Isothermal Fatigue
Mostrando 1-4 de 4 artigos, teses e dissertações.
-
1. Fadiga termomecânica em ligas de ferro fundido cinzento para discos de freio automotivos / Thermomechanical fatigue in gray cast iron alloys to automotive brake discs
Brake discs are submitted to thermal and mechanical stress that can be relatively high during abrupt braking action happens (fractions of seconds), causing the temperature to reach values as high as 600ºC. This temperature variation results in thermal shocks that can generate cracks and/or a large amount of plastic deformation in the disk. The main aim of t
Publicado em: 2007
-
2. Avaliação do efeito do Mg nas propriedades de fadiga em alta temperatura de ligas de Al-Si fundidas sob pressão em molde permanente / Magnesium addition effect on high temperature fatigue properties of permanent mold cast Al-Si alloys
Gear Box housings are usually subjected to cyclic stresses generated during engine operation. Such stresses are more critical at high temperatures and long times. Thermal gradients induced within the components submitted to variation of temperature during working may result in internal stresses and strains. Thermal cycling can result in crack nucleation and
Publicado em: 2006
-
3. Comportamento da liga de alumínio A356-T6 fundida e tixoextrudada sob fadiga isotérmica e termomecânica / Casting and tixoextruded A356-T6 aluminum alloy behavior under isothermal and thermomechanical fatigue
Gradientes térmicos induzidos no interior de componentes sujeitos a variações de temperatura durante o período de funcionamento podem provocar a ocorrência de tensões e deformações internas. A repetição destes ciclos térmicos pode causar a nucleação e a propagação de trincas por um processo denominado fadiga termomecânica. Este trabalho apres
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/08/2004
-
4. Estudo do comportamento da fadiga de baixo ciclo em altas temperaturas do aço inoxidável AISI 420. / Analysis of the low cycle fatigue behavior at high temperatures in a stainless steel AISI 420.
Os ensaios tradicionais de fadiga realizados à temperatura constante nem sempre são capazes de reproduzir os mecanismos atuantes na solicitação anisotérmica. Por isto, novas técnicas mais avançadas de ensaios à temperatura variável foram desenvolvidas recentemente como a Fadiga Térmica (FT) e a Fadiga Termomecânica (FTM). A parte experimental dest
Publicado em: 2002