Loads On Structures
Mostrando 1-12 de 87 artigos, teses e dissertações.
-
1. Finite strip method computer application for buckling analysis of thin-walled structures with arbitrary cross-sections
Abstract The Direct Strength Method (DSM) is a well-known formulation presented in the Brazilian standard ABNT NBR 14762:2010, that estimates the strength capacity of cold-formed steel (CFS) members. However, this formulation requires the elastic critical buckling loads as point of departure, regarding local (L), distortional (D) and global (G) modes, which
REM, Int. Eng. J.. Publicado em: 2021-09
-
2. Optimization of geometrically nonlinear truss structures under dynamic loading
Abstract The goal of this article is to present the formulation of the optimization problem of truss structures with geometric nonlinearity under dynamic loads and provide examples of this problem. The formulated optimization problem aims to determine the cross-sectional area of the bars that minimizes the weight of the structure, imposing constraints on nod
REM, Int. Eng. J.. Publicado em: 2020-09
-
3. Structural reliability model considering mixed probabilistic and interval variables
Abstract Traditional probability-based structural reliability analysis method can only consider random uncertainties described by random distribution functions, which required sufficient experimental samples. On comparison, interval uncertainties can be more appropriate when lacking information. In realistic situations, several structural reliability models
Lat. Am. j. solids struct.. Publicado em: 17/01/2020
-
4. Reliability-based calibration of Brazilian structural design codes used in the design of concrete structures
Resumo Este artigo apresenta a calibração, baseada em confiabilidade, dos coeficientes parciais de segurança das normas brasileiras utilizadas no dimensionamento de estruturas de concreto. O trabalho está fundamentado na teoria de confiabilidade, que permite uma representação explícita das incertezas envolvidas em termos das resistências e ações. N
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
5. Aerodynamic effects on a high slenderness concrete chimney
Resumo Este trabalho apresenta os resultados da determinação teórico-experimental do comportamento aerodinâmico de uma chaminé esbelta de concreto armado, com 150m de altura e esbeltez 30. Foram construídos dois modelos reduzidos: um rígido para medição das pressões e outro aeroelástico, reproduzindo as principais características dinâmicas da es
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
6. Revised formula for predicting the long-term deflection multiplier of normal and high strength concrete
Abstract High strength concrete (HSC) has found many applications in civil engineering structures such as in high-rise buildings, and bridges. The mechanical properties of HSC are sometimes different than of normal strength concrete (NSC). In particular, HSC possess lower creep strains compared to NSC. As a result, members constructed using HSC have been fou
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
7. Experimental evaluation on the structural behavior of truss shear connectors in composite steel-concrete beams
Resumo As estruturas mistas apresentam grandes vantagens quanto a aspectos estruturais e construtivos, sendo os conectores de cisalhamento determinantes para a obtenção da interação entre os elementos estruturais e para a distribuição dos esforços na estrutura, aproveitando-se de forma efetiva da potencialidade de cada material constituinte da estrutu
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
8. Assessment of a conservative approach for restoration of extensively destroyed posterior teeth
Abstract Extensive restorations in posterior teeth always bring doubts to the clinicians regarding the best protocol, mainly when structures of reinforcement were lost. Objective This study aimed to evaluate the effect of beveling on the fracture resistance and pattern of class II (MOD) restored teeth. Methodology Ninety human premolars were randomly ass
J. Appl. Oral Sci.. Publicado em: 12/08/2019
-
9. A methodology to investigate the influence of the fillet radius on the buckling of integrally stiffened panels
Abstract The use of integrally stiffened panels (ISP's) in wings of small and medium-sized aircraft is frequent in aviation. These thin-walled structures are often subjected to compressive loads during their life-time and, although the finite element method has become an important tool for engineers to obtain the buckling load of structural members, some res
Lat. Am. j. solids struct.. Publicado em: 22/07/2019
-
10. Analytical determination of the vibration frequencies and buckling loads of slender reinforced concrete towers
Abstract This study focused on improving the design of slender structures with reinforced concrete (RC) telecommunication towers as the main application. Analytical procedure based on Rayleigh’s method to compute the first natural vibration frequency and the critical buckling load was development. All the nonlinearities present in the system were considere
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
11. WIND EFFECTS ON FOUNDATIONS OF SILOS AND LIGHT STRUCTURES: SOLUTION BY USE OF STEEL PILES IN DIABASIC SOIL
ABSTRACT Wind solicitations generate horizontal, tensile, and compressive stresses on building foundations. In empty light structures, such as agricultural greenhouses and, in the specific case of silos and elevated structures such as metal water tanks, the consideration of these loads becomes important because the lack of the weight component due to the sto
Eng. Agríc.. Publicado em: 19/06/2019
-
12. GFEM STABILIZATION TECHNIQUES APPLIED TO DYNAMIC ANALYSIS OF NON-UNIFORM SECTION BARS
Abstract The Finite Element Method (FEM), although widely used as an approximate solution method, has some limitations when applied in dynamic analysis. As the loads excite the high frequency and modes, the method may lose precision and accuracy. To improve the representation of these high-frequency modes, we can use the Generalized Finite Element Method (GF
Lat. Am. j. solids struct.. Publicado em: 29/10/2018