Metal Removal
Mostrando 1-12 de 223 artigos, teses e dissertações.
-
1. ENHANCED REMOVAL OF PERSISTENT CONTAMINANTS AND TOXICITY REDUCTION THROUGH THE APPLICATION OF A TRIPLE-STAGE FENTON PROCESS TO SANITARY LANDFILL LEACHATES FROM YUCATAN, MEXICO
Sanitary landfill leachate (SLL) is a mixture of highly toxic and recalcitrant pollutants that threatens the water quality of the Yucatán Peninsula karst aquifer, one of the most extensive aquifers on the planet. To reduce the adverse environmental impacts of this wastewater, a triple-stage Fenton process (FP) was applied in an old SLL. Removal efficiencies
Química Nova. Publicado em: 2022
-
2. SYNTHESIS OF MATERIALS PRODUCED FROM SPENT BATTERIES WITH ENVIRONMENTAL APPLICATION
In this work, alkaline and nickel-metal hydride spent batteries were used as precursors of metals for the synthesis of polymetallic materials. These materials were synthesized via chemical reduction. Materials produced from nickel-metal hydride spent batteries (PM-NiMH) have a nanometric size, whereas the alkaline spent batteries (PM-Alk) have a micrometric
Quím. Nova. Publicado em: 2020-09
-
3. Comparative study of inclusion removal from liquid steel in the RH and argon purging processes
Abstract In order to improve steel quality, it is necessary to increase the cleanliness of the liquid steel; that is, to reduce the number and size of the inclusions in the liquid steel, as well as to control their chemical composition. For this purpose, processes (with different operating costs) are used, such as the bubbling of inert gas in the steel ladle
REM, Int. Eng. J.. Publicado em: 2020-09
-
4. Selective Entrapment of Pb2+ from Fresh Thunbergia laurifolia Leaves Extract and Thunbergia laurifolia Tea Extract
The leaves of Thunbergia laurifolia and its tea were extracted by water. The abilities to chelate heavy metal ions of the extracts were studied by inductively coupled plasma-optical emission spectroscopy (ICP-OES) and atomic absorption spectroscopy (AAS). The results showed that the extracts exhibited high selectivity for Pb2+ chelation via a favourable-sele
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
5. Preparation and application of Zero Valent Iron immobilized in Activated Carbon for removal of hexavalent Chromium from synthetic effluent
RESUMO Diferentemente dos contaminantes orgânicos, os metais pesados não são biodegradáveis e tendem a se acumular nos organismos vivos e também são reconhecidos por serem tóxicos ou carcinogênicos. A utilização de nanopartículas de ferro zero valente (nFVZ) é relatada como uma técnica alternativa e de elevado potencial para remediação in situ
Rev. Ambient. Água. Publicado em: 03/10/2019
-
6. Kinetic Analysis of Lead Removal by Natural Hydroxyapatite from Aqueous Solution in High Concentration
The aim of this work was to study of the kinetic of Pb(II) sorption, in high lead concentration aqueous solution, by the natural hydroxyapatite (HA) and to verify whether there is a different behavior between natural and synthetic HA under different lead concentrations. Batch experiments were carried out using solutions with high lead concentration, with the
Mat. Res.. Publicado em: 30/09/2019
-
7. REMOVAL OF TRIBUTYL PHOSPHATE FROM AQUEOUS SOLUTIONS BY TiO2 HETEROGENEOUS PHOTOCATALYSIS SUPPORTED OVER A NEW METAL PLATE WITH KINETIC STUDY
Abstract The aim of this investigation was to study the degradation of tributyl phosphate (TBP) in aqueous solution by heterogeneous photocatalysis (UV-C/TiO2). To perform the investigation, aqueous solutions containing the contaminant were exposed to UV radiation in the absence or presence of TiO2 in suspension or supported on a Fe-Cr metal alloy plate. TBP
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
8. Técnica de template customizável para remoção de enxerto ósseo de crista ilíaca para reconstruções de defeitos mandibulares.
RESUMO A remoção de enxerto da crista ilíaca anterior é uma boa opção para a reconstrução de defeitos mandibulares após ressecções por trauma ou outras doenças. Para obtenção de resultados clínicos de excelência em cirurgias reconstrutivas com enxertos ósseos, um planejamento pré-operatório preciso e uma refinada técnica cirúrgica são e
Rev. Col. Bras. Cir.. Publicado em: 23/09/2019
-
9. Fe3O4@C core-shell nanoparticles as adsorbent of ionic zinc: evaluating of the adsorptive capacity
Zinc is an important chemical element in many metabolic mechanisms at low concentrations, but can be toxic when administrated in doses higher than 500 µg·g-1 or 3 mg·L-1. This metal has been detected in many aquatic environments due to several industry activities and swine manure effluents. Thus, the contaminant removal of water and wastewater has been a
Mat. Res.. Publicado em: 01/07/2019
-
10. Electrolytic polishing of compacted graphite iron for revealing subsurface graphite of honed cylinders
ABSTRACT The superficial characteristics of honed surfaces are relevant for the tribological performance of cylinders of internal combustion engines (MCI). Recent studies found a correlation between the occurrence of the phenomenon called folded metal and the presence of graphite of cast irons. However, the honing process tends to overlap the graphite, such
Matéria (Rio J.). Publicado em: 20/05/2019
-
11. Biossorção de íons Cr(III) de soluções aquosas sintéticas e efluente de curtume utilizando a macrófita aquática Pistia stratiotes
RESUMO O cromo é um metal tóxico amplamente utilizado em processos industriais, por isso a constante preocupação com os efluentes líquidos gerados. Uma vez lançados sem o devido tratamento podem comprometer a qualidade do corpo receptor. Este trabalho teve por objetivo analisar o processo de biossorção na remoção de íons Cr(III) de soluções aquo
Eng. Sanit. Ambient.. Publicado em: 21/02/2019
-
12. Effect of sol-gel processing parameters on structure of zirconia
Abstract The present study reports the experimental results regarding the effect of molar ratio of hydrolysis water used in the sol-gel synthesis upon the structure of zirconia. The ZrO2 materials were synthesized via simple metal-chelate route using zirconium n-propoxide [Zr(OCH2CH2CH3)4], n-propanol, acetic acid, and deionized water. Thermogravimetric anal
Cerâmica. Publicado em: 2019-01