Hollow
Mostrando 1-12 de 342 artigos, teses e dissertações.
-
1. Hybrid MAPbI3 Perovskite Growth Mechanism from Irregular Particles to Cuboid and Hopper-Type Morphologies
Methylammonium lead iodide (MAPbI3), used as light-harvesting layer in solar cell devices, has attracted great attention from scientific community due to its excellent photovoltaic performance. In this work, we have shown a comprehensive study on the hybrid organic-inorganic MAPbI3 perovskite growth mechanism from irregular small particles to cuboid shape fo
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Silicon carbide hollow fiber membranes developed for the textile industry wastewater treatment
Abstract In order to reduce the impacts of the industrial effluent on the environment, silicon carbide hollow fiber membranes were prepared by the precipitation-immersion technique and sintered at 1450 and 1500 °C. The membranes were characterized by X-ray diffraction, their surface structure was characterized by scanning electron microscopy and atomic forc
Cerâmica. Publicado em: 2021-06
-
3. Effectiveness of coffee leaf miner control associated with spray deposition in coffee leaves
ABSTRACT Coffee production faces challenges due to the susceptibility of the crop to insects. Owing to the coffee leaf miner Leucoptera coffeella, which is one of the main insect pests, the technology for the application of phytosanitary measures becomes the main challenge for coffee growers. This study aimed to evaluate the effectiveness of coffee leaf mine
Rev. Ceres. Publicado em: 2020-10
-
4. Bearing failure in bolted sleeve connections with circular hollow sections under compression
Abstract This article analyzes sleeve connections between circular hollow sections. This type of connection is composed of two tubes connected by bolts to an inner tube with a smaller diameter, and explores the efficiency, aesthetics and resistance of hollow sections subjected to tension and compression. In previous researches, sleeve connections with aligne
REM, Int. Eng. J.. Publicado em: 2020-06
-
5. POLYETHERIMIDE/POLYVINYLPYRROLIDONE HOLLOW-FIBER MEMBRANES FOR USE IN HEMODIALYSIS
Abstract In this study, polyetherimide/polyvinylpyrrolidone (PEI/PVP) hollow fiber membranes (HFMs) were synthesized by the phase inversion method. The synthesized PEI/PVP membranes were characterized by morphological analysis and transport properties (hydraulic permeability and solute rejection coefficient). Their performance in uremic solutes separation wa
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
6. 3D numerical investigation of mixture formation and combustion in a DISI engine at part-load under stratified operation
This work investigates through numerical simulation, the operation of a big bore direct fuel injection spark ignition engine, at part load under stratified operation. It evaluates fuel-air mixture preparation and combustion process with the adoption of detailed chemical kinetics mechanisms for both Isooctane and Ethanol, and applying adaptive mesh refinement
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2020
-
7. MODELING AND SIMULATION OF A VACUUM MEMBRANE DISTILLATION PLANT COUPLED WITH SOLAR ENERGY AND USING HELICAL HOLLOW FIBERS
Abstract This paper investigates the effect of operating conditions such as coil pitch, fiber diameter, distance between fiber and absorber internal wall and absorber diameter for a vacuum membrane installation coupled with solar energy and using helically coiled fiber to maximize the permeate flow rate. The model is based on a system of equations composed o
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
8. Influence of working pressure and spray nozzle on the distribution of spray liquid in manual backpack sprayers
RESUMO O uso de pulverizadores costais manuais no Brasil é amplamente disseminado em propriedades rurais. Entretanto, são escassos os trabalhos de pesquisa que avaliem as suas características de trabalho, sobretudo modelos de ponta de pulverização e condições de pressão de trabalho. Desta forma, o objetivo deste trabalho foi avaliar quanto os modelos
Arq. Inst. Biol.. Publicado em: 02/12/2019
-
9. Lightweight high-strength concrete with the use of waste cenosphere as fine aggregate
RESUMO Cenosfera é um sub-produto da combustão do carvão que apresenta interessantes propriedades para ser usado na produção de materiais cimentícios, tais como estrutura oca, baixa densidade, baixa térmica condutividade e notável estabilidade térmica. Além disso, ela mostra reatividade pozolânica na cura térmica. Entretanto, o potencial da cenos
Matéria (Rio J.). Publicado em: 25/11/2019
-
10. Efeito da adição de resíduo de vidro em massa de cerâmica de alvenaria
RESUMO Este trabalho investigou o efeito da adição de resíduo de vidro para fabricação de cerâmica de alvenaria. Foram conformados corpos-de-prova cilíndricos de 27 mm de diâmetro por 45 mm de altura, a partir da massa padrão de uma indústria de cerâmica vermelha e outras 3 formulações (5, 10 e 20%) com incorporação de vidro, baseado em estudo
Matéria (Rio J.). Publicado em: 25/11/2019
-
11. Preparation of Syntactic Foams made from Green Polyethylene and Glass Microspheres: Morphological and Mechanical Characterization
Polymeric syntactic foams are composites made from the mixture of Hollow Glass Microspheres (HGM) and polymer matrices. One of their main characteristics is their low density and the production of these composites using a matrix derived from renewable sources potentiates their development without neglecting sustainability. In this paper , the properties of H
Mat. Res.. Publicado em: 11/11/2019
-
12. Experimental study of reinforced masonry beams
Resumo Com objetivo de contribuir com o melhor entendimento do comportamento de vigas de alvenaria estrutural armada, foi realizado o estudo experimental de vigas de alvenaria armada com blocos de concreto. Essas foram projetadas para ruptura à flexão, sendo analisando o modo de fissuração, a flecha, o momento fletor último, a deformação por encurtame
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019