Interface Effects
Mostrando 1-12 de 339 artigos, teses e dissertações.
-
1. Effects of Geometrical Feature on Microstructures and Mechanical Properties of Refill Friction Stir Spot Welding 6061 Aluminum Alloy
Refill friction stir spot welding (refill FSSW) is a solid state joining technology developed and patented by Helmholtz-Zentrum Geesthacht. Refill FSSW is a welding process suitable for spot joining lightweight materials in similar and dissimilar joint configuration. The result is a spot welded in lap configuration with minimal material loss and a flat surfa
Mat. Res.. Publicado em: 17/01/2020
-
2. O Conceito de Vida: uma discussão à luz da educação
Resumo: Recolocar o conceito de vida no centro da discussão epistemológica é essencial para que se possa compreender sua potência e seus efeitos no interior de um discurso que antes de pretender ser científico, é filosófico. Nesse sentido, o presente ensaio joga luzes sobre a vida inserindo-a em uma espécie de grade de inteligibilidade construída a
Educ. Real.. Publicado em: 28/11/2019
-
3. Desenho Universal para Aprendizagem e Educação Inclusiva: uma Revisão Sistemática da Literatura Internacional1
RESUMO: Este estudo realizou uma revisão sistemática da literatura norteada pela seguinte questão de pesquisa: Como as pesquisas empíricas baseadas nos princípios do Desenho Universal para Aprendizagem - DUA têm influenciado a inclusão do Professor de Apoio Educacional Especializado - PAEE na literatura internacional? O objetivo geral estipulado foi m
Rev. bras. educ. espec.. Publicado em: 25/11/2019
-
4. Mudanças climáticas, ciência e sociedade
Resumo Este texto propõe uma breve apresentação dos estudos em sociologia das mudanças climáticas, sugerindo uma síntese do surgimento dessa área de pesquisa, suas principais contribuições para o debate e, em especial, destacando suas inter-relações com o campo dos Estudos Sociais em Ciência e Tecnologia (ESCT). Desse modo, pretende contextualiza
Sociologias. Publicado em: 02/09/2019
-
5. Numerical fundamentals and interactive computer graphics system for the nonlinear analysis of planar frames
Abstract Recent scientific and computational advances have facilitated the analysis of slender structural systems subject to instability. With the employment of more sophisticated numerical tools and algorithms, it is possible to accurately determine the critical points (limit and bifurcation loads) as well as the post-critical behavior of the structural sys
REM, Int. Eng. J.. Publicado em: 2019-06
-
6. Effects of composition on transformation temperatures and microstructure of Ni-Ti-Hf shape memory alloys
Abstract High transformation temperature shape-memory alloys (HTSMA) usually present a martensitic transformation temperature (Ms) starting at 100 ºC. That is the case of high nickel Ni-Ti-Hf alloys. This article presents experimental results obtained from arc melting of Ni50Ti50-XHfX .at% (X = 8, 11, 14, 17 and 20 .at%) alloys. This process homogenized eve
REM, Int. Eng. J.. Publicado em: 2019-06
-
7. Effects of artepillin C on model membranes displaying liquid immiscibility
It has been hypothesized that the therapeutic effects of artepillin C, a natural compound derived from Brazilian green propolis, are likely related to its partition in the lipid bilayer component of biological membranes. To test this hypothesis, we investigated the effects of the major compound of green propolis, artepillin C, on model membranes (small and g
Braz J Med Biol Res. Publicado em: 25/03/2019
-
8. Sericin as compatibilizer in starch/ polyester blown films
Abstract This study investigated the effects of low concentrations of sericin (≤ 1.5 wt%) in starch- poly(butylene-adipate-co-terephthalate) (PBAT) films. The films were produced by blown extrusion and mechanical, barrier and structural properties were determined. Films containing 1.0 and 1.5 wt% sericin showed higher tensile strength (6.41 and 6.59 MPa)
Polímeros. Publicado em: 29/11/2018
-
9. Characterization of Phase Transformations and Microstructural Changes in an API 5CT L80 Steel Grade During Ni Alloy Laser Cladding
The superficial coatings in micro-alloyed steel pipes has been a pointed way to decrease the corrosion problems in oil and gas industry. However, little emphasis has been given to the substrate. The effects of the deposition method on the steel microstructure and properties are still not well described. In this context, this work studied the effect of Ni sup
Mat. Res.. Publicado em: 26/07/2018
-
10. Minimization of polymerization shrinkage effects on composite resins by the control of irradiance during the photoactivation process
Abstract High levels of shrinkage stress caused by volumetric variations during the activation process are one of the main problems in the practical application of composite resins. Objective The aim of this study is to reduce the shrinkage stress and minimize the effects caused by composite resin volumetric variation due to the photopolymerization. In thi
J. Appl. Oral Sci.. Publicado em: 18/06/2018
-
11. Chlorhexidine and proanthocyanidin enhance the long-term bond strength of resin-based endodontic sealer
Abstract The aim of this study was to evaluate the effects of proanthocyanidin (PA) and chlorhexidine (CHX) on the bond strength (BS), failure pattern, and resin-dentin interface morphology of the endodontic sealers EndoREZ and AH Plus after 24 h and 6 months of water storage. A total of 120 prepared bovine roots were divided into six groups: AH Plus, CHX+AH
Braz. oral res.. Publicado em: 24/05/2018
-
12. Rolling Contact Fatigue Life of Rail for Different Slip Conditions
Abstract A three-dimensional elastic-plastic finite element analysis (FEA) is carried out to estimate the rolling contact fatigue (RCF) crack initiation life for varied slip range on the rail arising from operational variations. The wheel load produces Hertzian contact pressure. Variation in engine traction induces slip variations that evolves thermal load i
Lat. Am. j. solids struct.. Publicado em: 2017-12