Load Carrying
Mostrando 1-12 de 69 artigos, teses e dissertações.
-
1. Flexural Strengthening of Reinforced Concrete Beams Using Carbon Fiber Reinforced Polymer (CFRP) Sheets with Grooves
Abstract The most common method used to strengthening, rehabilitation or repairing of reinforced concrete (RC) members is to use external carbon fiber reinforced polymer (CFRP) sheets. CFRP can greatly improve the flexural and shear capacity of deteriorated members and therefore extends their useful life. The main problem of external CFRP is the debonding of
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
2. Aspects of Finite Element Modeling of Punching Shear Behavior of Reinforced Concrete Flat Slabs
Abstract A series of nonlinear FE analyses was conducted in this paper to model the punching shear failure of RC flat slabs. The analyses were carried out in the software DIANA using three-dimensional continuum elements. These analyses involve the test of different modeling choices in order to evaluate their influences on punching shear failure modeling. The
Lat. Am. j. solids struct.. Publicado em: 04/10/2018
-
3. Reinforced Concrete Beam-Column Inverted Knee Joint Behaviour after Ground Corner Column Loss-Numerical Analysis
Abstract Beam-column joints are critical component in the load path of reinforced concrete (RC) frames, due to their role in transferring loads among different RC frame components. The loss of a ground corner column in a RC frame turns an exterior joint into an inverted knee joint and recent code provisions for exterior joints are not sufficient to knee join
Lat. Am. j. solids struct.. Publicado em: 04/10/2018
-
4. Carbon based DLC films: Influence of the processing parameters on the structure and properties
ABSTRACT Hydrogenated carbon-based films, such as DLC (“Diamond Like Carbon”), have interesting properties such as excellent tribological behavior, low friction coefficient, high superficial hardness and good wear resistance; they are chemically inert and highly corrosion resistant. They are deposited by means of PACVD (plasma-assisted chemical vapor dep
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Soil Stabilization with Lime for the Construction of Forest Roads
ABSTRACT The mechanical performance of soil stabilization using lime to improve forest roads was assessed. This study was conducted with lateritic soil (LVAd30) using lime content of 2% in the municipality of Niquelândia, Goiás state, Brazil. Geotechnical tests of soil characterization, compaction, and mechanical strength were performed applying different
Floresta Ambient.. Publicado em: 19/02/2018
-
6. Evaluation of anaerobic threshold in non-pregnant and pregnant rats
ABSTRACT Several studies present different methodologies and results about intensity exercise, and many of them are performed in male rats. However, the impact of different type, intensity, frequency and duration of exercise on female rats needs more investigation. From the analysis of blood lactate concentration during lactate minimum test (LacMin) in the s
An. Acad. Bras. Ciênc.. Publicado em: 07/12/2017
-
7. Uso de heroína inyectada y el riesgo de hepatitis C en tres ciudades de Colombia
ABSTRACT: Introduction: Hepatitis C is one of the most neglected diseases by governments internationally. Objective: Identify the prevalence of hepatitis C and associated injection drug users in three cities of factors Colombia. Methods: Cross-sectional study of 668 injecting drug users recruited through respondent-driven sampling, inquired about demog
Rev. bras. epidemiol.. Publicado em: 2017-07
-
8. Structural Behavior of SFRC Beams strengthened with GFRP Laminates: An Experimental and Analytical Investigation
ABSTRACT This paper presents the experimental results of a reinforced concrete beams (RC) strengthened with internal steel fibers (SF) and external glass fiber reinforced polymer laminates (GFRP). The research work studied the load carrying capacity, deformation, crack width and ductility of the reinforced concrete beams strengthened with different steel fib
Braz. arch. biol. technol.. Publicado em: 23/01/2017
-
9. Effects of Key Factors on Hull Girder Ultimate Strength Estimation by Progressive Collapse Calculations
Abstract The estimation of the ship hull girder ultimate strength under vertical bending moments as close to real behavior is vital both for design stage or seagoing life. The maximum load carrying capacity of ship hulls called ultimate strength depends on a number of factors including the strength of the structural material, initial distortions, dimensions
Lat. Am. j. solids struct.. Publicado em: 2016-12
-
10. Functional Characteristics Improvement of Metal Transformable-Volume Structures for Space Applications
ABSTRACT Under conditions of the influence of space environment factors, the thin-walled load-carrying transformable-volume structures are subjected to volumetric deformation and long-time exposure to external loads, close to maximum permissible design values. The required functional properties of transformable-volume structures are ensured on the basis of a
J. Aerosp. Technol. Manag.. Publicado em: 2016-03
-
11. Transverse Motions of Rectangular Plates Resting on Elastic Foundation and Under Concentrated Masses Moving at Varying Velocities
AbstractThis study concerns the dynamic characteristics of a prestressed isotropic, rectangular plate continuously supported by an elastic foundation and carrying accelerating mass M. Closed form solutions of the governing fourth order partial differential equations with variable and singular coefficients are presented. For the two-dimensional plate problem,
Lat. Am. j. solids struct.. Publicado em: 2015-07
-
12. Shear Strengthening of RC Deep Beams with Sprayed Fiber-reinforced Polymer Composites (SFRP): Part 2 Finite Element Analysis
AbstractThis paper presents the finite element analysis conducted on SFRP strengthened reinforced concrete (RC) deep beams. The analysis variables included SFRP material (glass and carbon), SFRP thickness (3 mm and 5 mm), SFRP configuration and strength of concrete. The externally applied SFRP technique is significantly effective to enhance the ultimate load
Lat. Am. j. solids struct.. Publicado em: 2015-07