Microhardness Machine
Mostrando 1-12 de 25 artigos, teses e dissertações.
-
1. Interfacial Properties and Bottom/Top Hardness Ratio Produced by Bulk Fill Composites in Dentin Cavities
Resumo O objetivo deste estudo foi avaliar a resistência de união, razão base/topo de microdureza, adaptação marginal e nanoinfiltração interfacial de resinas compostas bulk fill (BF) e tradicional (RT) de viscosidade regular.: Duas BF (Filtek Bulk Fill e Aura Bulk Fill) e duas RT (Filtek Z250XT e Aura) foram testados. Quarenta cavidades cônicas (4,8
Braz. Dent. J.. Publicado em: 07/10/2019
-
2. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Multiple-peak and single-peak dental curing lights comparison on the wear resistance of bulk-fill composites
Abstract: The effects of tooth brushing could affect the long-term esthetic outcome of composite restorations. This study evaluated the effect of two different emission spectrum light-curing units on the surface roughness, roughness profile, topography and microhardness of bulk-fill composites after in vitro toothbrushing. Valo (multiple-peak) and Demi Ultra
Braz. oral res.. Publicado em: 17/12/2018
-
4. Assessment of Process Parameters by Friction Surfacing on the Double Layer Deposition
The friction surfacing process of two deposited layers on two deposition surface conditions, i.e., a smooth interface and a rough interface, was investigated. The control parameter of the deposition process was the rod feed rate with the use of a conventional milling machine. Analyzes of the surface characterization and microstructural characterization along
Mat. Res.. Publicado em: 19/03/2018
-
5. Mechanical properties, water sorption characteristics, and compound release of grape seed extract-incorporated resins
Abstract Objective This study evaluated the effect of grape seed extract (GSE) incorporation on the mechanical properties, water sorption, solubility, and GSE release from the experimental adhesive resins. Material and Methods An experimental comonomer mixture, consisting of 40% Bis-GMA, 30% Bis MP, 28% HEMA, 0.26% camphorquinone and 1% EDMAB, was used t
J. Appl. Oral Sci.. Publicado em: 2017-08
-
6. Mechanical, antibacterial and bond strength properties of nano-titanium-enriched glass ionomer cement
The use of nanoparticles (NPs) has become a significant area of research in Dentistry. Objective The aim of this study was to investigate the physical, antibacterial activity and bond strength properties of conventional base, core build and restorative of glass ionomer cement (GIC) compared to GIC supplemented with titanium dioxide (TiO2) nanopowder at 3% an
J. Appl. Oral Sci.. Publicado em: 2015-06
-
7. Effect of niobium in the phase transformation and corrosion resistance of one austenitic-ferritic stainless steel
Austenitic-ferritic stainless steels containing 0.2% and 0.5% niobium were evaluated with respect to the microstructures, microhardness, pitting potential resistance, electrochemical impedance and wearing tests. Niobium is an alphagenic element and has a great influence on phase transformation of duplex stainless steels. In the present investigation, the sam
Mat. Res.. Publicado em: 01/08/2014
-
8. Does the casting mode influence microstructure, fracture and properties of different metal ceramic alloys?
The aim of the present study was to evaluate the tensile strength, elongation, microhardness, microstructure and fracture pattern of various metal ceramic alloys cast under different casting conditions. Two Ni-Cr alloys, Co-Cr and Pd-Ag were used. The casting conditions were as follows: electromagnetic induction under argon atmosphere, vacuum, using blowtorc
Brazilian Oral Research. Publicado em: 2012-06
-
9. Analysis of surface hardness of artificially aged resin composites
This study evaluated the effect of artificially accelerated aging (AAA) on the surface hardness of eight composite resins: Filtek Z250, Filtek Supreme, 4 Seasons, Herculite, P60, Tetric Ceram, Charisma, and Filtek Z100. Sixteen specimens were made from the test piece of each material, using an 8.0 × 2.0 mm teflon matrix. After 24 hours, eight specimens from
Materials Research. Publicado em: 20/01/2012
-
10. Análise de sistemas de fixação resinosos : por meio de nanoinfiltração, microdureza e microcisalhamento / Analisys of resin luting systems through nanoleakage
During the cementing indirect restorations procedure using resin luting systems, polymerization is essential for an effective clinical outcome of success. The aim of this in vitro study was to evaluate the Knoop hardness (KHN), microshear bond strength (MSBS) and nanoleakage pattern of resin cements and flowable resin to dental enamel. Ninety-two enamel bovi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/03/2011
-
11. Effect of different light curing methods on mechanical and physical properties of resin-cements polymerized through ceramic discs
OBJECTIVE: The aim of this study was to compare the polimerization ability of three different light-curing units (quartz tungsten halogen, light-emitting diodes and plasma arc) and their exposure modes (high-intensity and soft-start) by determination of microhardness, water sorption and solubility, and diametral tensile strength of 5 dual-curing resin cement
J. Appl. Oral Sci.. Publicado em: 01/07/2011
-
12. Dureza Knoop e resistência da união de cimentos resinosos após a fixação de pinos de fibra em diferentes condições técnicas e regiões da raiz / Knoop hardness and bond strength of resin cements after fixing fiber posts in different technical conditions and regions of root
The objective of this study was to evaluate the bond strength through the push-out test and Knoop microhardness of resin cements after fixation of fiber posts, in the manners conventional, with a flared root and with composite resin relined post, according to root area. From the 60 bovine incisor roots, forty were weakened with diamond bur #4137, and all wer
Publicado em: 2011