Matrix Materials
Mostrando 1-12 de 500 artigos, teses e dissertações.
-
1. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
2. Otimização da extração de antocianinas presentes no feijão-preto e impregnação do extrato em matriz polimérica natural para uso como indicador de pH
OPTIMIZATION OF THE EXTRACTION OF ANTHOCYANINS PRESENT IN BLACK BEANS AND IMPREGNATION OF THE EXTRACT IN NATURAL POLYMERIC MATRIX FOR USE AS A pH INDICATOR. In this work, a method of extracting natural indicators, anthocyanins, present in black beans was optimized. The best extraction condition was obtained with 50 g of beans and 93 g of water, under agitati
Química Nova. Publicado em: 2022
-
3. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
4. Utilization of the Corncob Agro-Industrial Residue as a Potential Adsorbent in the Biosorption of Bisphenol-A
The presence of plastic waste in water bodies has led to a growing concern due to the impact on human health. Among the most important plastic additive molecules is bisphenol-A (BPA). On the other hand, micro-pollutant removal processes that make use of agro-industrial waste have aroused the interest of researchers. This is because the accumulation of lignoc
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
5. Acid matrix production from treated natural vermiculite-hydrobiotite
Abstract Given the potential of acid-activated clays in adsorptive and catalytic processes, several studies focusing on acid matrices have grown over the years, making it possible to study vermiculite, a mineral composed of a type 2:1 unit cell with tetrahedral and octahedral sheets. Therefore, this work aimed to study vermiculite treated with acids for the
Cerâmica. Publicado em: 2021-06
-
6. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
7. Deduction of Electric Field Module in a Multilayer of Isotropic Materials to Detect Surface Plasmons with a Graphical User Interface
Abstract Electric field module for any isotropic multilayer thin film structure, is presented as analytical deduction. Analytic expressions for the electric field distribution are developed initially for a monolayer isotropic system based on Airy's formulae and boundary conditions, with an incident monochromatic source of light. The transfer matrix method 2�
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
8. Properties of Cu-Co Composite Catalysts for Synthesis of Aliphatic Alcohols
Cu-Co-containing cellulose-based carbon composite materials (Cu-Co/Cel) were formed by a matrix isolation method. Using X-ray diffraction (XRD), transmission electron microscopy (TEM), infrared-Fourier spectroscopy (IR-Fourier spectroscopy), and non-isothermal research methods, the physicochemical properties of the composites were established. The catalysts
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
9. Complex Re-do robotic pyeloplasty using cryopreserved placental tissue: an adjunct for success
ABSTRACT Introduction and Objectives: Management of recurrent ureteropelvic junction obstruction (UPJO) following pyeloplasty presents a challenging clinical problem. Failure of initial pyeloplasty is, in part, secondary to ureteral devascularization and subsequent fibrosis. In this video, we present a case of an anastomotic augmentation with cryopreserved
Int. braz j urol.. Publicado em: 2021-02
-
10. PROPRIEDADES DE PROTEÇÃO TÉRMICA DO CARBETO DE SILÍCIO EM REVESTIMENTOS CERÂMICOS
In recent years, research on the development of protective materials has expanded significantly in order to find efficient and economically viable solutions for application in various industrial segments. Among these materials, those aimed at protecting metallic substrates against high temperatures that end up causing corrosive processes, stand out due to th
Quím. Nova. Publicado em: 2021-01
-
11. Multiresidue Determination of Endocrine Disrupting Compounds in Sewage Treatment Plants (SPE-HPLC-DAD)
This work focuses on the validation and application of solid phase extraction followed by high-performance liquid chromatography (SPE-HPLC) analysis of important endocrine disruptors compounds (EDC) from different classes in highly complex wastewater matrix. The endocrine disruptors investigated included three different categories: pharmaceuticals (sulfameth
J. Braz. Chem. Soc.. Publicado em: 2020-12
-
12. New Magnetic Fe Oxide-Carbon Based Acid Catalyst Prepared from Bio-Oil for Esterification Reactions
In this work, bio-oil (an organic matrix rich in oxygen functionalities) was used to efficiently dissolve and disperse Fe3+ which upon thermal treatment produced a carbon containing dispersed and encapsulated Fe oxide magnetic nanoparticles. These materials were prepared by dissolution of 8, 16 and 24 wt.% Fe3+ salt in bio-oil followed by treatment at 400, 4
J. Braz. Chem. Soc.. Publicado em: 2020-08