Material Dispersion
Mostrando 1-12 de 122 artigos, teses e dissertações.
-
1. Characterization of Commercially Available Turmeric for Use in Pharmaceutical Products and Food Supplements
We addressed some physicochemical and biological differences in commercial turmeric, acquired from both handling pharmacies and stores selling natural products for quality assessment. For this, it was determined the melting point, antioxidant activity by 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH), antimicrobial activity via the agar disk-diffusion assay,
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Zeolite-SPION Nanocomposite for Ammonium and Heavy Metals Removal from Wastewater
Minimizing the emission of industrial effluents and realizing the recovery/extraction of key elements such as the rare earths from low concentration solutions, or during water decontamination processes, are some of the biggest challenges of modern society. Accordingly, the preparation and characterization of a low cost recyclable and reusable superparamagnet
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
3. AVALIAÇÃO DE NANOTUBOS DE CARBONO FUNCIONALIZADOS VISANDO O DESENVOLVIMENTO DE MÉTODOS DE PRÉ-CONCENTRAÇÃO DE ÍONS METÁLICOS E DETERMINAÇÃO POR TÉCNICAS ESPECTROMÉTRICAS E ELETROANALÍTICAS
This review focuses on the use of functionalized carbon nanotubes (CNTs) on the development of preconcentration methods with substantial contributions on selectivity and sensitivity for metal ions determination. CNTs have been usually employed in the development of preconcentration/speciation coupled to spectroanalytical techniques for ions determination at
Quím. Nova. Publicado em: 2020-09
-
4. EVALUATION OF SILICA NANOPARTICLE COLLOIDAL STABILITY WITH A FIBER OPTIC QUASI-ELASTIC LIGHT SCATTERING SENSOR
Abstract Colloidal silica is an important biocompatible, inert and non-toxic material for imaging, therapy, and drug delivery biomedical applications. In this context, the evaluation of colloidal suspensions and their stabilities by a Fiber Optic Quasi-Elastic Light Scattering sensor is proposed. Two different silica nanoparticles were prepared and character
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
5. Obtaining and characterizing dental hybrid composites with clay or silica nanoparticles and boron-aluminum-silicate glass microparticles
Abstract The aim of the present work was the obtaining and characterization of dental hybrid composites using nanoparticles (clay or silica) and boron-aluminum-silicate microparticles. We evaluated the dispersion of the nanofillers when changing their loading among 2.5%, 5%, 10% and 25% wt. Were tested, in the above quantities, four different types of nanofi
Polímeros. Publicado em: 27/06/2019
-
6. Residuos de desmote de algodón aglomerados: su producción y aplicación en la construcción de viviendas
Abstract The feasibility of producing blocks and boards through the agglomeration of cotton ginnig process waste with calcium binders was proven in previous studies. This waste represents a serious problem for ginning plants, which annually produce a high amount of waste without final destination, as is the case in Argentina. The variability of the annual co
Ambient. constr.. Publicado em: 10/06/2019
-
7. Do Irrigation Solutions Influence the Bond Interface Between Glass Fiber Posts and Dentin?
Resumo O objetivo deste trabalho foi avaliar a resistência de união e permeabilidade da interface de pinos de fibra de vidro nos diferentes terços da dentina intrarradicular (cervical, médio e apical) submetidos a diferentes agentes irrigantes. Noventa dentes unirradiculares humanos foram submetidos ao tratamento endodôntico e foram divididos em cinco g
Braz. Dent. J.. Publicado em: 04/04/2019
-
8. Mechanical Behavior of Multiwalled Carbon Nanotube Reinforced 7075 Aluminum Alloy Composites Prepared by Mechanical Milling and Hot Extrusion
In this paper, multiwalled carbon nanotubes (MWCNTs) were synthesized by spray pyrolysis to be used later as material reinforcement in the production of MWCNTs/Al7075 aluminum composites. Both, MWCNTs and MWCNTs/Al7075 composites were microstructurally and mechanically characterized. Scanning electron microscopy (SEM) analysis shows MWCNTs formed by multiple
Mat. Res.. Publicado em: 31/01/2019
-
9. Effect of Preparation Method on the Electrical and Mechanical Properties of PVC/Carbon Nanotubes Nanocomposites
The biggest challenge for the development of carbon nanotubes polymeric nanocomposites is in the suitable dispersion and distribution of the nanometric particles along the polymer matrix. Several preparation methods have been used to obtain nanocomposites, highlighting the mixture with polymer solution followed by solvent evaporation and the hot compacting.
Mat. Res.. Publicado em: 02/08/2018
-
10. The dispersion curve applied in guided wave propagation in prismatic rods.
Abstract The early detection of failures in structures is a subject of great interest in engineering; several of these techniques are linked with the elastic wave propagation, using guided waves is one of these alternatives. Several structures of interest in engineering are laminar arrangements; the wave propagation in this type of structures depends not on
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
11. Preparation, Characterization and Photostability of Nanocomposite Films Based on Poly(acrylic acid) and Montmorillonite
Polyacrylic acid (PAA)/clay mineral (SWy-1) nanocomposites were prepared by intercalation in solution and their photostability was evaluated. For the nanocomposite films containing 5, 10 and 20 wt % in SWy-1 mass occurred intercalation along with some clay exfoliation, while for PAA/30%SWy-1, the intercalation of PAA chains into the clay interlayers was obse
Mat. Res.. Publicado em: 07/05/2018
-
12. Cashew nut shell liquid, a valuable raw material for generating semiconductive polyaniline nanofibers
Abstract Cashew nut shell liquid (CNSL) is an abundant and renewable by-product of the cashew nut industry. It appears to be a valuable raw material for generating semiconductive polyaniline (PAni) nanomaterial with enhanced thermal stability and well-defined nanofiber morphology following a polymerization dispersion process. This study confirms that CNSL a
Polímeros. Publicado em: 15/03/2018