Liquid Simulations
Mostrando 1-12 de 127 artigos, teses e dissertações.
-
1. Isolation, in vitro and in silico Evaluation of Phenylethanoid Glycoside from Arrabidaea brachypoda as Lipoxygenase Inhibitor
Lipoxygenase (LOX) plays an important role in inflammatory processes and Arrabidaea brachypoda (DC.) Bureau (Bignoniaceae) has been described as presenting anti-inflammatory activity. Therefore, the objective of this study was to develop a high-performance liquid chromatography (HPLC) procedure to directly recognize LOX inhibitor compounds in A. brachypoda c
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
2. Effects of soil-structure interaction in seismic analysis of buildings with multiple pressurized tuned liquid column dampers
Abstract In this paper soil-structure interaction (SSI) effects are investigated while an array of Pressurized Tuned Liquid Column Dampers (PTLCD) is employed for seismic vibration control of buildings. This device represents the most general case of a passive damper, with different reduction options to other control devices obtained by simplifying the invol
Lat. Am. j. solids struct.. Publicado em: 12/09/2019
-
3. Phase-Field Simulation for Non-isothermal Solidification of Al-Cu Binary Alloy
Based on the principle of dilute solution approximation, a phase field model for dendritic growth during the non-isothermal solidification process was proposed by coupling the phase field, concentration field and temperature field, and was adopted to investigate the dendritic growth of Al-Cu binary alloy during the non-isothermal solidification process. Also
Mat. Res.. Publicado em: 02/09/2019
-
4. SIMULAÇÃO DE COMBUSTÃO DO POLIBUTADIENO LÍQUIDO HIDROXILADO, PERCLORATO DE AMÔNIO E ALUMÍNIO EM FORMULAÇÕES DE PROPELENTE SÓLIDO COMPÓSITO
The present work presents combustion simulations of hydroxyl-terminated liquid polybutadiene loaded with ammonium perchlorate and aluminum, using Chemkin software and the “Plug Flow” type reactor. These materials are widely used in solid composite propellant formulations. Through this study, the effect of parameters of axial velocity, equivalence ratio,
Quím. Nova. Publicado em: 2019-02
-
5. Study of Glass Forming on Cu60.0Zr32.5Ti7.5 Alloy by Molecular Dynamics Simulation
This paper presents the results of Molecular Dynamics (MD) simulations of Cu60.0Zr32.5Ti7.5 alloy through the open source code LAMMPS. Amorphous samples were produced by quenching the molten metal from 2300 to 300 K. The pair distribution functions of the liquid and solid were calculated. Moreover, the atomic short-range order at 800, 700 and 300 K was obtai
Mat. Res.. Publicado em: 21/12/2017
-
6. Development of Synthetic Slag with Marble Waste and Calcium Aluminate Agents for Cast Iron Desulfurization
The aim of this work was to study the use of slags to desulfurize cast iron. It was proposed to use alumina instead of fluorspar. In addition, marble waste was used instead of lime. Simulations applying Thermo-Calc® software were carried out in order to obtain the theoretical phases using thermodynamic data. Then, a comparison between theoretical data and e
Mat. Res.. Publicado em: 13/07/2017
-
7. SELF-SIMILARITY OF VERTICAL BUBBLY JETS
AbstractAn integral model for vertical bubbly jets with nearly monodisperse bubble sizes is presented. The model is based on the Gaussian type self-similarity of mean liquid velocity, bubble velocity and void fraction, as well as on functional relationships for initial liquid jet velocity and radius, bubble diameter and relative velocity. Adjusting the model
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
8. Simulation of the Microstructural Evolution of Pure Material and Alloys in an Undercooled Melts via Phase-field Method and Adaptive Computational Domain
The phase-field methods were developed mainly for studying solidification of pure materials, being then extended to the solidification of alloys. In spite of phase-field models being suitable for simulating solidification processes, they suffer from low computational efficiency. In this study, we present a numerical technique for the improvement of computati
Mat. Res.. Publicado em: 2015-06
-
9. Three-dimensional simulation of liquid flow on a sieve tray under different inclinations
The fluid state on a sieve tray will change when the towers tilt under wind loads. A computational fluid dynamics (CFD) model was used to predict the flow patters and hydraulics on the tray under different inclinations. The gas and liquid phases are modelled with the volume-of-fluid (VOF) framework as two inmiscible phases. Several three-dimensional transien
Braz. J. Chem. Eng.. Publicado em: 2014-12
-
10. Simulações de líquidos super-resfriados via dinâmica molecular
This work presents the study of two models of glass-forming liquids using molecular dynamics simulations. The first model aims to analyze the effects on glassy dynamics which allow the enhancement of the glass formability on metallic glass formers. The Pd45Ni55 binary alloy and the Pd35Ni55Pt10 ternary one are modeled via the Embedded Atom method interaction
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/10/2012
-
11. Effect of particle clusters on turbulence modulations in liquid flow laden with fine solid particles
Studies on particle distributions and interactions between the particles and the liquid turbulence are extremely significant and can help to improve efficiency of industrial processes and final product quality. In this paper, the particle distribution and the particle - turbulence interaction in the solid - liquid flow were investigated in detail by a numeri
Brazilian Journal of Chemical Engineering. Publicado em: 2011-09
-
12. Simulação do escoamento monofásico em um estágio de uma bomba centrífuga utilizando técnicas de fluidodinâmica computacional
Oil production and exploration techniques have evolved in the last decades in order to increase fluid flows and optimize how the required equipment are used. The base functioning of Electric Submersible Pumping (ESP) lift method is the use of an electric downhole motor to move a centrifugal pump and transport the fluids to the surface. The Electric Submersib
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/12/2010