Low Grade Ore
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. Short-term mine scheduling targeting stationary grades
Abstract In short-term mine planning, mining scheduling is generally defined by designing dig-lines, allocated on benches. The mined ore will be sent to stockpiles, homogenization piles, or a concentration plant. The process to design dig-lines is usually done manually, whereby multiple simultaneous mining fronts are time-consuming and labour-intensive. The
REM - International Engineering Journal. Publicado em: 2022
-
2. Role of the reducing agent in tungsten extraction by chlorination with chlorine from an ore enriched by physical means
Abstract The effect of three reducing agents (sulphur dioxide, pyrite and carbon) on tungsten extraction from a scheelite-wolframite concentrate with chlorine gas was assessed. A low-grade ore (0.9% w/w WO3) was collected in the San Martín department, San Luis Province, Argentina, and subsequently enriched by physical means (65.73% w/w WO3). The minerals id
REM - International Engineering Journal. Publicado em: 2022
-
3. Development of innovation routes for iron ore using high intensity magnetic separators
Abstract The mineral processing of low-grade iron ores commonly generates large volumes of slime, which are disposed as tailings. Modern mining requires strives to eliminate the use of tailings dams in a maximum effort to increase metallurgical recovery, the security and reduction of the operational cost. This research aims for the recovery of iron contained
REM - International Engineering Journal. Publicado em: 2022
-
4. Technological innovation in Córrego do Sítio Mineração - A study of technical and economic aspects by using sensor-based sorting for refractory gold ore
Abstract The mining sector has a fundamental financial and economical role in the country where it practices these activities. In addition to employment creation and social-cultural development, the mining sector brings economic growth to the country. However, the sector is facing challenges due to COVID-19, incidents involving tailings dam facilities, risin
REM, Int. Eng. J.. Publicado em: 2021-01
-
5. Influence of Mn2+ ions on depression of quartz and spessartine in gondite ore
Abstract Low-grade manganese ores that are composed of manganese oxides, wad, quartz, iron oxides, gibbsite, and especially of spessartine (Mn3Al2(SiO4)3) are known as gondite. Spessartine is a mineral with a high content of silica (SiO2) and alumina (Al2O3) that causes a decrease of the enrichment in manganese oxide concentrates by flotation, giving this o
REM, Int. Eng. J.. Publicado em: 2021-01
-
6. Effective density concentration in refractory gold ore for characterization purposes
Abstract This article evaluates the efficiency, benefits and limitations of pre-concentration by density separation for process mineralogy studies of low-grade gold ore. The pre-concentration by density aims to generate a product with a high content of gold and to maximize the number of gold-bearing particles characterized, thereby increasing the representat
REM, Int. Eng. J.. Publicado em: 2020-12
-
7. Heterogeneity test for optimising nickel sampling protocols
Abstract Fundamental Sampling Error (FSE) is generated whenever a sample is taken from a lot of particulate material and is caused by an intrinsic characteristic of every mineral deposit: the constitutional or intrinsic heterogeneity of the ore. FSE is the only error that can never be eliminated in sampling processes, but it can be reduced to acceptable valu
REM, Int. Eng. J.. Publicado em: 2020-06
-
8. Reduction Behavior of Low Grade Iron Ore at Reducing Conditions Simulating Different Zones of Blast Furnace
Representative technological samples for Baharia iron ore are collected from El-Gedida iron ore mines at the western desert of Egypt. Baharia iron ore was fired at 1000ºC for 3 hours, then the green and fired samples was isothermally reduced by different ratios of H2/CO/CO2/N2 which closely represent the theoretical reduction conditions in different zones o
Mat. Res.. Publicado em: 02/09/2019
-
9. Evaluation of grinding circuits for iron ore
Abstract Grinding has become one of the most important unitary operations for producing pellet feed for direct reduction from low-grade ores and small liberation size, such as compact itabirites. The aim of this study was to evaluate and compare two grinding circuits in an industrial iron ore plant, by evaluating the current operation through sampling, indus
REM, Int. Eng. J.. Publicado em: 2019-03
-
10. Simultaneous use of direct and reverse flotation in the production of iron ore concentrate plant
Abstract The exploitation of low-grade iron ore deposits represents the current scenario for this business. Thus arise several types of research that aim at improvements and innovations as solutions to such situation. Therefore, herein, suggested is an alternative route for iron ore flotation that targets a higher mass recovery with concentrate within the ma
REM, Int. Eng. J.. Publicado em: 2018-04
-
11. LEACHING Zn FROM THE LOW-GRADE ZINC OXIDE ORE IN NH3-H3C6H5O7-H2O MEDIA
Abstract In this research, the effect of different citric acid concentrations, ammonia concentration, temperature, leaching time, stirring speed and liquid-to-solid ratio on the zinc leaching from low-grade zinc oxide ore in a NH3-H3C6H5O7-H2O system were studied. The results showed that the zinc leaching rate is only 4.7% when the citric acid concentration
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
12. Concentration of manganese tailings via reverse flotation in an acid médium
Abstract Beneficiation of manganese ores has been conducted around the world by circuits composed basically of crushing, screening and spiral classifier. Therefore, solely the coarse size fractions (and commonly the richest) are actually recovered: "lump" (-75+9mm) and "sinter feed" (-9+0.15mm). In the industrial plant which processes the ore from the Azul M
Rem: Rev. Esc. Minas. Publicado em: 2016-03