Laminated Composite Materials
Mostrando 1-12 de 21 artigos, teses e dissertações.
-
1. Determinación de la tenacidad a la fractura J en laminados fibra-metal del tipo CARALL con láminas de aluminio 6061 y 1050
ABSTRACT Determination of fracture toughness in hybrid composites, fiber-metal laminates, FML (Fiber Metal Laminates) is very important to perform an analysis of structural integrity to estimate damage tolerance and residual strength of the material against the propagation of a crack This evaluation should be done in both naval and aircraft structures using
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Nondestructive characterization of epoxy matrix composites reinforced with Luffa lignocellulosic fibers
ABSTRACT Luffa Cylindrica is a tropical plant from the Cucurbitaceae family, whose fruit becomes very fibrous when fully ripened. The lignocellulosic sponges of Luffa can be suitable for use as reinforcement of epoxy matrix composites, because they have a morphology with spatial 3-D arrangement as well as are eco-friendly materials (biodegradable, and high a
Matéria (Rio J.). Publicado em: 20/07/2017
-
3. Simulation of Stress Concentration Problems in Laminated Plates by Quasi-Trefftz Finite Element Models
Abstract Hybrid quasi-Trefftz finite elements have been applied with success to the analysis of laminated plates. Two independent fields are approximated by linearly independent, hierarchical polynomials: the stress basis in the domain, adapted from Papkovitch-Neuber solution of Navier equations, and the displacement basis, defined on element surface. The st
Lat. Am. j. solids struct.. Publicado em: 2016-09
-
4. Evaluation of a nanostructured microwave absorbent coating applied to a glass fiber/polyphenylene sulfide laminated composite
The rapid coating of composites with absorbing paints yields materials that can absorb microwave radiation and still have approximately the same specific mass of the original composites. The use of paints with specific electromagnetic properties together with carbon- nanotube-based materials allows the production of structural materials of interest to the ae
Mat. Res.. Publicado em: 18/02/2014
-
5. A study on acoustic behavior of poroelastic media bonded between laminated composite panels
A study on the acoustic behavior of double-walled panels, with sandwiched layer of porous materials is presented within Classical Laminated Plate Theory (CLPT) for laminated composite panels. For this purpose, equations of wave propagation are firstly extracted based on Biot's theory for porous materials, then the transmission loss (TL) of the structure is e
Lat. Am. j. solids struct.. Publicado em: 2014
-
6. Laminated composite based on polyester geotextile fibers and polyurethane resin for coating wood structures
New environmental laws have restricted the use of hardwood trees in overhead power lines structures, such as, poles and cross-arms, leading companies to seek alternative materials. Reforested wood coated with polymeric resin has been proposed as an environmental friendly solution, with improved electrical properties and protection against external agents, e.
Mat. Res.. Publicado em: 21/06/2013
-
7. Maximization of Fundamental Frequency of Laminated Composite Cylindrical Shells by Ant Colony Algorithm
ABSTRACT: The success in developing modern aerospace systems addresses competitive subjects as optimization, reduced costs, sustainability, environment, weight, and safety. There is an increased demand for lighter materials such as laminated composites. In order to match the demand of aeronautical companies, the shell structures are very important. The dynam
J. Aerosp. Technol. Manag.. Publicado em: 2013-03
-
8. A bending element for isotropic, multilayered and piezoelectric plates
In this paper, a new 12-node triangular element is developed for the analysis of composite plates. Moreover, the stress-strain relations of laminated bending plates, along with the characteristics of composite and piezoelectric materials have also been investigated. Following this, a finite element formulation for smart composite bending plates is proposed.
Lat. Am. j. solids struct.. Publicado em: 2013-03
-
9. Finite element reduction strategy for composite sandwich plates with viscoelastic layers
Composite materials have been regarded as a convenient strategy in various types of engineering systems such as aeronautical and space structures, as well as architecture and light industry products due to their advantages over the traditional engineering materials, such as their high strength/stiffness relation characteristics and their anti-corrosion prope
Mat. Res.. Publicado em: 21/12/2012
-
10. Optimization of laminated composite plates and shells using genetic algorithms, neural networks and finite elements
Structural optimization using computational tools has become a major research field in recent years. Methods commonly used in structural analysis and optimization may demand considerable computational cost, depending on the problem complexity. Therefore, many techniques have been evaluated in order to diminish such impact. Among these various techniques, Art
Latin American Journal of Solids and Structures. Publicado em: 2011
-
11. Otimização estrutural de placas compostas laminadas sujeitas a efeitos aeroelásticos / Structural optimization of laminated composite plates subject to aeroelastic effects
Este trabalho apresenta uma metodologia utilizando técnicas de otimização estrutural para o projeto de placas feitas de material composto laminado sujeitas a interação fluido-estrutura. O procedimento de otimização busca o aumento da velocidade de ut- ter através da maximização das frequências naturais relacionadas aos modos de vibração que est�
Publicado em: 2011
-
12. Análise de cascas abatidas de materiais compósitos laminados simétricos usando o método dos elementos de contorno / Analysis of shallow shells of symmetric composite laminated materials using the boundary element method
Este trabalho apresenta uma formulação do método dos elementos de contorno para o cálculo de deslocamentos em cascas abatidas de materiais compósitos laminados simétricos. A formulação desenvolvida baseia-se no acoplamento da formulação de elasticidade plana (formulação de membrana) e da formulação de placas finas (placas de Kirchhoff ou teoria
Publicado em: 2011