Immersion Tests
Mostrando 1-12 de 161 artigos, teses e dissertações.
-
1. Colorimetric analysis of dental porcelains: effects of the background color
Abstract This study evaluated how the background (white or gray) affects the color parameter measurements and color difference calculations (∆Eab and ∆E00) of dental ceramics. Disc-shaped feldspathic ceramic specimens were prepared with two shades (enamel and dentin) and stained in red wine (7-day immersion). A spectrophotometer was used to perform color
Cerâmica. Publicado em: 2022
-
2. COMPREENDENDO OS MECANISMOS DE CORROSÃO DE LIGAS DE AL-CU-LI: UMA INVESTIGAÇÃO ATRAVÉS DE TÉCNICAS ELETROQUÍMICAS GLOBAIS E LOCAIS
In this study, the corrosion mechanism of an Al-Cu-Li alloy manufactured by two different treatment routes (T3 and T851) was evaluated by immersion and electrochemical tests in solutions containing chloride ions (Cl-). For both alloys, the formation of cavities on the surface was associated with micrometer-sized intermetallics (IM’s), however, in addition
Química Nova. Publicado em: 2022
-
3. Influence of the physical characteristics of sand and the crushed filler content on the properties of self-leveling mortars
Abstract The properties of self-leveling mortars (SLMs) in the fresh and hardened state are strongly affected by their formulation. In this study, the influence of three different quartz sands (different physical characteristics) was investigated in SLMs, as well as the replacement of these sands by crushed basalt filler. The tests performed were: spreading,
Cerâmica. Publicado em: 2021-06
-
4. Aqueous Extract of Cumaru (Dipteryx odorata) Seeds as Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Solution
The corrosion inhibition of mild steel by aqueous extract of cumaru (Dipteryx odorata) seeds and its high molecular weight fraction (HMWF) was investigated in 1 mol L-1 HCl solution. The study was carried out through gravimetric essays, open circuit potential measurements, anodic and cathodic polarization curves and electrochemical impedance analyses, as wel
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
5. Aqueous Extracts of the Castor Beans as a Corrosion Inhibitor of Mild Steel in HCl Media
The present work studied aqueous extracts of castor beans as a natural inhibitor of the corrosion of mild steel in 1 M HCl using gravimetric tests, potentiodynamic polarization curves, linear polarization method, electrochemical impedance measurements, surface analysis by scanning electron microscopy (SEM) and chemical characterization by Fourier transform i
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
6. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
7. Study about concrete with recycled expanded polystyrene
Resumo O concreto leve obtido com adição de partículas de poliestireno expandido (EPS) é conhecido como concreto com EPS. Estudaram-se neste trabalho as propriedades de concretos com adição de EPS para uso em paredes estruturais. O EPS por ser um material produzido em larga escala e possuir baixa densidade, produz um grande volume de resíduos. Esses r
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
8. Adequacy of the tetrazolium test to evaluate the viability of Jatropha curcas L. seeds
Resumo: O teste de tetrazólio tem sido recomendado para a avaliação da viabilidade de sementes que apresentam germinação lenta e desuniforme, especialmente espécies agroflorestais. O objetivo do trabalho foi propor uma metodologia para avaliação da viabilidade das sementes de J. curcas L. pelo teste de tetrazólio e gerar recursos visuais que auxilie
J. Seed Sci.. Publicado em: 05/12/2019
-
9. Physicochemical Properties and Bioactive Potential of a New Epoxy Resin-based Root Canal Sealer
Resumo O objetivo deste estudo foi avaliar as propriedades físico-químicas e o potencial bioativo de Sealer Plus, em comparação com MTA Fillapex, Sealapex e AH Plus. Tempo de presa, escoamento e radiopacidade foram avaliados com base nas normas ISO 6876. O escoamento foi também avaliado em área (mm²). A solubilidade e a alteração volumétrica dos ci
Braz. Dent. J.. Publicado em: 28/11/2019
-
10. Influence of water absorption on glass fibre reinforced IPN composite pipes
Abstract Glass fibre reinforced composite pipes were fabricated by using an IPN blend of 0%, 10%, 20%, 30%, 40%, 50% PU prepolymer (Polyurethane) with VER(Vinylester) resin. The prepared IPN (Interpenetrating polymer networks) composite pipes were subjected to boiling water immersion tests in order to study the effect of moisture absorption characteristics.
Polímeros. Publicado em: 04/11/2019
-
11. Sanitary and physiological quality of ‘purple’ corn (Zea mays L.) seeds submitted to thermotherapy
RESUMO: O uso de sementes com bom potencial sanitário e fisiológico garante o estabelecimento da cultura, com estande de plântulas uniformes, vigorosas e livres de doenças, que consequentemente resultará em bons níveis de produtividade. Diante do exposto, objetivou-se avaliar a qualidade sanitária e fisiológica de sementes de milho roxo (Zea mays L.)
Arq. Inst. Biol.. Publicado em: 21/10/2019
-
12. Lime Addition Effect on Corrosion of Reinforced Mortar
ABSTRACT This study aims to investigate the effect of lime addition in cement mortar on corrosion resistance of carbon and galvanized steel reinforcements. Mixed mortars were studied containing three contents of lime (6.7, 13.3, and 26.3 wt.%). The water retention, incorporated air, and compression strength of reinforced mortars were determined. Immersion te
Matéria (Rio J.). Publicado em: 16/09/2019