In Situ Strength
Mostrando 1-12 de 99 artigos, teses e dissertações.
-
1. Geological - geotechnical characterization of different lithotypes in an underground mine
Abstract A mineralogical, geological and geotechnical characterization of several rock types (phyllite, dolomite, breccia and marl) from an underground mine site aimed, among other things, to identify its mineral composition and to provide parameters to support the understanding of rock mass behavior. For this purpose, it was possible to perform laboratory a
REM, Int. Eng. J.. Publicado em: 2021-01
-
2. Influence of the mode of application of universal adhesive systems on adhesive properties to fluorotic enamel
Abstract The objective of this study is to compare the resin-enamel bond strength (mμSBS), in-situ degree of conversion (DC), and the enamel-etching pattern (SEM/EDX) of universal adhesive systems when applied to sound and fluorotic enamel. Ninety-eight human molars were sectioned into 4 parts and divided into 24 groups according to 1) enamel surface (sound
Braz. oral res.. Publicado em: 25/11/2019
-
3. Estudo de caso do desempenho de estanqueidade à água de argamassas e hidrorrepelentes - Parte I
RESUMO Um dos agentes desencadeadores de manifestações patológicas em edificações é o ingresso de fluídos e sais em fachadas degradadas pela ausência de manutenção ao longo de sua vida útil. O presente estudo avalia o desempenho de estanqueidade à água de oito revestimentos argamassados, sendo dois dosados em obra e seis industrializados, e de q
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites
This work highlights the relationship between the preparation, crystallization behavior, microstructures, and mechanical properties of Cu-based bulk metallic glasses (BMGs) and their composites (BMGCs). (Cu47Zr45Al8)97.5Y1.5Nb in-situ BMGCs were prepared using isothermal annealing, and the experimental results indicate tunable mechanical properties of the al
Mat. Res.. Publicado em: 06/05/2019
-
5. Pros and cons of insulin administration on liver glucose metabolism in strength-trained healthy mice
Non-diabetic individuals use hormones like insulin to improve muscle strength and performance. However, as insulin also leads the liver and the adipose tissue to an anabolic state, the purpose of this study was to investigate the effects of insulin on liver metabolism in trained non-diabetic Swiss mice. The mice were divided into four groups: sedentary treat
Braz J Med Biol Res. Publicado em: 24/01/2019
-
6. Evaluation of Live Cuttings Effect on Slope Stability
ABSTRACT The aim of this work was to evaluate the development of shrub live cuttings and their effect on slope stability. Vertical in situ pullout tests and measurements of Phyllanthus sellowianus shoots and roots of 2, 4, 6, 8, 10 and 14 months old were conducted. Stability analyses were conducted for slopes with planar and curved rupture surfaces and for
Floresta Ambient.. Publicado em: 10/12/2018
-
7. Evolución microestructural in-situ a alta temperatura de depósitos de soldadura de aceros 9Cr con diferentes contenidos de boro
ABSTRACT New alloys have been developed for enhancing the performance of the equipment used in thermoelectric power generation industry. With the objective of increasing the creep resistance of these materials, changes in the content of some microalloying elements were carried out. Boron bearing in creep strength enhanced 9Cr steel (CSE9Cr) welds improved ma
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Preparation and Characterization of Mullite-Alumina Structures Formed "In Situ" from Calcined Alumina and Different Grades of Synthetic Amorphous Silica
The in situ reaction between alumina and silica to obtain mullite (Al6Si4O13) can be significantly affected by using synthetic amorphous silica (SAS) sources instead of crystalline ones (quartz and cristobalite). For instance, SASs promote early mullite formation (below 1300°C) and greater densification during sintering. This paper reports the "in situ" for
Mat. Res.. Publicado em: 12/03/2018
-
9. Effect on adhesion of a nanocapsules-loaded adhesive system
Abstract This study aimed to evaluate the in situ degree of conversion, contact angle, and immediate and long-term bond strengths of a commercial primer and an experimental adhesive containing indomethacin- and triclosan-loaded nanocapsules (NCs). The indomethacin- and triclosan-loaded NCs, which promote anti-inflammatory and antibacterial effects through co
Braz. oral res.. Publicado em: 01/02/2018
-
10. Lithium containing MgAl mixed oxides obtained from sol-gel hydrotalcite for transesterification
Abstract The innumerous advantages of heterogeneous catalysts employed in biodiesel production have stimulated the search for a solid catalyst capable of replacing the industrially used homogeneous catalysts. This paper investigates the effect of the sol-gel method in the catalytic activity and stability of Li-MgAl mixed oxides prepared by the “in situ”
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
11. In Situ Synchrotron Radiation Measurements During Axial Strain In Hydrogen Cathodically Charged Duplex Stainless Steel SAF 2205
The objective of this work is the evaluation of hydrogen effects on the martensitic transformation and strain hardening in Duplex Stainless Steels (DSS) SAF 2205 (UNS S32205/S31803). DSS are two-phase alloys (austenite and ferrite), which are used for applications requiring high mechanical strength, in corrosive environments. Therefore, it is necessary a bet
Mat. Res.. Publicado em: 18/12/2017
-
12. Microstructure and Properties of Cu-ZrO2 Nanocomposites Synthesized by in Situ Processing
In situ chemical reaction method was used to synthesize Cu-ZrO2 nanocomposite powders. The process was carried out by addition of NH4(OH) to certain amount of dispersed Cu(NO3)2·3H2O and ZrOCl2·8H2O solution. Afterwards, a thermal treatment at 650 °C for 1 h was conducted to get the powders of CuO and ZrO2 and remove the remaining liquid. The CuO was then
Mat. Res.. Publicado em: 23/10/2017