Multilayer Structure
Mostrando 1-12 de 46 artigos, teses e dissertações.
-
1. Deduction of Electric Field Module in a Multilayer of Isotropic Materials to Detect Surface Plasmons with a Graphical User Interface
Abstract Electric field module for any isotropic multilayer thin film structure, is presented as analytical deduction. Analytic expressions for the electric field distribution are developed initially for a monolayer isotropic system based on Airy's formulae and boundary conditions, with an incident monochromatic source of light. The transfer matrix method 2�
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
2. INTEGRATING REAL TIME OPTIMIZATION AND MODEL PREDICTIVE CONTROL OF A CRUDE DISTILLATION UNIT
Abstract This work reports the integration of Real Time Optimization and Model Predictive Control in the multi-layer control structure of an existing Crude Distillation Unit (CDU) of an oil refinery. The MPC considers output control zones and targets for the inputs or outputs. Both the infinite horizon and the finite output horizon controllers were tested. T
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
3. Structure and Properties of Dual-doped PEDOT:PSS Multilayer Films
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is the most successful transparent conductive polymer widely used in functional organic devices. However, its potential in fabrication of highly conductive electrodes still has not been fully explored. This paper is an attempt to fill the existing gap of knowledge on possible post-treatments
Mat. Res.. Publicado em: 09/12/2019
-
4. MODELAGEM DA EXPANSÃO DO REFLORESTAMENTO COM EUCALIPTO E EFEITOS NA ESTRUTURA DA PAISAGEM
Resumo Neste artigo trabalhamos uma metodologia combinada de sensoriamento remoto, modelagem ambiental e ecologia da paisagem para análise dos impactos da expansão do reflorestamento com eucalipto na estrutura da paisagem. O uso combinado dessas técnicas possibilitou a simulação de cenários futuros, utilizando-os não apenas como uma ferramenta de aná
Mercator (Fortaleza). Publicado em: 09/12/2019
-
5. Determination of factors affecting dairy cattle: a case study of Ardahan province using data mining algorithms
ABSTRACT This study was conducted to compare predictive performances of different data-mining algorithms for determining factors influencing the average daily milk yield at dairy cattle enterprises of Ardahan province, located in the Eastern Anatolia region of Turkey. The algorithms employed in the present study were Classification and Regression Tree (CART)
R. Bras. Zootec.. Publicado em: 28/11/2019
-
6. Fracture Load and Failure Mode of CAD-on Ceramic Structures
Resumo Este estudo avaliou a carga de fratura (Cf) e o modo de falha de estruturas cerâmicas fabricadas pela técnica CAD-on (Ivoclar Vivadent), testando as hipóteses de que a Cf das estruturas multicamadas é governada pela resistência da cerâmica de cobertura e o lascamento é mais frequente nas estruturas em multicamadas do que em monolíticas. Corpos
Braz. Dent. J.. Publicado em: 22/07/2019
-
7. Role of multi-layer pyramidal truss cores as an inner material of energy absorbing structures
Abstract In this study, finite element analysis was performed to investigate the feasibility of multi-layered pyramidal truss structures as a filler material of energy absorbing tubes. Rectangular tubes with the filler and empty tubes were compressed at a constant velocity of 10km/h and their energy absorbing capabilities were compared to demonstrate the str
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
8. Effect of the Morphology and Structure on the Microwave Absorbing Properties of Multiwalled Carbon Nanotube Filled Epoxy Resin Nanocomposites
The current research shows the effect of structural and morphological differences of multilayer carbon nanotubes (CNT) on radar absorbing materials (RAM) performance. Two CNT samples, from different manufacturers, had their morphological and structural aspects investigated by XRD, SEM and SEM-FEG analyses. CNT/epoxy resin based nanostructured composites were
Mat. Res.. Publicado em: 16/07/2018
-
9. COLUMN GENERATION BASED ALGORITHMS FOR THE CAPACITATED MULTI-LAYER NETWORK DESIGN WITH UNSPLITTABLE DEMANDS
ABSTRACT We investigate a variant of the Multi-Layer Network Design problem where minimum cost capacities have to be installed upon a virtual layer in such a way that (i) a set of traffic demands can be routed AND (ii) each capacity (subband) is assigned a route in the physical layer. The traffic demands cannot be splitted along several paths (nor even sever
Pesqui. Oper.. Publicado em: 2017-09
-
10. EVATUATION SYSTEM OF EXHAUST FANS USED ON VENTILATION SYSTEM IN COMMERCIAL BROILER HOUSE
ABSTRACT: This study aim to develop a system, called FANS-N, for evaluation the exhaust fans in the ventilation system of broiler facilities. The system is divided into: 1) Mechanical Structure - consisting of two stepper motors for positioning a anemometer sensor in the vertical and horizontal coordinates; 2) Electronic Interface - control of the anemometer
Eng. Agríc.. Publicado em: 2017-09
-
11. Fabrication of Multiple Layered Scaffolds with Controlled Porous Micro-Architecture
A multi-layer scaffold that incorporates bioglass, phosphatidylserine and steroidal saponins loaded collagen microparticles was prepared in this study. Combinatorial processing techniques involving porogen leaching protocol and freeze-drying were used. Drug distribution and microstructure could be controlled mainly by the concentrations of drug-loaded collag
Mat. Res.. Publicado em: 16/01/2017
-
12. Thick CrN/NbN Multilayer Coating Deposited by Cathodic Arc Technique
The production of tribological nanoscale multilayer CrN/NbN coatings up to 6 µm thick by Sputtering/HIPIMS has been reported in literature. However, high demanding applications, such as internal combustion engine parts, need thicker coatings (>30 µm). The production of such parts by sputtering would be economically restrictive due to low deposition rates.
Mat. Res.. Publicado em: 19/12/2016