Hydrogen As Fuel
Mostrando 1-12 de 83 artigos, teses e dissertações.
-
1. CÉLULAS ELETROLÍTICA E A COMBUSTÍVEL CONFECCIONADAS COM MATERIAIS ALTERNATIVOS PARA O ENSINO DE ELETROQUÍMICA
The proposal addresses the electrochemical experimentation as a pedagogical instrument for the integral and dynamic student involvement, facilitating the teaching-learning process. The experimental proposal focuses on the conversion of electrical energy to chemical energy and vice versa. The experiments for the two simultaneous energy conversions were design
Quím. Nova. Publicado em: 2021-01
-
2. Lignocellulosic Residues from the Brazilian Juice Processing Industry as Novel Sustainable Sources for Bioenergy Production: Preliminary Assessment Using Physicochemical Characteristics
This work aims to investigate the energy-related characteristics of apple bagasse, orange bagasse and cashew-apple bagasse to identify their potential as bioenergy feedstocks. For this, a detailed characterization was performed, including proximate analysis, ultimate analysis, atomic molar ratio, heating values, chemical composition, bulk density, bioenergy
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
3. SEPARATION OF SULFUR-CONTAINING COMPOUNDS FROM DIESEL BY OXIDATION FOLLOWED BY SOLVENT EXTRACTION IN A SINGLE DROP COLUMN
Abstract Oxidative desulfurization (ODS) is an attractive complementary or alternative process for the hydrodesulfurization (HDS) process due to advantages such as mild operating conditions. In the ODS process, the sulfur-containing compounds are oxidized first to polar sulfoxide and sulfone products and then these polar compounds are separated using solvent
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
4. Facile One-Step Electrodeposition Fabrication of Amorphous MoS2 Catalysts in Titanium for Hydrogen Evolution Reaction
Hydrogen is seen as a future energy carrier that will assist the global energy fuel demand. However, it is still necessary to study efficient and inexpensive catalysts that can be used on a large scale to make this technology practical. In this paper the electrodeposition of molybdenum disulfide (MoS2) film on titanium (Ti) substrate was performed by cyclic
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
5. KINETIC STUDIES OF HYDROLYSIS REACTION OF NaBH4 WITH γ-Al2O3 NANOPARTICLES AS CATALYST PROMOTER AND CoCl2 AS CATALYST
Abstract Solid-state hydrogen storage is of considerable concern as a potential hydrogen source for portable fuel cell applications. This study mainly focuses on kinetics of NaBH4/Al2O3 nanoparticles (20 nm)/H2O system with CoCl2 as catalyst and the factors that affect the hydrogen generation rate (HGR). It is observed that the reaction rate increases consid
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
6. Life cycle analysis of HCNG light-duty vehicle demonstration project
ABSTRACT The demonstration is an effective initiative to bridge the gap between a premature technology and its large-scale commercialization. A systematic method of LCA was used to perform the well-to-wheel analysis of a CNG light-duty truck operated with 0%, 15%, and 30% blends of hydrogen with compressed natural gas fuel under the system boundary of “per
Matéria (Rio J.). Publicado em: 10/06/2019
-
7. Effect of blisters and rims on radial hydride precipitation in fuel elements under dry storage conditions
ABSTRACT Hydrogen enters in Zry clads during fuel element life in service; when hydrogen exceeds the terminal solid solubility, circumferential hydrides are precipitated. In the presence of thermal gradients, produced for instance by oxide spallation, localized concentration of hydrides - known as blisters - can be formed. Due to the fact that zirconium hydr
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Determinación de bajas concentraciones de hidrógeno en aleaciones de circonio utilizando radiografía de neutrones como técnica no destructiva
ABSTRACT Zircon base alloys (Zr) are used in the manufacture of fuel sheaths and structural components of power reactors because of their low neutron absorption. These alloys are susceptible to damage by hydrogen (H) because the concentration of the alloys can be increased locally in response to temperature or stress gradients. This causes a general degradat
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Activity and Stability of Dispersed Multi Metallic Pt-based Catalysts for CO Tolerance in Proton Exchange Membrane Fuel Cell Anodes
ABSTRACT Studies aiming at improving the activity and stability of dispersed W and Mo containing Pt catalysts for the CO tolerance in proton exchange membrane fuel cell (PEMFC) anodes are revised for the following catalyst systems: (1) a carbon supported PtMo electrocatalyst submitted to heat treatments; (2) Pt and PtMo nanoparticles deposited on carbon-supp
An. Acad. Bras. Ciênc.. Publicado em: 16/04/2018
-
10. Black-Box Fuzzy Identification of a Nonlinear Hydrogen Fuel Cell Model
RESUMO Uma identificação fuzzy da dinâmica de um sistema é desenvolvida com dados gerados por um simulador de uma célula de combustível de hidrogênio. Os dados obtidos são do tipo de entrada única - sáıda única, sem conhecimento prévio do modelo do sistema, e mostrando um comportamento não-linear. A escolha do método fuzzy para identificação
TEMA (São Carlos). Publicado em: 2017-12
-
11. ESTRATÉGIAS E MATERIAIS UTILIZADOS EM FOTOCATÁLISE HETEROGÊNEA PARA GERAÇÃO DE HIDROGÊNIO ATRAVÉS DA FOTÓLISE DA ÁGUA
Among the various technologies for the production of hydrogen fuel, heterogeneous photocatalysis is one of the most promising, especially with the use of semiconductors, notably TiO2. However, the use of TiO2 is limited by hindrances for the photolysis of water, such as wide bandgap, a less negative conduction band reduction potential as compared to that of
Quím. Nova. Publicado em: 2017-06
-
12. Preparation and Characterization of an Eco-Friendly Polymer Electrolyte Membrane (PEM) Based in a Blend of Sulphonated Poly(Vinyl Alcohol)/ Chitosan Mechanically Stabilised by Nylon 6,6
Abstract Membranes for fuel cell applications were prepared using two polymer blends: poly(vinyl alcohol) (PVAL) and chitosan (CS), 80/20 (w/w) and 60/40 (w/w) with and without nylon. Sulfosuccinic acid (SSA) was used both as a crosslinking and a sulfonating agent. An increasing in the SSA content raised ionic exchange capacity and consequently proton conduc
Mat. Res.. Publicado em: 21/07/2016