Liquid Metals
Mostrando 1-12 de 102 artigos, teses e dissertações.
-
1. AVALIAÇÃO DE METAIS POTENCIALMENTE TÓXICOS EM CHORUME PROVENIENTE DE ÁREA DE DEPOSIÇÃO DE RESÍDUOS SÓLIDOS EM BELÉM - PARÁ
The formation of solid waste is a global challenge regarding environmental preservation. Due to the lifestyle of modern society, which aims to improve practicality, new products are constantly being released in the market and increasing the formation of waste. The decomposition of waste from various origins produces a dark liquid named leachate, which presen
Química Nova. Publicado em: 2022
-
2. Biosorption Potential of the Aspergillus sp. and Insights into Secondary Metabolism in the Presence of Copper and Lead
The fungus Aspergillus sp. was isolated from copper mining rejects and cultured in a liquid culture medium (potato dextrose, PD) enriched with CuSO4.5H2O and Pb(NO3)2 in different concentrations. By flame atomic absorption spectrometry (FAAS) it was observed that fungus absorbed 86% of both copper and lead, with initial concentrations of 100, 500 and 1000 mg
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
3. Automatized Separation of Fractions from Petroleum Based on Spectrophotometric Signal Derivative Using Open-Source Hardware for the Determination of Ni and V Linked to Porphyrins
An automated method based on open-source hardware was created for the separation of porphyrins fractions from crude oil, an essential step for the quantification of V and Ni as metalloporphyrins. Preparative liquid chromatography was implemented with a reverse phase gradient from MeOH to toluene. The system allows three solvents and fractions changes by usin
J. Braz. Chem. Soc.. Publicado em: 23/05/2019
-
4. Cupriavidus necator strains: zinc and cadmium tolerance and bioaccumulation
ABSTRACT: Among soil microorganisms, the genus Cupriavidus has garnered particular scientific, economic and ecological interest because of its ability to fix nitrogen and tolerate high concentrations of metals. The aim of this study was to analyze four strains of Cupriavidus necator for their ability to tolerate and bioaccumulate cadmium and zinc. The tolera
Sci. agric. (Piracicaba, Braz.). Publicado em: 2018-12
-
5. Monitoring and risk assessment due to presence of heavy metals and pesticides in tea samples
Abstract Tea is one of the most consumed beverages after water, but unfortunately the application of pesticides and heavy metals in crops make it unsafe for use. This research was conducted to evaluate the risk of heavy metals and pesticides in samples of natural source tea (gardens) and different local market brands. High Performance Liquid Chromatography
Food Sci. Technol. Publicado em: 21/09/2018
-
6. Movimiento de las interfases durante la solidificación horizontal de aleaciones estaño-zinc
ABSTRACT Solidification processing is one of the important routes to produce materials, especially metals and alloys. The parameters for the transformation from liquid to solid, such as the temperature gradient, the growth rate, the cooling rate, the interphase velocity, vary from process to process and in one process also as a function of time and space. Th
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Tolerance to and Accumulation of Cadmium, Copper, and Zinc by Cupriavidus necator
ABSTRACT Preliminary results of in vitro experiments with multicontaminated soils and solid media indicated that nodulating diazotrophic bacteria of the genus Cupriavidus are promising for the remediation of contaminated environments due to their symbiosis with legumes and metal tolerance. Thus, strains of Cupriavidus spp. (LMG 19424T, UFLA 01-659, UFLA 01-6
Rev. Bras. Ciênc. Solo. Publicado em: 08/03/2018
-
8. Potentially mobile of heavy metals on the surface sediments in tropical hyper-saline and positive estuaries
ABSTRACT Estuarine sediments represent important pools of trace metals, released from both anthropogenic and natural sources. Fluctuations in the water column physicochemical conditions, on the other hand, may transfer metals from solid to liquid compartment and resulting in contamination of the surrounding environment. The present research was carried out t
An. Acad. Bras. Ciênc.. Publicado em: 2017-12
-
9. Cellulose Oxidation and the Use of Carboxyl Cellulose Metal Complexes in Heterogeneous Catalytic Systems to Promote Suzuki-Miyaura Coupling and C-O Bond Formation Reaction
This work shows the modification of microcrystalline cellulose by the selective oxidation of primary hydroxyl groups to carboxylate groups by a 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated system and its application as a heterogeneous ligand by ionic exchange with catalytic metals ions such as palladium, nickel and copper. Afterwards is desc
J. Braz. Chem. Soc.. Publicado em: 2017-11
-
10. Determination of Traces of Ni, Cu, and Zn in Wastewater and Alloy Samples by Flame-AAS after Ionic Liquid-Based Dispersive Liquid Phase Microextraction
A procedure has been developed for simultaneous separation/preconcentration of copper, nickel, and zinc based on in situ ionic liquid-based dispersive liquid-liquid microextraction method as a prior step to their determination by flame atomic absorption spectrometry. The analytes reacted with sodium diethyl dithiocarbamate at pH 7 to form hydrophobic chelate
J. Braz. Chem. Soc.. Publicado em: 2017-05
-
11. Predicting Secondary-Dendrite Arm Spacing of the Al-4.5wt%Cu Alloy During Unidirectional Solidification
Mechanical properties and performance of metallic materials depend on their microstructures. In order to develop engineering materials that match prescribed criteria and to enable design with multifunctional materials, it is essential to be able to predict their microstructural patterns, such as size, shape, and spacing of the dendritic structures observed i
Mat. Res.. Publicado em: 24/11/2016
-
12. APPLICATION OF THERMAL PLASMA FOR INERTIZATION OF SLUDGE PRODUCED DURING TREATMENT OF LANDFILL LEACHATE
One of the outstanding issues of concern by governments and society in general relates to the final destination of solid waste, which can bring severe impacts on social, political, economic and environmental dimensions. The sustainable development of enterprises and industries goes for the care of the planet, thus ensuring the quality of life for future gene
Quím. Nova. Publicado em: 2016-09