Immersed Boundary
Mostrando 1-12 de 30 artigos, teses e dissertações.
-
1. Studying Torsional Vibration of a Micro-shaft in a Micro-scale Fluid Media based on Non-classical Theories
Abstract In this paper, torsional vibration of a micro-shaft in interacting with a micro-scale fluid media has been investigated. The presented mathematical model for this study is made up of a micro-shaft with one end fixed and a micro-cylinder at its free end which is immersed in a micro-scale fluid media. The micro-shaft can be actuated torsionally via ap
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
2. Immersed Boundary Method Based on the Implementation of Conservation Equations along the Boundary using Control-Volume Finite-Element Scheme
ABSTRACT In this study conservation equations were implemented along the boundaries via ghost control-volume immersed boundary method. The control-volume finite-element method was applied on a cartesian grid to simulate 2-D incompressible flow. In this approach, mass and momentum equations were conserved in the whole domain including boundary control volumes
J. Aerosp. Technol. Manag.. Publicado em: 2017-09
-
3. Effect of surface finishing on friction and wear of Poly-Ether-Ether-Ketone (PEEK) under oil lubrication
Abstract The tribological properties of poly-ether-ether-ketone (PEEK) containing 30% of carbon fiber were studied in an oil-lubricated environment and different surface finishing of the metallic counterbody. Four different finishing processes, commonly used in the automotive industry, were chosen for this study: turning, grinding, honing and polishing. The
Polímeros. Publicado em: 08/12/2016
-
4. Numerical Simulation of the Wake Structure and Thrust/Lift Generation of a Pitching Airfoil at Low Reynolds Number Via an Immersed Boundary Method
ABSTRACT: In this study, an accurate computational algorithm in the context of immersed boundary methods is developed and used to analyze an incompressible flow around a pitching symmetric airfoil at Reynolds number (Re = 255). The boundary conditions are accurately implemented by an iterative procedure applied at each time step, and the pressure is also upd
J. Aerosp. Technol. Manag.. Publicado em: 2015-09
-
5. Modelagem matemática e simulação de escoamentos em canais anulares com interação fluido-estrutura / Mathematical modeling and simulation of flow in annular channels with fluid-structure interaction
O objetivo deste trabalho é de dar continuidade ao desenvolvimento de uma plataforma numérica em canais anulares, problemas presentes em engenharia de perfuração e da indústria de gás e petróleo. A plataforma numérica, desenvolvida utilizando o método de discretização dos volumes finitos, emprega métodos e esquemas de segunda ordem. A utilizaçã
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/03/2011
-
6. Numerical simulations of flows over a rotating circular cylinder using the immersed boundary method
In this paper, numerical simulations of incompressible flows around rotating circular cylinders have been performed. The two-dimensional Navier-Stokes equations are solved by using a Cartesian non-uniform grid. The Immersed Boundary Method (IBM) with the Virtual Physical Model (VPM) was used in order to model the presence of the circular cylinder in the flow
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-03
-
7. Sobre o acoplamento fluido-casca utilizando o método dos elementos finitos / On fluid-shell coupling using the finite element method
This work consists of the development of computational tools for nonlinear geometric fluid-shell interaction analysis using the Finite Element Method (FEM). The fluid solver is explicit and its time integration based on characteristics. The computational code is able to simulate the Navier-Stokes equations for compressible flows written in the Eulerian descr
Publicado em: 2011
-
8. Numerical solution of Navier-Stokes equations using a hybrid methodology of immersed boundary and Fourier pseudo-spectral / Solução numérica das Equações de Navier-Stokes usando uma hibridação das metodologias Fronteira Imersa e Pseudo-Espectral de Fourier
No presente trabalho é desenvolvida uma nova metodologia para a solução das equações de Navier-Stokes na formulação incompressível aplicada a escoamentos sobre geometrias complexas. Ela é baseada no acoplamento da metodologia pseudo-espectral de Fourier (MPEF) juntamente com a metodologia da fronteira imersa (MFI). As principais particularidades do
Publicado em: 2011
-
9. An Eulerian Immersed Boundary Method for flow simulations over stationary and moving rigid bodies
The fluid flow over bodies with complex geometry has been the subject of research of many scientists and widely explored experimentally and numerically. The present study proposes an Eulerian Immersed Boundary Method for flows simulations over stationary or moving rigid bodies. The proposed method allows the use of Cartesians Meshes. Here, two-dimensional si
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-12
-
10. Métodos de fronteira imersa em mecânica dos fluidos / Immersed boundary methods in fluid mechanics
No desenvolvimento de códigos paralelos, a biblioteca PETSc se destaca como uma ferramenta prática e útil. Com o uso desta ferramenta, este trabalho apresenta um estudo sobre resolvedores de sistemas lineares aplicados a escoamentos incompressíveis de fluidos em microescala, além de uma análise de seu comportamento em paralelo. Após um estudo dos dive
Publicado em: 2010
-
11. Desenvolvimento de procedimentos de modelagem de interação fluido-estrutura combinando a Teoria de Vigas de Cosserat e a metologia de fronteira imersa / Developing procedures for modeling fluid-structure interaction by combining the Cosserat beams theory and immersed boundary methodology
A presente tese descreve o trabalho de pesquisa realizado, com o objetivo de desenvolver, implementar e avaliar um procedimento de modelagem tridimensional de fenômenos fluidoestruturais que envolvem estruturas esbeltas, tais como vigas, barras e cabos. A nova abordagem adotada consiste na combinação da teoria de vigas de Cosserat aplicada a estruturas es
Publicado em: 2010
-
12. Estudo da camada limite interna desenvolvida em falésias com aplicação para o Centro de Lançamento de Alcântara / Study of the developed internal boundary layer downwind of coastal cliffs with application to the Brazilian launching center of Alcântara
Estudou-se o desenvolvimento da Camada-Limite Interna (CLI) gerada no interior da Camada-Limite Atmosférica (PBL), formada por vento neutro incidente a 90° em falésia, e causada pelo desnível da superfície e a alteração abrupta da rugosidade. Utilizaram-se dados observacionais, simulação numérica e ensaios em túnel de vento. Numericamente, realiza
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/07/2009