Laser Surface Melting
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. Lower Susceptibility of Laser-irradiated Ti-15Mo Surface to Methicillin-resistant Staphylococcus aureus Cells Adhesion
Extensive data reported the influence of the physicochemical properties on the bacterial adhesion in biomaterials, of which surface roughness of titanium (Ti) can dictates methicillin-resistant Staphylococcus aureus (MRSA) adhesion to orthopedic implants. Herein, we investigated the influence of the Yb:YAG laser texturing of titanium-15molybdenum (TiMo-L) su
Mat. Res.. Publicado em: 23/09/2019
-
2. Effects of Gas Nitriding on Fatigue and Crack Initiation of Ti6Al4V produced by Selective Laser Melting
Selective laser melting (SLM) is an additive manufacturing technique which permits fabrication of three dimensional parts by selectively melting consecutive layers of metallic powder. This allows the production of parts with high geometrical complexity. Titanium alloy Ti-6Al-4V (Ti64) is widely used in industry due to its high strength-to-mass ratio, corrosi
Mat. Res.. Publicado em: 15/07/2019
-
3. Effect of Solid Solution + Double Ageing on Microstructure and Properties in the Layer by Layer of the Z-Y Interface of Inconel 718 alloys Fabricated by SLM
The microstructure in the Z-Y surface of Inconel 718 alloys fabricated by selective laser melting (SLM) shows the relatively homogeneous and irregular fine grain structure after the heat treatment process of 1050ºC solid solution + double ageing. A large number of bulk precipitates were observed on the grain boundary, and the typical dendritic crystallizati
Mat. Res.. Publicado em: 11/10/2018
-
4. High-resolution topography for Digital Terrain Model (DTM) in Keller Peninsula, Maritime Antarctica
Abstract High resolution topography (HRT) surveys is an important tool to model landscapes, especially in zones subjected to strong environmental changes, such as Antarctica, where landform is highly influenced by cryoclasty and permafrost melting. The aim of this work was to obtain a high accurate DTM for Keller Peninsula, Maritime Antarctica. The survey st
An. Acad. Bras. Ciênc.. Publicado em: 26/07/2018
-
5. Investigação sobr o uso da texturização a laser na preparação da superficie a ser recoberta em ferramentas de metal duro para fresamento / Research on the use of laser texturing for the surface preparation of to be coated carbide milling tools
Machining is one of the fundamental manufacturing processes of contemporary industry and coated cemented carbide is the most used cutting tool material. Manufacturing of this kind of tools includes the substrate surface processing previously to coating deposition in order to achieve high adhesion resistance in the substrate-coating interface. The most spread
Publicado em: 2009
-
6. Crescimento de fibras de LiYF4 dopadas com Nd3+ e Er3+ para aplicações em lasers de estado sólido / SINGLE FIBER CRYSTAL GROWTH OF Nd3+ AND Er3+- DOPED LiYF4 FOR SOLID STATE LASER APPLICATIONS
In the present work, we studied the growth of single crystal fibers of LiYF4 (YLF) doped with Er3+ or Nd3+ by the resistive micro-pulling-down (-PD) tecnhique. A new method for crucible preparation was developed to improve the growth process. The use of better-built crucibles allows their use in more than one experiment, increasing the process reproducibilit
Publicado em: 2008
-
7. "Terapia endodôntica associada à irradiação do canal radicular com laser de diodo: avaliação térmica, morfológica, microbiológica e da infiltração marginal apical" / Endodontic root canal therapy usindg diode laser irradiation: thermographic, morphological, microbiological and marginal apical leakge studies
The aim of this study was to evaluate the effects of diode laser irradiation associated with endodontic therapy. The aspects analyzed were: temperature rise at the external root surface, morphological changes at the dentine root walls, apical marginal leakage after root sealing, and microbiological reduction after laser irradiation. The temperature rise in i
Publicado em: 2007
-
8. Tratamento superficial por refusão a laser em aços AISI H13 e AISI 420 / Laser surface melting of steels AISI H13 and AISI 420
A refusão superficial a laser é uma técnica muito promissora para a melhoria das propriedades mecânicas dos aços ferramentas através da homogeneização química e refino da estrutura. O tratamento a laser promove o aquecimento e resfriamento rápidos da camada superficial resultando em transformações microestruturais que promovem a melhoria do desem
Publicado em: 2006
-
9. Ablação de resinas compostas com laser de Er:YAG sob diferentes fluxos de água / Er:YAG laser ablation of composite resin different water flows
Laser in Dentistry is used in several ways. Er:YAG laser has proved to be an efficient tool for removal of composite resin restoration. It is well-known that the lack or the excess of water may make difficulties for the ablation process with this laser, due to its emission wavelength (2940nm) to coincide with the main water absorption peak. The aim of the pr
Publicado em: 2006
-
10. Microstructural changes due to laser surface melting of an AISI 304 stainless steel
Several techniques can be used to improve surface properties. These can involve changes on the surface chemical composition (such as alloying and surface welding processes) or on the surface microstructure, such as hardening and melting. In the present work surface melting with a 3kW CO2 cw laser was done to alter surface features of an AISI 304 stainless st
Materials Research. Publicado em: 2001
-
11. Cristalização uniforme e seletiva de materiais semicondutores amorfos utilizando pulsos curtos de uma fonte de luz laser
We have investigated the laser induced crystallization of amorphous semiconductors using short-pulses (5-7 ns wide) from the second harmonic (l = 532 nm) of a Nd:Yag laser source. The main studied material was the amorphous germanium (a-Ge), while some alloys like its hydrogenated counterpart (a-Ge:H), silicon-germanium (a-SiGe) and germanium nitride (a-GeN)
Publicado em: 1998
-
12. Configurational diffusion down a folding funnel describes the dynamics of DNA hairpins
Elucidating the mechanism of folding of polynucleotides depends on accurate estimates of free energy surfaces and a quantitative description of the kinetics of structure formation. Here, the kinetics of hairpin formation in single-stranded DNA are measured after a laser temperature jump. The kinetics are modeled as configurational diffusion on a free energy
The National Academy of Sciences.