the relative motion problem in a perturbed orbital environment are exploited based on Gauss' variational equations. The relative coordinate frame (Hill frame) is studied to describe the relative motion. A linear high fidelity model is developed to describe the relative motion. This model takes into account primary gra
J. Aerosp. Technol. Manag.. Publicado em: 2014-09
-
8. Melhoria do EGM2008 em escala local através de dados de nivelamento e GPS
O desenvolvimento do modelo Earth Gravitational Model 2008 (EGM2008) é uma contribuição significante para a modelagem do geoide e gravidade da Terra. Atualmente, ele pode ser utilizado com segurança em conjunto com modelos geométricos, seguindo um procedimento simples de refinamento. Vários estudos mostram que o EGM2008 pode alcançar a acurácia dos m
Bol. Ciênc. Geod.. Publicado em: 2014-03
-
9. Contribuição ao estudo da estabilidade de edifícios de andares múltiplos em aço / Contribution to the study of stability of steel multi-storey buildings
This work presents a comparative analysis of different structural systems for a 20-storey building. Each model has been designed using the principles of the direct analysis method (DAM), present in the ABNT NBR 8800:2008. The first-order amplification method (FOAM) was used to obtain, in a simplified manner, the forces acting on the building elements, includ
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/08/2012
-
10. Modelamiento geométrico del cambio de coordenadas UTM causadas por mudanza de referencial geodésico: Caso Sirgas - Chile
Technological advances in recent decades have allowed determining with increasing precision, parameters related to size, shape and gravitational field of the Earth. These new technologies and methods of observation and analysis, accept the use of different Geodetic Reference Systems (GRS) that enable the description of position of any point on Earth's surfac
Bol. Ciênc. Geod.. Publicado em: 2012-12
-
11. Estudo da perda de carga e calor no poço injetor no processo De drenagem gravitacional assistida por vapor (SAGD)
The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the vi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/09/2011
-
12. Estudo de modelos e condições iniciais da geração a priori de detritos espaciais e sua propagação orbital / Study of models and initial conditions of a priori generation of space debris and their orbital propagation
Currently, it is estimated that there are hundreds of thousands of space debris, of various sizes, around the Earth. The space debris, also known as orbital debris, can remain in orbit with other bodies for a long time; and can cause risks of collision, including with space vehicles still in operation. In addition, there are risks of potential accidents by r
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/04/2011