Method Of The Finite Elements
Mostrando 1-12 de 298 artigos, teses e dissertações.
-
1. 3D Simulation and Artificial Neural Networks Application in the Diffusion Study of Champignon Mushroom/Solution Interface During the Salting
The influence of the film formed during the salting of champignon mushrooms with brine containing NaCl and KCl was modeled using the finite elements method (FEM). It was verified that the film formed on the mushroom surface had a greater influence in the static salting since the diffusion of the ions was 7.5-fold smaller in this system than in the stirred sa
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Fuzzy Boundary for Beams Vibrations in Vehicles
ABSTRACT This work aims to study the transversal motion of a car’s chassis, modeled by a beam and supported at its ends by two sets of spring-damper elements. A finite differences method is utilized along with Robin boundary conditions to solve the mathematical modeling. The constants of the boundary conditions are modeled by a fuzzy parameter obtained thr
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
3. Unplanned dilution back analysis in an underground mine using numerical models
Abstract In underground mines, stability problems can cause unplanned dilution, increasing the costs of mining operations, such as loading, transport, crushing and grinding. This is usually dealt with by simply increasing investments with support. However, the design geometry of stopes and drifts also has a great effect on a stope’s stability. The use of e
REM - International Engineering Journal. Publicado em: 2022
-
4. Numerical analysis of collapse modes in optimized design of alveolar Steel-concrete composite beams via genetic algorithms
Abstract The objective of this study is to present the formulation and applications of the optimization problem of steel-concrete composite alveolar beams. In addition to presenting the formulation, a comparative analysis of the predominant collapse modes is performed numerically via the finite element method. The optimization program was developed with the
REM, Int. Eng. J.. Publicado em: 2021-06
-
5. Optimization of shells modeled using NURBS subjected to a dynamic loading condition
Abstract This study presents an optimization method for the thickness of shell elements subjected to dynamic loads. Structural analyses were carried out using the finite element method. The analyzed domains were modeled using NURBS, and meshes were generated using a transformation of the parametric domain into the geometric domain via a geometric function. T
REM, Int. Eng. J.. Publicado em: 2020-03
-
6. Mathematical Modeling of the Transesterification Reaction by Finite Elements: Optimization of Kinetic Parameters Using the Simplex Sequential Method
The use of biodiesel as fuel has been presented as a viable alternative in the search for renewable energies. It can be produced from the transesterification reaction of vegetable oils with methanol in the presence of sodium or potassium hydroxide as catalysts. In the present research, the transesterification reaction of soybean oil was modeled considering t
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
7. Nonlinear numerical analysis of composite slabs with steel decking
Resumo O comportamento das lajes mistas é governado pelo cisalhamento longitudinal na interface entre o aço e o concreto, que é desenvolvido em lajes sob flexão simples. O método m-k e o método da interação parcial, utilizados no cálculo da resistência ao cisalhamento na interface aço-concreto de lajes mistas, são baseados em ensaios experimentai
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
8. Nonlinear static analysis of a pile-supported wharf
Resumo O objetivo deste artigo é desenvolver uma análise estática não-linear através de um estudo de caso de um cais sobre estacas situado em uma nova área portuária para petroleiras. A atividade sísmica da área é muito intensa com uma aceleração máxima do solo de 0.55 g. Por esta razão, é muito importante analisar o comportamento estrutural n
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
9. Experimental-numerical Technique to Evaluate the Thickness of TiN Thin Film
In this study, the numerical analysis of instrumented indentation testing was combined with the experimental procedure to evaluate the mechanical properties and thickness of a titanium nitride (TiN) film deposited on titanium substrate (Ti) by plasma processing. TiN film thickness is an important parameter for the surface treatment industry. In numerical ana
Mat. Res.. Publicado em: 09/09/2019
-
10. Optimized design of RC deep beams based on performance metrics applied to strut and tie model and in-plane stress conditions
Abstract Deep beams do not behave according to classical beam theory. The nonlinearity of strain distribution within these elements requires application of strut and tie models (STM) or other alternatives to evaluate the complex stress field. Although the design of these elements is a common task for structural engineers, limited research is found on assessi
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
11. Some Aspects of Numerical Modeling of Steel-Concrete Composite Beams with Prestressed Tendons
Abstract Aspects about the numerical modeling of three-dimensional prestressed steel-concrete composite beams by using the finite element (FE) method are highlighted and commented in this work. Emphasis is given to the numerical treatment of bonded and unbonded tendons. The proposed modeling technique uses curved beam and catenary elements for simulating int
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
12. Thermo-mechanical analysis of mass concrete elements made of rubberized concrete
Resumo Neste estudo, foram avaliadas amostras de concreto massa com borracha (concreto emborrachado) para determinar se a adição de partículas de borracha aumentaria a resistência à fissuração devido a variações volumétricas de origem térmica, em comparação com um concreto de referência, sem borracha. Amostras dos concretos estudados foram inic
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019